trinityboringsolutions.com

Schertz Texas Directional Boring: Houston Black Clay, Interstate 35 and Cibolo Creek

Quick Answer: Can your line go under Cibolo Creek or Interstate 35 without cutting the surface? We take directional boring, also called horizontal directional drilling (HDD), jobs in Schertz, Texas, for crossings such as Cibolo Creek. From our Yukon, Oklahoma main office, Schertz is 462 road miles away, and Interstate 35 access shapes mobilization. Houston Black clay is common here; it can cling to a reamer, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Schertz bores at a glance

  • Incorporated city in Bexar County, Guadalupe County and Comal County, Texas. Population 44,428 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 462 miles, about 8.9 hours of driving.
  • Ground: Houston Black soil is mapped on 24 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: Interstate 35, Interstate 10, US 81, FM 1518 and FM 3009. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: Union Pacific, with 14 mapped street and rail crossings.
  • Named streams inside the boundary: Cibolo Creek, Womans Hollow Creek, Salitrillo Creek and Santa Clara Creek.
  • Public water: City of Schertz, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Cibolo Creek in Schertz?

Yes. In Schertz, across Bexar, Guadalupe and Comal counties, the Census Bureau Vintage 2024 estimate puts the population at 44,428. We bore water, sewer, gas, electric conduit and fiber routes beneath streets such as Schertz Parkway or near Cibolo Creek, keeping pavement and creek banks uncut where the bore path allows.

Our main office is in Yukon, Oklahoma, and Schertz work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982, after the family business started in 1965; those four decades of work matter where Houston Black clay can grip a reamer and swell around pipe.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Houston Black soil mean for a Schertz bore?

The USDA soil survey maps Houston Black soil across 24% of Schertz, with Heiden across 12% and Lewisville across 10%. Surface texture is clay across 34% and silty clay across 32%. At about 40 inches below the surface, clay accounts for 48% of mapped texture and silty clay for 20%; the mapped average clay content at that depth is 45%. Those figures describe mapped patterns, not test borings. Sticky clay can ball up on a reamer, while heavy clay can grip pipe as it is pulled through.

USDA soil survey, inside the Schertz city limitsWhat is mapped
Soil series mappedHouston Black 24 percent, Heiden 12 percent, Lewisville 10 percent, Austin 9 percent and Barbarosa 7 percent
Texture at the surfaceclay 34 percent, silty clay 32 percent and gravelly clay 14 percent
Texture about 40 inches downclay 48 percent, silty clay 20 percent and bedrock 19 percent
Engineering class about 40 inches downfat clay (CH) 56 percent, lean clay (CL) 19 percent and silty gravel (GM) 5 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel85 percent of the area

The USDA soil survey maps bedrock within 40 inches in 19% of Schertz, and weathered bedrock within 60 inches in 19%; hard bedrock is not mapped within 60 inches. No seasonal water table is mapped within 60 inches, while flood prone soils cover 6%. High steel corrosion risk is mapped across 85%, so the line owner should consider casing and tracer wire materials. The mapped units include Cenozoic alluvium and Late Cretaceous sedimentary deposits. Near Cibolo Creek, flood prone ground calls for a channel aware bore plan.

How do we drill Schertz clay without opening the street?

Houston Black clay can stay open, then stick to the reamer or tighten around the pipe. On a Schertz route near Cibolo Creek, we plan the fluid and reaming sequence around the mapped ground and nearby pavement.

  1. Houston Black clay can swell around pipe, so we use a thinner fluid mix and polymer, then ream in stages before pulling pipe through the Schertz ground.
  2. Where Schertz heavy clay borders pavement, we watch fluid returns closely and control pressure so drilling does not lift the road surface.
  3. At a Cibolo Creek crossing, we plan the bore below the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction.
  4. Before drilling near a marked line on Trainer Hale Road, we hydrovac pothole to expose it, then track the head and log depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What can a Schertz bore cross near Interstate 35?

