trinityboringsolutions.com

Wyldwood Texas Directional Boring: Edge Soil, Hobbs Creek And Highway 71

Quick Answer: On a Wyldwood bore near Texas State Highway 71, the line owner matters: Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative report service in Bastrop County, while the water provider must be confirmed for the address. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Wyldwood, including work under Texas State Highway 71. Wyldwood is 418 road miles from our Yukon, Oklahoma main office, and Union Chapel Road access affects mobilization. Edge soil covers 54 percent of the mapped area, so sticky clay below the surface can shape reaming and fluid choices.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wyldwood bores at a glance

  • Unincorporated community in Bastrop County, Texas. Population 3,694 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 418 miles, about 8 hours of driving.
  • Ground: Edge soil is mapped on 54 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: Texas State Highway 71, Texas State Highway 21 and FM 1209. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Hobbs Creek, Greens Creek, Cottonwood Creek and Red Gully Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Hobbs Creek in Wyldwood?

On a bore near Hobbs Creek, the electric line owner must be identified from utilities reporting service in Bastrop County, and the water provider for the address must be confirmed before planning. Wyldwood is an unincorporated census designated place with 3,694 people in the 2020 Census count. We install water, sewer, gas, electric conduit and fiber along routes such as Union Chapel Road only after checking the proposed path and existing lines.

Our main office is in Yukon, Oklahoma, and Wyldwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for the mapped Edge gravelly fine sandy loam and the clay below it; our family business began in 1965. Near Hobbs Creek, the reaming and fluid plan has to suit the ground at the crossing.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Wyldwood ground like to bore through Edge soil?

The USDA soil survey maps Edge soil across 54 percent of Wyldwood, with Edge gravelly fine sandy loam on 45 percent of the mapped area. Tabor accounts for 14 percent and Crockett for 13 percent. About 40 inches below the surface, sandy clay loam is mapped under 45 percent of the area, while clay is mapped under 36 percent. That mix can make the upper ground cut readily while deeper clay clings to a reamer. Soil survey patterns guide planning, but they are not test borings at a Union Chapel Road jobsite.

USDA soil survey, inside the Wyldwood mapped community boundaryWhat is mapped
Soil series mappedEdge 54 percent, Tabor 14 percent, Crockett 13 percent, Vernia 7 percent and Wilson 4 percent
Texture at the surfacegravelly fine sandy loam 46 percent, fine sandy loam 37 percent and very gravelly loamy sand 7 percent
Texture about 40 inches downsandy clay loam 45 percent, clay 36 percent and clay loam 10 percent
Engineering class about 40 inches downlean clay (CL) 57 percent, fat clay (CH) 34 percent and silty gravel (GM) 7 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inches15 percent of the area (0 percent hard rock, 15 percent weathered rock)
Seasonal water table within 60 inches12 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel37 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches on 15 percent of Wyldwood; hard bedrock is not mapped within that depth. A seasonal water table is mapped within 60 inches on 12 percent, so pits near Hobbs Creek may need water management. Flood prone soils cover 2 percent, and high steel corrosion risk is mapped on 37 percent, a concern to discuss for steel casing or tracer wire. The Cenozoic Clayey Sand And Sandy Clay Decomposition Residuum includes clay and sand, so a route can change character along its length.

How do we drill Wyldwood sandy clay loam?

On a Wyldwood route through Edge gravelly fine sandy loam and deeper sandy clay loam, we match the drilling fluid and reaming sequence to what the mapped ground suggests, then verify conditions along the bore.

  1. In Edge gravelly fine sandy loam, we stage the reaming and have the pipe ready before the last pass, reducing the time an open hole can cave.
  2. Where clay is mapped beneath Wyldwood, we use a fluid plan suited to sticky ground and watch returns near pavement to avoid lifting the surface.
  3. At a marked crossing along Union Chapel Road, we hydrovac pothole each utility before the drill approaches because paint shows position, not depth.
  4. For a Hobbs Creek approach, we plan the bore depth around the channel, track the drill head from the surface and log depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross in Wyldwood near Texas State Highway 71?

