Holland Texas Directional Boring: Branyon Clay, FM 2268 and Cathey Creek
Quick Answer: City of Holland owns its water system; four electric providers report service in Bell County, so we verify the owner before conduit work. We take directional boring, also called horizontal directional drilling (HDD), in Texas for routes beneath Cathey Creek or Franklin Street. Holland is 351 road miles from our Yukon, Oklahoma main office, and that distance matters when planning access near FM 2268. Branyon clay is common in Holland; sticky ground can load the reamer and grip pipe, so staged reaming and fluid control matter.
Holland bores at a glance
- Incorporated city in Bell County, Texas. Population 1,129 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 351 miles, about 6.8 hours of driving.
- Ground: Branyon soil is mapped on 67 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2268, Texas State Highway 95 and FM 1123. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: Union Pacific, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Cathey Creek and Darrs Creek.
- Public water: City of Holland, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Cathey Creek in Holland?
We take directional boring work in Holland, an incorporated town in Bell County with a population of 1,129, according to the Census Bureau Vintage 2024 estimate. Along Franklin Street or near Cathey Creek, our crews can install water, sewer, gas, electric conduit and fiber. We confirm the line owner before planning conduit work, so the design matches the existing utility route.
Our main office is in Yukon, Oklahoma, and Holland work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Holland routes from Travis Street to FM 2268, our work ranges from 3/4 inch service lines to 48 inch casing. We are a family business started in 1965, with directional boring work dating to 1982.

What kind of ground does Holland’s Branyon soil bring to a bore?
The USDA soil survey maps Branyon soil across 67% of Holland, and Branyon clay map units cover much of the town. At about 40 inches below the surface, clay is mapped across 71% of the area and silty clay across 23%; the survey maps heavy clay at that depth across 94%. These are mapped soil patterns, not test borings. On a route near FM 2268, sticky clay can ball up on a reamer and swell around the pipe, so staged reaming and a same day pull can help keep the hole workable.
| USDA soil survey, inside the Holland city limits | What is mapped |
|---|---|
| Soil series mapped | Branyon 67 percent, Krum 20 percent, Sunev 5 percent and Frio 3 percent |
| Texture at the surface | clay 72 percent, silty clay 23 percent and loam 4 percent |
| Texture about 40 inches down | clay 71 percent, silty clay 23 percent and clay loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 94 percent and lean clay (CL) 5 percent |
| Average clay content about 40 inches down | 48 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
Bedrock is not mapped in the top five feet of Holland, but that does not rule out deeper rock along Franklin Street. Seasonal water table conditions are not mapped within 60 inches, while flood prone soils are mapped across 5% of town; a Cathey Creek crossing needs depth planned below the channel. The USDA map identifies Navarro and Taylor groups, undivided, of Late Cretaceous age. High steel corrosion risk is mapped across 95%, so the line owner should weigh casing and tracer wire protection; HDPE is unaffected by that soil corrosion concern.
How do we drill Holland’s clay near Cathey Creek?
Branyon clay and the mapped heavy clay around Holland call for controlled fluid and staged reaming. Near Cathey Creek, we also plan depth and returns so the bore stays under the channel without pushing fluid toward the surface.
- Branyon clay can grip the pipe, so we use staged reaming and keep the Holland pull ready for the day the hole is opened.
- Heavy clay around FM 2268 calls for close attention to fluid returns, helping avoid pressure that could lift pavement.
- Before drilling near Franklin Street, we hydrovac pothole each marked utility on the bore path because surface paint does not show depth.
- At Cathey Creek, we plan the bore below the channel, track the head from the surface and log depth and pitch.

Which roads, tracks or creeks could a Holland bore cross near Franklin Street?
FM 2268, Texas State Highway 95 and FM 1123 run inside Holland, so a route under any of them needs to account for state highway requirements. Franklin Street is the longest named street at 1.48 miles in town; Front Street runs 1.05 miles and Travis Street runs 1.03 miles. These street lengths help identify likely routes, but the actual bore plan follows the address and utility marks. A bore can pass under pavement rather than cutting across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2268 | State highway | 2.1 roadway miles inside | State highway office |
| Texas State Highway 95 | State highway | 1.5 roadway miles inside | State highway office |
| FM 1123 | State highway | 1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.02 track miles inside | The railroad |
| Cathey Creek | Stream | 0.97 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Darrs Creek | Stream | 0.6 channel miles inside | Checked for Corps of Engineers jurisdiction |
| South Darrs Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Flag Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.02 track miles inside Holland on the Waco Subdivision, and 11 mapped street and rail crossings make track location a key planning detail. Cathey Creek runs 0.97 channel miles in town and Darrs Creek runs 0.6; two mapped street crossings of named streams are present. Flood prone soil near a creek changes the planned depth, and creek work is checked for U.S. Army Corps of Engineers jurisdiction. No lakes or ponds are mapped within one mile.
Who approves a Holland bore in Bell County?
Holland is incorporated, so Franklin Street and the other city streets fall under the town’s authority, not Bell County’s. For FM 2268, Texas State Highway 95 or FM 1123, a utility crossing the state right of way needs a TxDOT utility permit. The utility owner files through RULIS, and the TxDOT Waco District reviews it; we prepare the bore plan and profile and work under the owner’s permit. Cover depth depends on line type and the crossed grade, so that detail sets how far below the highway the bore runs. A Union Pacific track crossing also needs an agreement with the railroad.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are already in the ground in Holland near the City of Holland system?
The City of Holland public water system uses purchased surface water and reports 450 service connections serving 1,204 people. That system is a key contact point when a water route approaches Franklin Street or another existing main. Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative report electric service in Bell County. We confirm which owner has the line at the Holland address before setting electric conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Holland | Public water system | Surface water bought from another system | 450 connections, 1,204 people served |
| Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Bell County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Holland’s median housing year at 1987; 18% of homes were built before 1960, 52% from 1960 to 1999 and 30% in 2000 or later. A replacement route near Front Street may have older buried utilities, while newer service near Travis Street still needs a clear path. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows position, not depth.