Interstate 35 has 19.5 mapped roadway miles inside Schertz, with Interstate 10, US 81, FM 1518, FM 3009, FM 482, FM 78, FM 2252 and FM 1103 also within the limits. US 90 touches or runs along the boundary, and Loop 1604 is 0.1 miles away. Trainer Hale Road is the longest named street at 6.42 miles in the city; Lower Seguin Road runs 4.35 miles and Ware Seguin Road 3.93 miles. A bore plan needs the exact crossing point, not just the road name.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate19.5 roadway miles insideState highway office
Interstate 10Interstate0.1 roadway miles insideState highway office
US 81US highway4.1 roadway miles insideState highway office
FM 1518State highway8 roadway miles insideState highway office
FM 3009State highway6.2 roadway miles insideState highway office
FM 482State highway4.1 roadway miles insideState highway office
FM 78State highway3.3 roadway miles insideState highway office
FM 2252State highway1.3 roadway miles insideState highway office
FM 1103State highway0.8 roadway miles insideState highway office
US 90Highway nearbyRuns along or touches the city limitsState highway office
Loop 1604Highway nearby0.1 miles outsideState highway office
Texas State Highway 218Highway nearby0.5 miles outsideState highway office
Union PacificRailroad10.73 track miles insideThe railroad
Western Rail RoadRailroad nearby0.9 miles outsideThe railroad
Swipe the table sideways to see every column.

Union Pacific has 10.73 track miles inside Schertz, and public records map 14 street and rail crossings. A rail bore needs an agreement with the railroad that owns the track, with its terms guiding casing, depth and flagging. Cibolo Creek runs 17.26 channel miles inside the city, and 17 street crossings of named streams are mapped. No lakes or ponds are mapped within one mile. Creek work needs channel depth planning and a jurisdiction check during planning.

Who signs off on a Schertz bore near Union Pacific tracks?

Schertz is incorporated, so its city streets belong to the city; no city department or fee is assumed here. Work in the right of way of Interstate 35, FM 1518 or another state highway needs a TxDOT utility permit. For an electric or communication line, the cover depth is at least 60 inches at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it, while pressurized sewer needs 60 inches at crossings. The line owner applies through TxDOT RULIS in the TxDOT San Antonio District, using our bore plan and profile. A Union Pacific crossing also needs its railroad agreement. Cibolo Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground from City of Schertz in Schertz?

The City of Schertz public water system uses groundwater wells and serves 41,948 people through 16,265 service connections. That existing network matters when a new service follows Schertz Parkway or another established route. County electric service is reported by City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for a conduit bore before planning its route, since those providers are not each confirmed at every Schertz address.

Line ownerWhat it isSourceSize
City of SchertzPublic water systemGroundwater wells16,265 connections, 41,948 people served
City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bexar County, Guadalupe County and Comal CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Schertz’s median housing year at 2001; 5% of homes were built before 1960, 41% from 1960 to 1999 and 54% in 2000 or later. A replacement bore along Lower Seguin Road may follow older buried lines, while a newer service can add a route to more recent development. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows a line’s position, not its depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Schertz and Randolph AFB?

Schertz covers 33.13 square miles across Bexar, Guadalupe and Comal counties, at an elevation of 701 feet. ZIP codes include 78154, 78108 and 78132. Cibolo is 2.0 miles east, Randolph AFB is 2.8 miles southwest, Universal City is 3.5 miles west and Selma is 4.2 miles west. New Braunfels is 12.4 miles northeast, while San Antonio, the Bexar County seat, is 17.9 miles southwest. From our Yukon yard, the road distance is 462 miles and the drive is 8.9 hours, which affects mobilization for a Schertz job.

Places near Schertz

What kinds of bores come up along Trainer Hale Road in Schertz?

