trinityboringsolutions.com

Wilmer Texas Directional Boring: Houston Black Clay, Ten Mile Creek, Union Pacific

Quick Answer: The City of Wilmer water system uses purchased surface water, while electric service is reported by several utilities in Dallas County, so we confirm the line owner before a conduit bore. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Wilmer, including routes that cross Interstate 45. The Yukon main office is 235 road miles away, a factor for work along Pleasant Run Road. Houston Black clay makes up 27% of mapped soil units, so sticky cuttings and fluid returns shape the reaming plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wilmer bores at a glance

  • Incorporated city in Dallas County, Texas. Population 6,774 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 235 miles, about 4.7 hours of driving.
  • Ground: Houston Black soil is mapped on 35 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 8 percent of the area.
  • Highways inside the boundary: Interstate 45. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific, with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Ten Mile Creek, Cottonwood Creek and Trinity River.
  • Public water: City of Wilmer, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Ten Mile Creek in Wilmer?

The Census Bureau Vintage 2024 estimate puts Wilmer at 6,774 residents in Dallas County. Along Pleasant Run Road and Belt Line Road, we install water, sewer, gas, electric conduit and fiber where a service extension or replacement needs to reach a property or connect with an existing route. We locate and expose crossings before the drill gets close.

Our main office is in Yukon, Oklahoma, and Wilmer work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a roughly 4,100 foot, 48 inch casing bore under the Arkansas River in Tulsa; beside that scale, a Wilmer job might be a service line routed around Goode Road access. The family business began in 1965 and has drilled directionally since 1982, with no utility strike in over 25 years.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Houston Black soil like to bore in Wilmer?

The USDA soil survey maps Houston Black series across 35% of Wilmer and Branyon across 29%, showing how widely these clay soils are represented. At about 40 inches below the surface, clay texture covers 78% of mapped area and average clay content is 52%. The survey maps 88% of the area as heavy clay at that depth and only 1% as sandy. Sticky clay can hold a bore open but build up on a reamer, so staged cutting and fluid control matter.

USDA soil survey, inside the Wilmer city limitsWhat is mapped
Soil series mappedHouston Black 35 percent, Branyon 29 percent, Trinity 6 percent, Heiden 4 percent and Lewisville 4 percent
Texture at the surfaceclay 78 percent, silty clay 12 percent and variable 3 percent
Texture about 40 inches downclay 78 percent, silty clay 10 percent and bedrock 4 percent
Engineering class about 40 inches downfat clay (CH) 86 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down52 percent
Bedrock mapped within 60 inches8 percent of the area (0 percent hard rock, 8 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel94 percent of the area

The USDA soil survey maps bedrock within 60 inches in 8% of Wilmer, with typical bedrock depth listed at 31 inches; that calls for checking conditions rather than assuming a uniform drilling layer. Seasonal water table is mapped within 60 inches in 2%, while flood prone soils cover 11%. High steel corrosion risk is mapped across 94%, so the line owner should consider protection for steel casing and tracer wire. The Ozan Formation, a Late Cretaceous claystone unit, is also mapped here and may add variable clay, silt and sand content.

How do crews bore through Wilmer clay?

Houston Black and Branyon clay call for controlled fluid and staged reaming. On a route near Wilmer streets or drainage, we plan the bore around the mapped ground and expose marked utilities before drilling close to them.

  1. Houston Black soil is sticky and can gather on the reamer, so we use a controlled fluid mix and open the bore in stages before pulling pipe.
  2. With heavy clay mapped across 88% of the area at about 40 inches, we watch fluid returns near Pleasant Run Road to avoid lifting pavement.
  3. Where a Wilmer route meets a creek or flood prone soil, we plan depth below the channel and check the crossing for federal jurisdiction.
  4. Before drilling near Belt Line Road, we hydrovac pothole marked utilities; a walkover locator tracks the drill head while we log depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross in Wilmer near Union Pacific?

Interstate 45 runs for 6.1 mapped roadway miles inside Wilmer, and Interstate 45 Business touches the city limits, so a right of way route can bring TxDOT into the plan. Pleasant Run Road spans 4.0 miles in the city, Belt Line Road 3.97, and Goode Road 2.92. These corridors include road edges and driveways to account for. Boring can leave pavement and access surfaces uncut when entry and exit pits can sit in the dirt beyond them.

CrossingTypeMapped extentWho has a say
Interstate 45Interstate6.1 roadway miles insideState highway office
Interstate 45 BusinessHighway nearbyRuns along or touches the city limitsState highway office
Union PacificRailroad10.12 track miles insideThe railroad
Ten Mile CreekStream9.01 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream8.97 channel miles insideChecked for Corps of Engineers jurisdiction
Trinity RiverStream4.28 channel miles insideChecked for Corps of Engineers jurisdiction
Gravel SloughStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Old Tenmile CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Parsons SloughStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Hunt Fish Club LakeLake or pond169 acres, nearbyChecked for Corps of Engineers jurisdiction
Lancaster Club LakeLake or pond94 acres, nearbyChecked for Corps of Engineers jurisdiction
Heath LakeLake or pond27 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific tracks extend 10.12 miles through Wilmer, and 9 mapped street and rail crossings make track location a route planning concern. A crossing needs an agreement from the railroad that owns the track, with casing, depth and flagging set by that agreement. Ten Mile Creek runs 9.01 channel miles in the city, and the mapped streets cross named streams 21 times. Creek planning includes checking whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Do I need a permit to bore in Wilmer, Dallas County?