Where is Holland in relation to Bartlett and our Yukon yard?
Holland is in Bell County at an elevation of 553 feet, with 1.64 square miles of land and ZIP code 76534. Bartlett is 6.7 miles south, Little River-Academy is 7.0 miles northeast, and Salado is 8.6 miles northwest. Belton, the county seat and nearest larger city, is 12.2 miles north. The Yukon yard is 351 road miles away, a 6.8 hour drive, which affects mobilization for a bore on FM 2268 or a creek route.
Places near Holland
- Directional boring in Bartlett: 6.7 miles south
- Directional boring in Little River-Academy: 7 miles northeast
- Directional boring in Salado: 8.6 miles northwest
- Directional boring in Rogers: 10.6 miles east
- Directional boring in Granger: 12 miles south
- Directional boring in Belton: 12.2 miles north
What boring work comes up around Holland’s Travis Street?
- Highway crossing: A bore beneath FM 2268 or Texas State Highway 95 keeps the pavement intact while meeting the permitted alignment.
- Water service: A route toward the City of Holland system needs coordination around its 450 service connections and existing lines.
- Fiber conduit: Along Travis Street, a fiber bore can pass beneath pavement while marked utilities are exposed first.
- Creek crossing: A bore under Cathey Creek needs channel depth planning and a check for federal jurisdiction.
- Rail crossing: A Union Pacific crossing on the Waco Subdivision needs the railroad’s agreement and its requirements for the crossing.
- Street replacement: A route near Front Street can replace an older line without open cutting the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Holland bore under FM 2268?
For a Holland quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near FM 2268 or Cathey Creek makes the crossing detail especially useful, since it affects the bore plan and the utilities we need to expose.
The job details set the price, with Holland’s heavy Branyon clay first because sticky ground can require staged reaming and careful fluid control. The number of utilities crossed and exposed also matters on Franklin Street, as do pavement, pits and excavator time. A Cathey Creek crossing can add depth and planning work. Pipe size, bore length, sand backfill, emergency timing and the 351 road miles from Yukon also affect the scope.
Questions people ask about boring in Holland
Does Trinity take directional boring jobs in Holland and Bell County, and who staffs them?
Yes. We take directional boring work in Holland, Bell County, with our own crews and vetted partner contractor crews available through satellite yards. Trinity stays responsible from the first call through the bore log, whichever crew is at the Franklin Street or FM 2268 jobsite.
Who owns electric lines in Holland, Bell County, and who confirms conduit specifications?
Electric service providers reporting in Bell County include Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. We confirm which owner serves the Holland address before setting conduit specifications, rather than assuming one provider owns the line near Travis Street.
Does Holland or Bell County control Travis Street, and must a bore cut the street?
Holland is incorporated, so Travis Street is a town street rather than a Bell County street. A directional bore can run beneath its pavement without an open cut, subject to the route and utility marks. The street authority handles the city street, while state highway crossings follow TxDOT requirements.
Do older homes near Front Street mean replacement bores may encounter older utilities in Holland?
They can. The American Community Survey 2019 to 2023 estimates place Holland’s median housing year at 1987, with 18% of homes built before 1960. A replacement bore near Front Street needs current utility locates and potholing, since older service routes may not match what surface marks suggest.
Can Branyon soil in Holland corrode steel, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across 95% of Holland, including areas with Branyon soil. The line owner selects any protection for steel casing or tracer wire. HDPE is unaffected by the mapped soil corrosion concern, and the material choice depends on the line design near FM 1123.
What ground does a bore pass through in Holland’s Branyon soil?
The USDA soil survey maps Branyon soil across 67% of Holland. At about 40 inches below the surface, clay covers 71% of the mapped area and silty clay 23%. That sticky ground can build on the reamer and grip pipe, so a route near Cathey Creek needs staged reaming and controlled fluid.
Can I reach Trinity after hours for an urgent bore near Travis Street in Holland?
Yes. A person answers our phone at (405) 409-7423 24 hours a day, including for urgent work near Travis Street. For a Holland emergency, the address and crossing details help us understand the route, including whether it is near FM 2268 or a marked utility.
How early should I call Texas811 for a Holland bore near Franklin Street, and what if marks move?
For a Franklin Street bore, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request. Refresh worn or moved marks through Texas811 before work continues.
What affects the cost of a directional bore near FM 2268 in Holland?
The price depends on the Holland job scope, not one fixed rate. Branyon clay, bore length and pipe size matter, along with utilities that must be crossed and exposed. Pavement on FM 2268, a Cathey Creek crossing, pits, excavator time, backfill and the 351 road miles from Yukon can also affect the work.
Where the Holland facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Holland
- U.S. Census Bureau, TIGER/Line 2024: Holland boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Holland
- U.S. Census Bureau, American Community Survey 2019 to 2023: Holland housing units and year built
- Macrostrat geologic map compilation: map units under Holland
- U.S. EPA Safe Drinking Water Information System: public water systems serving Holland
- U.S. Department of Transportation, North American Rail Network: track owners in Bell County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bell County
- U.S. Geological Survey, Elevation Point Query Service: Holland elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Holland
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Holland
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Holland, Texas
Type the address of your job in Holland. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Holland
Same county: Killeen · Temple · Harker Heights · Fort Hood · Nolanville · Morgan's Point Resort · Troy · Pendleton. All counties: Texas county list.
