trinityboringsolutions.com

Bellevue Texas Directional Boring: Bonti Soil, US 287 And BNSF Railway

Quick Answer: Bellevue is a small incorporated city in Clay County, where streets such as 4th Street belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for routes beneath streets and BNSF Railway. The Yukon main office is 179 road miles away, a mobilization detail for work beside US 287. USDA maps Bonti fine sandy loam across 42 percent of Bellevue, and nearby bedrock can make a bore slower and call for staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bellevue bores at a glance

  • Incorporated city in Clay County, Texas. Population 298 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 179 miles, about 3.4 hours of driving.
  • Ground: Bonti soil is mapped on 42 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 73 percent of the area.
  • Highways inside the boundary: US 287 and FM 1288. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Public water: City of Bellevue, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Bellevue’s 4th Street?

Bellevue is a small incorporated city in Clay County, with 298 residents in the Census Bureau Vintage 2024 estimate. We take water, sewer, gas, electric conduit and fiber work for routes along 4th Street, 6th Street or the US 287 corridor. The line and access determine whether a service run or a longer crossing fits the site.

Our main office is in Yukon, Oklahoma, and Bellevue work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for mapped Bonti fine sandy loam and weathered bedrock around Bellevue, rather than treat every route like open soil.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Bellevue’s Bonti soil survey show?

The USDA soil survey maps Bonti soil across 42 percent of Bellevue, with Stoneburg mapped across 28 percent and Renfrow across 27 percent. Surface texture is mostly loam at 55 percent, with fine sandy loam at 43 percent. At about 40 inches below the surface, the survey maps bedrock across 71 percent of the area and clay across 29 percent. The mapped clay averages 45 percent clay content. These are soil survey patterns, so the route still needs to be judged from its actual ground conditions.

USDA soil survey, inside the Bellevue city limitsWhat is mapped
Soil series mappedBonti 42 percent, Stoneburg 28 percent and Renfrow 27 percent
Texture at the surfaceloam 55 percent and fine sandy loam 43 percent
Texture about 40 inches downbedrock 71 percent and clay 29 percent
Engineering class about 40 inches downfat clay (CH) 29 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches73 percent of the area (0 percent hard rock, 73 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel29 percent of the area

The USDA survey maps bedrock within 40 inches across 73 percent of Bellevue, and weathered bedrock within 60 inches across 73 percent; hard bedrock is not mapped in that depth range. Weathered rock can slow the bit compared with soil. Seasonal water tables and flood prone soils are not mapped. High steel corrosion risk is mapped across 29 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that concern. The Permian Archer City Formation includes shale, sandstone, siltstone and conglomerate, which may affect ground conditions along a bore.

How is a bore run through Bellevue’s mapped bedrock?

Bellevue’s soil survey maps both fine sandy loam and shallow weathered bedrock. We choose the tooling and fluid plan for the actual route, then track the drill head and record depth and pitch as the bore advances.

  1. Where Bellevue’s mapped clay occurs near 40 inches, sticky cuttings can gather on the reamer, so we stage the reaming and plan the pullback for the same work period.
  2. The survey maps weathered bedrock within 60 inches across 73 percent of Bellevue; that rock can slow the bit, so we track depth and pitch as the bore advances.
  3. Along older parts of 4th Street, hydrovac potholing exposes each marked utility before the drill approaches; surface paint shows position, not burial depth.
  4. At a Bellevue crossing near BNSF Railway, we keep the surface intact and place pits in the dirt on each side of the planned bore.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Bellevue near BNSF Railway?

US 287 runs for 2.1 mapped roadway miles inside Bellevue, and FM 1288 for 0.7 miles. A bore in either highway’s right of way needs a TxDOT review, while a city street route has to account for the street itself. The longest named streets include 4th Street at 0.98 miles, 6th Street at 0.74 miles and Franklin Street at 0.69 miles. These mapped lengths help locate possible routes, but the bore plan still depends on the specific address and line path.

CrossingTypeMapped extentWho has a say
US 287US highway2.1 roadway miles insideState highway office
FM 1288State highway0.7 roadway miles insideState highway office
BNSF RailwayRailroad0.99 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 0.99 track miles inside Bellevue, on the BNSF Railway Wichita Falls Subdivision. Public mapping shows two street and rail crossings in the city, so a route near the tracks needs to account for railroad access and review. No named streams or lakes are mapped inside the limits; the city does have 0.2 miles of unnamed drainage. A drainage route needs site review to establish what the bore must pass beneath.

Who approves a Bellevue bore in Clay County?

Bellevue is incorporated, so 4th Street and other city streets belong to the city; a route in the US 287 or FM 1288 right of way goes through TxDOT. The utility owner, not our drilling crew, applies in RULIS, and the Wichita Falls District reviews it; we prepare the bore plan and profile for that filing. TxDOT cover rules set electric and communication lines at 60 inches at crossings and 48 inches along the right of way; water is 60 inches at crossings and 36 inches along it, while pressurized sewer is 60 inches at crossings. Highway crossings are bored or tunneled and encased, with rural bores extending under all travel lanes. BNSF Railway crossings need its agreement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Bellevue’s City of Bellevue water system?

The City of Bellevue public water system serves 289 people through 185 service connections and draws from groundwater wells. Electric utilities reporting service in Clay County are Oncor Electric Delivery Company, Texas-New Mexico Power and Wise Electric Cooperative. Those reports do not identify the provider at every Bellevue address, so we confirm the line owner before planning an electric conduit bore near the City of Bellevue water lines.