Wilmer is incorporated, so its city streets, including Goode Road, belong to the city itself. Interstate 45 is a TxDOT route; work in its right of way needs a utility permit reviewed by the TxDOT Dallas District. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system, and we prepare the bore plan and profile for work under that permit. A crossing of Union Pacific track also needs an agreement from the railroad that owns it. For Ten Mile Creek, crossing plans are checked for federal water jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Wilmer near the City of Wilmer system?

The City of Wilmer public water system uses purchased surface water and reports 2,724 service connections serving 7,296 people. That system matters when a new water route or replacement needs to connect along a Wilmer street. Utilities reporting electric service in Dallas County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative. We confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of WilmerPublic water systemSurface water bought from another system2,724 connections, 7,296 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Dallas CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Wilmer’s median housing year at 2007, with 12% of homes built before 1960 and 61% built in 2000 or later. Housing age does not establish the age of a buried line, but it can help frame whether a Belt Line Road project serves a newer connection or replaces older pipe. We hydrovac pothole marked utilities on the planned path because paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Wilmer and nearby Hutchins?

Wilmer is an incorporated city in Dallas County, at an elevation of 438 feet and covering 12.14 square miles. The city’s ZIP codes are 75172 and 75146. Hutchins is 3.5 miles northwest, Ferris is 4.3 miles south, and Lancaster is 5.4 miles west; Lancaster is also the nearest larger city. Dallas, the county seat, is 14.3 miles north. From our Yukon main office, the trip is 235 road miles and 4.7 drive hours, which is part of planning mobilization for a Wilmer project.

Places near Wilmer

Which jobs call for a bore along Pleasant Run Road in Wilmer?

  • Highway crossing: An Interstate 45 route can pass beneath pavement by bore, with the right of way and utility permit included in planning.
  • Water service: A connection near Belt Line Road can tie into the City of Wilmer system without open cutting the street.
  • Fiber conduit: Along Pleasant Run Road, a bore can carry conduit while keeping driveways and pavement intact.
  • Creek crossing: A route near Cottonwood Creek needs a planned depth below the channel and a check for federal water jurisdiction.
  • Street replacement: A sewer or water replacement near Goode Road can use potholes to confirm marked crossings before drilling.
  • Drainage crossing: Where a route meets Trinity River, plan the bore around the channel and leave creek banks uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a directional boring quote for Millers Ferry Road in Wilmer?

For a Millers Ferry Road request, start with the address or map pin so we can place the route. Tell us what goes in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show driveways, crossings and pit locations in Wilmer.

A straightforward route through Houston Black clay with few crossings and dirt pit access is simpler to plan than one beneath Interstate 45 or Union Pacific track. Price depends on length, pipe or conduit size, soil and rock, utilities to expose, pavement, creek crossings, pits, excavator time and backfill. A route near Ten Mile Creek may add crossing planning, while mobilization also reflects the 235 road miles from Yukon.

Questions people ask about boring in Wilmer

Does Trinity Boring Solutions take directional boring work in Wilmer and Dallas County?

Yes. We take directional boring work in Wilmer, and the project is managed through Trinity whether our own crew or a vetted partner contractor is on site. Our main office is in Yukon, Oklahoma, and the work is staffed through our crews and partner drilling contractors. We stay involved from the first call through the bore log.

Can a line be bored under Ten Mile Creek in Wilmer?

A bore may be planned beneath Ten Mile Creek, subject to the route and site conditions. The creek runs 9.01 channel miles in Wilmer, so depth and bank access are part of the plan. During planning, we check whether the proposed water crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who runs Wilmer’s public water system, and where does the water come from?

The City of Wilmer owns and runs the public water system, which uses purchased surface water. It reports 2,724 service connections and serves 7,296 people. Those details help identify the system a proposed water line may connect to, but the specific route near a Wilmer street still needs to be confirmed.

Which electric utility serves Wilmer in Dallas County, and who confirms conduit requirements?

Several utilities report electric service in Dallas County, so no single provider should be assumed for every Wilmer address. The reporting utilities include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative. Confirm the line owner and conduit specifications before planning a bore.

Who is responsible for Goode Road in Wilmer, and can a bore avoid cutting it?

Wilmer is incorporated, so city streets such as Goode Road belong to the city itself. Directional boring can install a line below the road without cutting its pavement when the route, depth and pit locations work for the site. Any marked utilities along the path need to be exposed before the drill approaches them.

What does Wilmer housing age near Belt Line Road mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates give Wilmer a median housing year of 2007; 12% of homes were built before 1960 and 61% in 2000 or later. Those figures do not date buried lines, but they help distinguish a possible replacement project from a newer service extension near Belt Line Road.

Can I call Trinity after hours about an urgent bore near Goode Road in Wilmer?

Yes. A person answers our phone at (405) 409-7423 24 hours a day, and we offer 24 hour emergency response. If an urgent job is near Goode Road, have the location and the line involved ready so we can discuss the route, access and what needs to be exposed.

How much notice does Texas811 need for a Wilmer bore near Pleasant Run Road?

For a bore near Pleasant Run Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If the start moves more than 14 days past the original notice, request a new notice. Refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore near Interstate 45 in Wilmer?

The job details set the price, including bore length, pipe or conduit size, Houston Black clay, utilities to expose, pavement, pits and backfill. A crossing near Interstate 45 or Union Pacific track can add planning and access needs. Creek crossings and mobilization from the Yukon office also affect the scope.

Where the Wilmer facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wilmer

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wilmer, Texas

Type the address of your job in Wilmer. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wilmer

Same county: Dallas · Irving · Garland · Mesquite · Grand Prairie · Richardson · Rowlett · DeSoto · Carrollton · Cedar Hill · Coppell · Duncanville. All counties: Texas county list.