  • Highway crossing: An Interstate 35 bore keeps the line beneath the roadway, with the TxDOT permit and cover depth guiding the route.
  • Water service: A new connection near Schertz Parkway can run below pavement instead of cutting across the street.
  • Fiber route: A bore along Trainer Hale Road can carry conduit past driveways while keeping the surface intact.
  • Creek crossing: A Cibolo Creek bore needs a route beneath the channel and a jurisdiction check during planning.
  • Rail crossing: A bore beneath Union Pacific track needs the railroad agreement to set casing, depth and flagging.
  • Water replacement: A route near the City of Schertz groundwater system can bypass pavement while tying into an existing service.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Roy Richard Drive in Schertz?

Start with a map pin near Roy Richard Drive, because the exact spot shows whether the route approaches a street, a marked utility or a creek crossing. Tell us what goes underground, the pipe or conduit size and the footage. A sketch or plans help us see the entry and exit pits and the path between them.

The 462 road miles from Yukon set the mobilization context for a Schertz job. Houston Black clay can add reaming and fluid control work; a crossing of Interstate 35 or Union Pacific track brings added planning. Price also reflects bore length, pipe size, utilities to expose, pavement or concrete, creek crossings, pits, excavator time and sand backfill. High profile or emergency work can change the scope.

Questions people ask about boring in Schertz

Does Trinity take directional boring work in Schertz and Bexar County?

Yes. Trinity takes directional boring and horizontal directional drilling work in Schertz, including the part of the city in Bexar County. You coordinate with Trinity from the first call through the bore log, whether our own crews or a vetted partner contractor is on site. Cibolo Creek and Schertz Parkway are examples of local route features to identify.

Who maintains Ware Seguin Road in Schertz, and can a line go under it?

Ware Seguin Road is a city street because Schertz is incorporated. A directional bore can pass beneath the street without cutting its pavement when the route, access and ground allow. We still need the exact crossing location and marked utilities; a street name alone does not show what lies below the proposed path.

Are buried lines near Lower Seguin Road old enough to need replacement bores in Schertz?

Schertz housing has a median year built of 2001 in the American Community Survey 2019 to 2023 estimates. That mix can mean both replacement routes and new services near Lower Seguin Road. We plan around the actual line and expose each marked utility with hydrovac potholing before drilling close to it.

Does Houston Black soil in Schertz create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 85% of Schertz, including areas with Houston Black soil. The line owner selects coatings for steel casing or tracer wire. HDPE avoids that steel corrosion concern. The right choice depends on the line design and the owner’s specifications for the bore.

What ground will a bore encounter in Schertz Houston Black soil?

Houston Black soil covers 24% of Schertz in the USDA soil survey. About 40 inches down, clay is mapped across 48% of the area and silty clay across 20%. That clay can stick to the reamer and tighten around pipe, so staged reaming and a same day pull can help manage the open hole.

Will a Schertz bore hit rock, and how much bedrock is mapped?

Bedrock is mapped within 40 inches across 19% of Schertz, and weathered bedrock within 60 inches across 19%; hard bedrock is not mapped there within 60 inches. Those survey patterns do not rule out rock elsewhere along a route. The drilling setup depends on the ground actually encountered near Cibolo Creek or the proposed street crossing.

Can I reach Trinity after hours for an urgent bore near Ware Seguin Road in Schertz?

Yes. A person answers Trinity’s phone, (405) 409-7423, 24 hours a day, and the company provides emergency response. For a call about Ware Seguin Road, share the work location, what line is involved and what has happened so we can discuss the next steps.

How early do I need Texas811 marks for work on Trainer Hale Road in Schertz?

Count back at least two working days from the planned start on Trainer Hale Road; Texas law requires 48 hours, excluding Saturdays, Sundays and legal holidays. Request marks no earlier than 14 days before work. If the start moves more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed before work continues.

What affects the cost of a directional bore near Interstate 35 in Schertz?

The job scope sets the price, not just the footage. For an Interstate 35 route, length, pipe size, soil and rock, utilities to expose, pavement, creek crossings, pits and excavator time all matter. The 462 road miles from Yukon also affect mobilization. Emergency work or a high profile crossing can add planning needs.

Where the Schertz facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Schertz

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Schertz, Texas

Type the address of your job in Schertz. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page