Line ownerWhat it isSourceSize
City of BellevuePublic water systemGroundwater wells185 connections, 289 people served
Oncor Electric Delivery Company, Texas-New Mexico Power and Wise Electric CooperativeElectric utilities reporting service in Clay CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Bellevue’s median housing year at 1955. The survey estimates 65 percent of homes were built before 1960, 19 percent from 1960 to 1999 and 16 percent in 2000 or later. Work along 6th Street may involve replacing an older service or adding a new one; age alone does not confirm what is underground. We use hydrovac potholing to expose marked lines before drilling near them, since locate paint does not show depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Bellevue from Ringgold and our Yukon office?

Bellevue is in Clay County, covers 0.84 square miles and sits at an elevation of 1,023 feet. Its ZIP code is 76228. Ringgold is 13.2 miles north, Bowie is 11.1 miles southeast, and Henrietta, the county seat, is 16.1 miles northwest. Bowie is also the nearest larger city, 11.1 miles southeast. From our Yukon, Oklahoma main office, Bellevue is 179 road miles away, about a 3.4 hour drive; that distance is part of planning a crew mobilization for work near US 287.

Places near Bellevue

Which jobs call for a bore along Bellevue’s 6th Street?

  • Highway crossing: A bore beneath US 287 follows a planned route under the travel lanes, with TxDOT review where the work enters highway right of way.
  • Water service: A connection near the City of Bellevue system needs a route matched to the groundwater supply line and the actual service location.
  • Fiber route: A conduit bore along 6th Street can carry fiber beneath the road surface while the marked utilities are exposed before drilling nearby.
  • Rail crossing: A route beneath BNSF Railway requires coordination around its 0.99 track miles inside Bellevue and the railroad’s crossing agreement.
  • Street replacement: A replacement line along 4th Street can pass beneath pavement rather than opening a trench across the street.
  • Drainage crossing: A bore near Bellevue’s mapped unnamed drainage needs a route planned around the channel and the conditions found at the site.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Bellevue bore near US 287?

For a quote on a bore near US 287, send the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help. A route that reaches BNSF Railway or crosses 4th Street needs a clear alignment so we can assess its crossings and access.

The job details set the scope: Bellevue’s mapped Bonti soil and shallow weathered bedrock affect ground work, while a BNSF Railway crossing or pavement along US 287 changes the crossing plan. We also account for line size and length, utilities to expose, concrete or pavement, drainage crossings, pits, excavator time and sand backfill. The 179 road miles from Yukon affect mobilization, and high profile or emergency work can add planning needs.

Questions people ask about boring in Bellevue

Does Trinity take directional boring jobs in Bellevue and Clay County?

Yes. We take work in Bellevue and across Clay County, with our own crews and partner drilling contractors from vetted satellite yards supporting the work. You coordinate with Trinity from the first call through the bore log, whichever crew is on site. A route near US 287 can be reviewed with its crossings and ground conditions in mind.

What do older homes near Bellevue’s 6th Street mean for replacement bores?

Bellevue’s American Community Survey 2019 to 2023 estimates put the median housing year at 1955, with 65 percent of homes built before 1960. That can mean a project is replacing an older service rather than adding a new one, but the buried line must be located and exposed. On 6th Street, hydrovac potholing helps confirm its position and depth before drilling nearby.

Does Bellevue’s Bonti soil create a corrosion concern for steel pipe?

The USDA survey maps high steel corrosion risk across 29 percent of Bellevue, including areas with Bonti soil. That is a consideration for steel casing and tracer wire, not a finding for every individual route. The line owner selects any coating or material choice; HDPE is not subject to that soil corrosion concern.

What ground does a bore pass through in Bellevue’s Bonti soil areas?

Bonti soil covers 42 percent of Bellevue in the USDA soil survey, with loam and fine sandy loam mapped at the surface. At about 40 inches, bedrock is mapped across 71 percent of the area and clay across 29 percent. Those patterns help guide planning, but they are not a substitute for checking the ground along a specific route.

Is rock mapped near the surface in Bellevue?

Yes. The USDA survey maps bedrock within 60 inches across 73 percent of Bellevue, and that mapped bedrock is weathered rather than hard. Weathered rock can take longer to drill through than soil. The survey does not map hard bedrock within 60 inches, but the route still needs to be planned for the conditions found on site.

Who approves a bore under Bellevue’s US 287?

For work in US 287 right of way, the utility owner submits the utility permit application through TxDOT’s RULIS system, and the Wichita Falls District reviews it. We provide the bore plan and profile for the owner’s application. The required cover depends on the line type and location, and TxDOT can set a different depth in the permit.

Can I call Trinity after hours about an urgent bore near Bellevue’s Franklin Street?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day. For an urgent job near Franklin Street, have the location and the line or conduit details ready so we can understand the requested work and its access needs.

How early should I request utility locates for a Bellevue bore along 4th Street?

The person arranging the bore along 4th Street requests locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the original notice, make a new request. Marks that wear off or move must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore in Bellevue near US 287?

The price depends on the job scope, including length, pipe or conduit size, ground, crossings and access. Bellevue’s mapped bedrock can change the drilling effort; pavement or a US 287 crossing can add permit and crossing planning. BNSF Railway, utilities to expose, pits, drainage, excavator time and the 179 road miles from Yukon can also affect the work.

Where the Bellevue facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bellevue

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bellevue, Texas

Type the address of your job in Bellevue. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bellevue

Same county: Petrolia · Dean · Byers · Jolly. All counties: Texas county list.