Texas State Highway 71 runs 14.0 mapped roadway miles inside the Wyldwood community boundary. Texas State Highway 21 adds 2.9 miles, and FM 1209 adds 1.5 miles. Union Chapel Road is the longest named local street at 4.07 miles; Leisure Lane runs 2.91 miles and Pope Bend runs 2.35 miles. These routes can put a bore near pavement, driveways and other utilities, so the entry and exit pits need to fit the actual crossing and access available.

CrossingTypeMapped extentWho has a say
Texas State Highway 71State highway14 roadway miles insideState highway office
Texas State Highway 21State highway2.9 roadway miles insideState highway office
FM 1209State highway1.5 roadway miles insideState highway office
Hobbs CreekStream2.45 channel miles insideChecked for Corps of Engineers jurisdiction
Greens CreekStream2 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream1.7 channel miles insideChecked for Corps of Engineers jurisdiction
Red Gully CreekStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Moss BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Maha CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Cedar CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Wyldwood or within one mile outside its boundary, so no local track crossing is identified. Hobbs Creek runs 2.45 channel miles inside the community, Greens Creek 2.0 miles and Cottonwood Creek 1.7 miles. Public mapping shows eight street crossings of named streams. Those creek and drainage approaches need route and depth planning; no lakes or ponds are mapped within one mile.

Who has to sign off on a Wyldwood bore in Bastrop County?

Wyldwood is unincorporated, so it has no city government; the county or state has responsibility for streets and permits. For work in the right of way of Texas State Highway 71, Texas State Highway 21 or FM 1209, the line owner files the utility permit through TxDOT’s online RULIS system. TxDOT’s Austin District reviews it, and we give the utility owner the bore plan and profile. TxDOT rules set minimum cover for highway crossings: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches. Pressurized sewer lines also need 60 inches at crossings; the permit can call for a different depth. A Hobbs Creek crossing is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities own lines in Wyldwood and Bastrop County?

The water provider for a specific Wyldwood address must be confirmed with the county or the local water district before a bore is planned. Electric service is reported in Bastrop County by Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative; that does not establish which one owns a line at a particular Union Chapel Road address. We confirm the line owner before planning a conduit bore, so the route and installation details match the system in the ground.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric CooperativeElectric utilities reporting service in Bastrop CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Wyldwood’s median housing year at 1990. The estimates show 64 percent of housing units built from 1960 to 1999 and 36 percent built in 2000 or later. Along Union Chapel Road, a job may involve replacing an older service or extending a newer one; we do not assume which from the housing age alone. We pothole marked utilities before drilling near them, since surface marks do not show their depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Wyldwood in relation to Webberville?

Wyldwood is an unincorporated community wholly within Bastrop County, with a mapped area of 11.33 square miles and an elevation of 513 feet. Its ZIP code is 78612. Cedar Creek is 3.8 miles southwest, Webberville is 6.9 miles north and Garfield is 7.2 miles northwest. Bastrop, the county seat and nearest larger city, is 9.6 miles east. Our Yukon, Oklahoma main office is 418 road miles away, an 8.0 hour drive, which can affect crew mobilization for work near Texas State Highway 71.

Places near Wyldwood

What boring work comes up near Hobbs Creek in Wyldwood?

  • Highway crossing: A conduit bore beneath Texas State Highway 71 needs a route and pits planned around the highway right of way.
  • Water service: A service run near Union Chapel Road starts with confirming the address provider and locating lines along the proposed path.
  • Creek crossing: A bore beneath Hobbs Creek needs a channel focused depth plan and a check for federal waterway jurisdiction.
  • Fiber route: A fiber conduit along Leisure Lane can use boring to pass beneath driveways without cutting their paved surface.
  • Drainage crossing: A route near Cottonwood Creek or its drainage needs suitable depth, entry pits and a check of marked utilities.
  • Sewer crossing: A pressurized sewer bore beneath Texas State Highway 21 needs the highway crossing cover specified in the TxDOT permit.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of boring near Union Chapel Road in Wyldwood?

