trinityboringsolutions.com

Rogers Texas Directional Boring: Houston Black Clay, US 190 and BNSF Railway

Quick Answer: Rogers is an incorporated town, so its city streets belong to the town; we take directional boring, also called horizontal directional drilling (HDD), for lines crossing BNSF Railway in Rogers, Texas. Rogers is 348 road miles from our Yukon, Oklahoma main office, with US 190 among the routes a project may meet. Houston Black soil covers most of the mapped area, and its heavy clay can stick to a reamer and grip pipe. We adjust the fluid and reaming plan to keep the bore controlled.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rogers bores at a glance

  • Incorporated city in Bell County, Texas. Population 1,099 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 348 miles, about 6.7 hours of driving.
  • Ground: Houston Black soil is mapped on 84 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: US 190, FM 437, Texas State Highway 36 and FM 2184. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: BNSF Railway, with 7 mapped street and rail crossings.
  • Public water: City of Rogers, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Rogers near BNSF Railway?

Rogers is an incorporated town, so its city streets belong to the town, not Bell County. The Census Bureau Vintage 2024 estimate puts the population at 1,099. We install water and sewer lines, gas lines, electric conduit and fiber, including routes beneath Prairie Avenue or between properties where an open cut would disrupt the street.

Our main office is in Yukon, Oklahoma, and Rogers work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From a 3/4 inch service line near Prairie Avenue to 48 inch casing beneath BNSF Railway, our equipment covers bores from 10 feet to 5,000 feet. The family business began in 1965 and has done directional boring since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Houston Black soil in Rogers?

The USDA soil survey maps Houston Black soil across 84 percent of Rogers. Its mapped units include Houston Black clay on 1 to 3 percent slopes across 64 percent of the area and on 3 to 5 percent slopes across 21 percent. Heiden-Ferris complex accounts for 10 percent. At about 40 inches below the surface, clay is mapped across 96 percent of the town, with an average clay content of 54 percent. That heavy clay can stay open while drilling, but it can also ball on a reamer and grip pipe as the hole closes.

USDA soil survey, inside the Rogers city limitsWhat is mapped
Soil series mappedHouston Black 84 percent and Heiden 10 percent
Texture at the surfaceclay 96 percent
Texture about 40 inches downclay 96 percent
Engineering class about 40 inches downfat clay (CH) 96 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel96 percent of the area

The soil survey maps weathered bedrock within 60 inches in 2 percent of Rogers, with typical bedrock depth listed as 45 inches. Seasonal water tables within 60 inches and flood prone soils are not mapped. High steel corrosion risk is mapped across 96 percent, so the line owner should consider casing and tracer wire materials or coatings; HDPE avoids that steel corrosion concern. The geologic map identifies the Navarro Group and Marlbrook Marl, undivided, of Late Cretaceous age, including clay, siltstone, mudstone, sandstone and limestone. That range means conditions can change along a bore.

What does it take to bore heavy clay in Rogers?

Houston Black clay is the main ground condition in Rogers. It can hold an open hole, then cling to the reamer or pipe, so we manage fluid and reaming stages around the route and the surface above it.

  1. Houston Black clay can ball on the reamer, so we use thinner drilling fluid and polymer, then enlarge the hole in stages before pulling pipe.
  2. On a route beneath US 190 or a paved Rogers street, we watch fluid returns and pressure so the heavy clay does not lift the surface.
  3. Before the drill approaches any marked utility on Prairie Avenue, we expose it with hydrovac potholing; surface paint indicates location, not depth.
  4. We follow the drill head from the surface and record depth and pitch as it advances beneath BNSF Railway or a Rogers street.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads, tracks or creeks could a Rogers bore cross near Dry Hollow?

US 190, FM 437, Texas State Highway 36 and FM 2184 run inside Rogers. A bore beneath any of those routes needs a path that clears the roadway and its right of way requirements. The longest named streets are Alvin Ailey Street at 2.12 miles, Mesquite Avenue at 1.33 miles and Prairie Avenue at 0.89 miles. Their length and layout can make a trenchless route useful where a line needs to pass beneath a street without cutting its surface.

CrossingTypeMapped extentWho has a say
US 190US highway1.7 roadway miles insideState highway office
FM 437State highway2 roadway miles insideState highway office
Texas State Highway 36State highway1.7 roadway miles insideState highway office
FM 2184State highway1.4 roadway miles insideState highway office
BNSF RailwayRailroad3.84 track miles insideThe railroad
Dry HollowStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Sypert BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Sybert CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Lipan CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Rogers LakeLake or pond18 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 3.84 track miles inside Rogers, and public mapping shows 7 street and rail crossings in town. A crossing needs an agreement with the railroad that owns the track, which sets the casing, depth and flagging details. No named streams are mapped inside town; Dry Hollow runs along or touches the boundary. Rogers Lake is inside the limits, and 0.94 miles of unnamed drainage are mapped in town. A lake or creek crossing is checked for federal water jurisdiction during planning.

Who approves a Rogers bore under US 190?

A bore beneath US 190, FM 437, Texas State Highway 36 or FM 2184 falls under TxDOT utility permitting for the highway right of way. Electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches; pressurized sewer lines also need 60 inches. The utility owner files through TxDOT’s RULIS system for review by the Waco District. We prepare the bore plan and profile for that application. BNSF Railway crossings need an agreement with the railroad, and Dry Hollow is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Bell County near Rogers?

The City of Rogers public water system serves 1,200 people through 482 service connections and uses purchased surface water. Electric utilities reporting service in Bell County include Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the provider at every Rogers address, so we confirm the line owner before planning an electric conduit bore along a street such as Milam Street.

