trinityboringsolutions.com

Highland Park Texas Directional Boring: Silty Clay, Austin Chalk and Turtle Creek

Quick Answer: Can we put a line beneath US 75 or across Turtle Creek without cutting the surface? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Highland Park, Texas, for routes where a surface crossing needs to stay intact. Highland Park is 218 road miles from our Yukon, Oklahoma, main office, and Mockingbird Lane is one local route to plan around. Austin soil is clay rich, so sticky cuttings and swelling ground can affect the reamer and pipe pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Highland Park bores at a glance

  • Incorporated city in Dallas County, Texas. Population 8,762 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 218 miles, about 4.3 hours of driving.
  • Ground: Austin soil is mapped on 33 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 52 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: US 75, US 77 and Interstate 35.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Turtle Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 75 in Highland Park?

We take directional boring work in Highland Park, in Dallas County, where the Census Bureau Vintage 2024 estimate puts the population at 8,762. For a route along Beverly Drive or Mockingbird Lane, we install water, sewer, gas, electric conduit and fiber lines by choosing a bore path around the street and the utilities already there.

Our main office is in Yukon, Oklahoma, and Highland Park work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982. Along Mockingbird Lane, our record of no utility strike in over 25 years is not a substitute for locating lines, including checking whether a marked line belongs to Oncor Electric Delivery Company, which reports service in Dallas County.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Austin soil bring to Highland Park bores?

The USDA soil survey maps Austin soil across 33 percent of Highland Park, Houston Black across 24 percent, and Dalco across 20 percent, with Lewisville also mapped across 15 percent. At about 40 inches below the surface, the survey maps bedrock in 52 percent of the area, clay in 25 percent and silty clay in 15 percent; the CH classification covers 43 percent. No sandy area is mapped at that depth. These mapped patterns help plan a bore near Beverly Drive, but they are not a substitute for checking the ground on site.

USDA soil survey, inside the Highland Park city limitsWhat is mapped
Soil series mappedAustin 33 percent, Houston Black 24 percent, Dalco 20 percent, Lewisville 15 percent and Urban land (miscellaneous area) 3 percent
Texture at the surfacesilty clay 51 percent, clay 43 percent and variable 3 percent
Texture about 40 inches downbedrock 52 percent, clay 25 percent and silty clay 15 percent
Engineering class about 40 inches downfat clay (CH) 43 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches52 percent of the area (0 percent hard rock, 52 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel96 percent of the area
Mapped as urban land (disturbed fill)3 percent of the area

The USDA soil survey maps bedrock within five feet across 52 percent of Highland Park, all weathered rather than hard, with a typical depth of 35 inches. A bore near Armstrong Parkway may meet a soil to rock contact, where steering needs care. Seasonal water table is not mapped within five feet, while flood prone soils cover 3 percent, so a Turtle Creek crossing still needs channel planning. Silty Clay Decomposition Residuum, a Cenozoic unit, can swell when wet and crack when dry; Austin Chalk is also mapped and dates to the Late Cretaceous. For steel casing or tracer wire near Beverly Drive, the line owner chooses coatings where high steel corrosion risk is mapped across 96 percent of the area.

How do we drill through Highland Park bedrock and clay?

Austin and Houston Black soils make clay the main ground concern in Highland Park. We set the bore plan around the mapped weathered bedrock and the route, then track the drill head as it advances beneath streets such as Beverly Drive.

  1. In Austin and Houston Black soils, we use a measured fluid mix and ream in stages so sticky clay does not ball up on the reamer near Beverly Drive.
  2. Where Highland Park’s heavy clay is on the route, we watch fluid returns and keep pressure controlled to reduce the chance of lifting pavement on Mockingbird Lane.
  3. If a bore near Armstrong Parkway meets the mapped weathered bedrock, we slow the advance and check steering at the soil to rock contact.
  4. For a Turtle Creek crossing, we plan below the channel, expose marked utilities by hydrovac, and track depth and pitch from the surface.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross in Highland Park near Dallas Area Rapid Transit (DART)?

No US or state highway is listed inside Highland Park, but US 75 runs along or touches the town limits. US 77 and Interstate 35 are each 1.4 miles outside the limits. That can make a crossing near US 75 a different permit and work area from a bore on a town street. Beverly Drive runs 2.18 miles in town, Mockingbird Lane 2.21 miles, and Saint Johns Drive 1.88 miles, giving a crew several named routes where pavement and buried lines may shape the bore path.

CrossingTypeMapped extentWho has a say
US 75Highway nearbyRuns along or touches the city limitsState highway office
US 77Highway nearby1.4 miles outsideState highway office
Interstate 35Highway nearby1.4 miles outsideState highway office
Loop 12Highway nearby1.5 miles outsideState highway office
Dallas Area Rapid Transit (DART)Railroad nearby0.3 miles outsideThe railroad
Turtle CreekStream1.88 channel miles insideChecked for Corps of Engineers jurisdiction
Cedar BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Turner Pk ReservoirLake or pond3 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad runs inside Highland Park, and no mapped street and rail crossing is inside the limits. Dallas Area Rapid Transit (DART) track is 0.3 miles outside the town, so a project that reaches it needs track ownership and crossing details checked. Turtle Creek runs 1.88 channel miles in town and has six mapped street crossings; a planned creek bore needs a depth plan and a check for U.S. Army Corps of Engineers jurisdiction. Cedar Branch is 0.9 miles outside the limits, and Turner Pk Reservoir is a nearby three acre water feature outside town.

Whose permission does a Highland Park bore need in Dallas County?

As an incorporated town, Highland Park controls its streets, so work on Beverly Drive is separate from work in the US 75 right of way. A utility crossing US 75 needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules set cover by line type, including 60 inches for electric or communication lines and water lines at highway crossings. A crossing of DART track needs an agreement from the railroad that owns it, while a Turtle Creek crossing is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Highland Park and Dallas County?