Start with a map pin near Union Chapel Road or Hobbs Creek. The exact spot shows us which pavement, utilities or drainage the bore may meet. Include what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route, pit locations and access before building a scope for Wyldwood.

Ground is a leading cost factor in Wyldwood because Edge soil at the surface gives way to mapped clay and sandy clay loam below. The number of utilities to cross and expose, pavement or concrete, creek approaches and pit work also shape the plan near Union Chapel Road and Hobbs Creek. Pipe size, footage, sand backfill and excavator time matter too. The 418 road miles from Yukon affect mobilization, and high profile or emergency work can add demands to the scope.

Questions people ask about boring in Wyldwood

Does Trinity Boring Solutions take jobs in Wyldwood and Bastrop County, and who staffs them?

Yes. We take directional boring work in Wyldwood, including routes near Hobbs Creek. Our own crews handle the work, and partner drilling contractors we have vetted can support it from satellite yards. You work with Trinity from the first call through the bore log, whichever crew is at the site.

What ground should I expect for a Wyldwood bore through Edge soil?

The USDA soil survey maps Edge soil over 54 percent of Wyldwood. At about 40 inches below the surface, sandy clay loam is mapped under 45 percent and clay under 36 percent. That deeper clay can cling to tooling, so the drilling fluid and reaming plan should fit the site along Union Chapel Road.

Is rock likely on a Wyldwood bore, and how much bedrock is mapped?

Weathered bedrock is mapped within 60 inches on 15 percent of Wyldwood, while hard bedrock is not mapped within that depth. The Cenozoic Clayey Sand And Sandy Clay Decomposition Residuum includes clay and sand. Those maps help frame the plan, but a specific route near Hobbs Creek still needs site assessment.

Who approves a bore under Texas State Highway 71 in Wyldwood?

The line owner submits the utility permit through TxDOT’s online RULIS system, and TxDOT’s Austin District reviews it. We provide the bore plan and profile for the owner’s application. For a Texas State Highway 71 crossing, the permit sets the work conditions and required cover.

Can a line be bored under Hobbs Creek in Wyldwood?

A bore can be planned beneath Hobbs Creek, which runs 2.45 channel miles inside the mapped community. The route needs suitable depth under the channel, and the crossing is checked for federal waterway jurisdiction during planning. Site conditions and the utility route determine the final approach.

Which electric company owns a line at my Wyldwood address in Bastrop County?

Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative report electric service in Bastrop County. That list does not identify the owner at every Wyldwood address. Confirm the line owner and conduit specifications for the specific route near Union Chapel Road before planning the bore.

How far is Wyldwood from the Yukon office, and does being near Bastrop change the job?

Wyldwood is 418 road miles from our Yukon, Oklahoma main office, while Bastrop is 9.6 miles east of Wyldwood. The distance from Yukon can affect mobilization. Access, the route near Texas State Highway 71 and the ground at the bore site also shape the work plan.

How early should I call 811 for a Wyldwood bore along Union Chapel Road?

The person arranging the excavation calls Texas811 with the planned bore path, such as a route along Union Chapel Road. Texas law requires at least 48 hours’ notice, excluding Saturdays, Sundays and legal holidays, and the request cannot be made more than 14 days before excavation. If marks wear off or move, have them refreshed before work continues.

What affects the cost of a Wyldwood bore near Texas State Highway 71?

The job scope determines the price. In Wyldwood, mapped clay and Edge soil can affect drilling effort, while highway crossings, pavement, utilities to expose, creek or drainage work, pit size and pipe dimensions also matter. The 418 road miles from Yukon affect mobilization. A map pin and plans help define the route and work involved.

Where the Wyldwood facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wyldwood

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wyldwood, Texas

Type the address of your job in Wyldwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wyldwood

Same county: Elgin · Camp Swift · Smithville · Circle D-KC Estates · McDade · Paige · Red Rock · Rosanky. All counties: Texas county list.