Line ownerWhat it isSourceSize
City of RogersPublic water systemSurface water bought from another system482 connections, 1,200 people served
Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rogers’ median housing year at 1972. The survey estimates that 35 percent of homes were built before 1960, while 17 percent date from 2000 or later. A replacement bore near Mesquite Avenue may need to connect to older buried service, while a newer property may call for a new service route. Before the drill approaches a marked line, we expose it by hydrovac potholing; paint shows a utility’s position, not its depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Rogers in relation to Temple and Bell County?

Rogers is an incorporated town in Bell County, covers 1.03 square miles and sits at an elevation of 537 feet. Its ZIP code is 76569. Buckholts is 7.1 miles southeast, Little River-Academy is 7.7 miles northwest, and Holland is 10.6 miles west. Temple, the nearest larger city, is 15.4 miles northwest; Belton, the county seat, is 17.1 miles northwest. Our Yukon yard is 348 road miles away, about a 6.7 hour drive, which affects mobilization for a bore near US 190.

Places near Rogers

What would we bore beneath Mesquite Avenue in Rogers?

  • Highway crossing: A route beneath US 190 or FM 437 needs a bore plan that clears the roadway and fits the applicable TxDOT permit.
  • Water service: We can route a service toward a property near Mesquite Avenue without cutting across the street surface.
  • Fiber conduit: A conduit route under Alvin Ailey Street can avoid an open trench across this long named street.
  • Rail crossing: A line crossing BNSF Railway needs railroad coordination for casing, depth and flagging before the route is set.
  • Drainage crossing: Near Dry Hollow, we plan the bore around the channel and check jurisdiction during crossing planning.
  • Utility exposure: For a proposed line beneath Mesquite Avenue, we hydrovac pothole marked utilities before drilling near them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Alvin Ailey Street in Rogers?

For a bore near Alvin Ailey Street, tell us where the work is, what will go in the ground, its size and the footage. A map pin or address locates the route; a water service, fiber conduit or sewer line identifies the use. Give the pipe or conduit size and planned length, and include a sketch or plans if available.

Price follows the route and ground conditions, with Houston Black clay first because it can cling to the tooling and pipe. Length and pipe size set the basic scope. Crossings of US 190 or BNSF Railway add planning and permit coordination, while concrete, pavement, drainage crossings and the pits or excavator time affect the work. Mobilization also matters because Rogers is 348 road miles from Yukon. High profile or emergency work can add planning needs.

Questions people ask about boring in Rogers

Does Trinity Boring Solutions take Rogers jobs in Bell County, and how are crews assigned?

Yes. We take directional boring work in Rogers and Bell County, with the project handled by our own crews or a partner drilling contractor we have vetted. You work with Trinity from the first call through the bore log, whether the crew is ours or a partner’s. That keeps the planning and job communication with one contractor.

Which company owns the electric lines in Bell County near Rogers, and who confirms conduit specs?

Several electric providers report service in Bell County: Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. The provider can vary by address in Rogers. We identify the line owner for the proposed route and confirm conduit requirements with that owner before planning a bore near Milam Street.

Who controls Prairie Avenue in Rogers, and can a bore avoid cutting the street?

Prairie Avenue is a city street because Rogers is incorporated; it is not a Bell County road by default. A directional bore can pass beneath the street without an open cut, subject to the route and existing utilities. We expose marked lines before drilling near them so the bore can be planned around what is actually buried.

Could older buried lines near Mesquite Avenue in Rogers need replacement bores?

They could. American Community Survey 2019 to 2023 five year estimates put the median housing year in Rogers at 1972, with 35 percent of homes built before 1960. A replacement route near Mesquite Avenue may connect to older services, while newer construction may need a new line. The address and project plans help determine the bore path.

Does Houston Black soil in Rogers corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 96 percent of Rogers, where Houston Black soil is common. That is a reason for the line owner to consider casing and tracer wire materials or coatings. HDPE avoids the steel corrosion concern. The owner selects suitable materials for a proposed line near Prairie Avenue.

What ground will a bore pass through in Rogers where Houston Black soil is mapped?

Houston Black is the dominant mapped soil series in Rogers, and the USDA soil survey maps clay across 96 percent of the area at about 40 inches below the surface. Average clay content at that depth is 54 percent. The heavy clay can hold the bore open but cling to the reamer, so staged enlargement and fluid control matter.

What bore sizes and lengths can Trinity handle for a job near Milam Street in Rogers?

We handle bores from 3/4 inch service lines up to 48 inch casing, with lengths from 10 feet to 5,000 feet. A route near Milam Street could be a short service connection or a longer utility crossing, depending on the endpoints and obstacles. Send the proposed size and footage so we can assess the scope.

How much notice does Texas811 need for a Rogers bore near Alvin Ailey Street, and what if marks fade?

For an Alvin Ailey Street bore, Texas811 needs a locate request at least two working days before excavation, and no earlier than 14 days before it. If the start moves more than 14 days past the original notice, submit a new request. If marks are moved or worn away, have them refreshed through Texas811 before work continues.

What affects the cost of directional boring under US 190 in Rogers?

The route length and pipe or conduit size matter, along with Houston Black clay, utilities to expose, pavement, drainage crossings, pits and equipment time. A US 190 crossing also brings highway permit planning, while a BNSF Railway crossing requires railroad coordination. Mobilization from Yukon is another job factor because Rogers is 348 road miles from the main office.

Where the Rogers facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rogers

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rogers, Texas

Type the address of your job in Rogers. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rogers

Same county: Killeen · Harker Heights · Fort Hood · Belton · Nolanville · Morgan's Point Resort · Troy · Salado · Pendleton. All counties: Texas county list.