Before planning a bore near Beverly Drive, the water provider for that specific address has to be confirmed with Highland Park, Dallas County or the local water district. Utilities reporting electric service in Dallas County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative. Those records do not identify the electric owner at every Highland Park address, so we confirm the line owner before a conduit bore. Near Mockingbird Lane, hydrovac potholing lets us expose marked water and electric lines before drilling close to them.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Dallas CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Highland Park’s median housing year at 1973; 43 percent of housing was built before 1960, 33 percent from 1960 to 1999, and 24 percent in 2000 or later. A replacement bore near Beverly Drive may meet older buried lines, while a new service along Armstrong Parkway still needs its route checked. We pothole each marked utility on the bore path before drilling near it, because paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Highland Park from University Park and our Yukon yard?

Highland Park is in Dallas County, covers 2.24 square miles and sits at elevation 511 feet. Its ZIP codes are 75205, 75209 and 75219. University Park is 1.3 miles north and is the nearest larger city; Dallas, the county seat, is 3.3 miles southeast. Farmers Branch is 8.0 miles northwest, Cockrell Hill is 8.2 miles southwest, and Addison is 9.4 miles north. From our Yukon yard, the road trip to Highland Park is 218 miles and 4.3 hours, which affects how we plan crew and equipment mobilization for a job near US 75.

Places near Highland Park

What would we bore near Turtle Creek in Highland Park?

  • Highway crossing: A route near US 75 needs a bore plan that accounts for the TxDOT right of way and the line owner’s permit.
  • Water service: A service along Beverly Drive needs the address water provider confirmed before we plan the tie in and bore path.
  • Fiber conduit: A conduit route near Mockingbird Lane needs marked utilities exposed before the drill approaches them.
  • Creek crossing: A Turtle Creek bore needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: Work reaching Dallas Area Rapid Transit (DART) track needs an agreement from the railroad that owns the track.
  • Replacement bore: Near Armstrong Parkway, a replacement route can avoid opening pavement while old and new utility lines are checked.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Highland Park quote near Armstrong Parkway?

For an Armstrong Parkway quote, send the street address or map pin, what will go underground, the pipe or conduit size, and the footage; a sketch or plans help. Include whether the route reaches a street, utility crossing or creek, since those details can change the bore layout near Highland Parkway and Turtle Creek.

The scope sets the price: Austin soil and weathered bedrock affect drilling and reaming, while the pipe size and bore length set equipment needs. Crossings matter too; a route near US 75, DART track or Turtle Creek may require different planning and exposure work. Pavement, pits, excavator time and sand backfill also change the job. Highland Park is 218 road miles from Yukon, so mobilization is part of the logistics, along with any high profile or emergency schedule.

Questions people ask about boring in Highland Park

Does Trinity Boring Solutions take directional boring jobs in Highland Park and Dallas County?

Yes. We take work in Highland Park and staff it with our own crews or crews from vetted partner drilling contractors. You deal with Trinity from the first call through the bore log, including on a job along Mockingbird Lane. We serve Oklahoma and Texas and take work across Texas.

How old are Highland Park lines near Beverly Drive, and can a replacement bore avoid them?

The American Community Survey 2019 to 2023 five year estimates put Highland Park’s median housing year at 1973, with 43 percent of homes built before 1960. A bore near Beverly Drive can provide a route for replacement work without opening the whole street, but marked utilities still need exposure before drilling near them.

Does Austin soil in Highland Park corrode steel, and what pipe should I use?

High steel corrosion risk is mapped across 96 percent of Highland Park, so the line owner should weigh coatings for steel casing or tracer wire on an Austin soil route. HDPE is not affected by this soil corrosion concern. The owner and project requirements determine which material fits the line.

What ground should I expect in Highland Park Austin soil?

Austin soil covers 33 percent of Highland Park, and the USDA soil survey maps clay in 25 percent of the area at about 40 inches below the surface. Silty clay is mapped there too, while no sandy area is mapped at that depth. Sticky cuttings and swelling clay can affect reaming and pipe pull near Beverly Drive.

Will a Highland Park bore hit bedrock?

Bedrock is mapped within five feet across 52 percent of Highland Park, with a typical depth of 35 inches. The mapped bedrock in that depth range is weathered, not hard. A route near Armstrong Parkway may meet rock sooner than a dirt only bore, so the soil to rock transition needs careful steering.

Who approves a Highland Park bore under US 75?

A bore in the US 75 right of way needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The utility that owns the line files the application in TxDOT’s online RULIS system, and we supply the bore plan and profile for that filing. The permit sets the work requirements for the crossing.

What bore sizes and lengths can you handle near Highland Park’s Armstrong Parkway?

For a job near Armstrong Parkway, our equipment range covers 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, line size and ground conditions help determine which setup fits. We can review a sketch or plans with the job details.

How much notice does Texas811 need for a Highland Park bore near Mockingbird Lane?

Before excavation near Mockingbird Lane, Texas811 requires a locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring in Highland Park near US 75?

The job scope sets the price. Length, pipe size, Austin soil and weathered bedrock all affect the work, as do utilities to expose, pavement, pits and creek crossings. A route near US 75 may add permit planning, and Highland Park’s 218 road miles from Yukon affect mobilization. Emergency timing can also change the plan.

Where the Highland Park facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Highland Park

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Highland Park, Texas

Type the address of your job in Highland Park. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Highland Park

Same county: Irving · Garland · Mesquite · Grand Prairie · Richardson · Rowlett · DeSoto · Carrollton · Cedar Hill · Lancaster · Coppell · Duncanville. All counties: Texas county list.