trinityboringsolutions.com

Caldwell Texas Directional Boring: Benchley Soil, Davidson Creek And BNSF Railway

Quick Answer: Along Davidson Creek and the BNSF Railway, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Caldwell, Texas. From our Yukon, Oklahoma main office, Caldwell is 380 road miles away; our own crews and vetted partner contractor satellite yards staff the work. Benchley soil covers 40% of the mapped area, and clay at about 40 inches can grip pipe, so we plan staged reaming and a timely pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Caldwell bores at a glance

  • County seat of Burleson County, Texas. Population 4,820 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 380 miles, about 7.4 hours of driving.
  • Ground: Benchley soil is mapped on 40 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 5 percent of the area.
  • Highways inside the boundary: Texas State Highway 21, Texas State Highway 36, FM 975, Texas State Highway 83 and FM 166. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: BNSF Railway and Union Pacific, with 15 mapped street and rail crossings.
  • Named streams inside the boundary: Davidson Creek and Elm Branch.
  • Public water: City of Caldwell, groundwater wells.
  • Electric: City of Caldwell municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Caldwell, Burleson County?

From our Yukon, Oklahoma yard, Caldwell is 380 road miles away, and our own crews and partner contractor satellite yards staff jobs in Burleson County. The Census Bureau Vintage 2024 estimate puts Caldwell at 4,820 people. Along Texas State Highway 21, Gray Street or Banks Street, we can bore routes for water, sewer, gas, electric conduit or fiber without opening the full street.

Our main office is in Yukon, Oklahoma, and Caldwell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began as a family business in 1965 and have drilled directionally since 1982. Our range runs from 3/4 inch service lines to 48 inch casing, for work from a Banks Street connection to a crossing near Davidson Creek.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does Benchley soil mean for a bore in Caldwell?

The USDA soil survey maps Benchley soil across 40% of Caldwell, the most common named soil series. Benchley loam with 1 to 3 percent slopes covers 29% of the mapped area, and Benchley loam with 3 to 5 percent slopes covers 11%. About 40 inches down, clay is mapped across 84% of the area, with an average clay content of 41%. Heavy clay at that depth is mapped across 86%. These are mapped soil patterns, not test boring results. In clay, the reamer can pick up sticky material, and the ground can grip the pipe.

USDA soil survey, inside the Caldwell city limitsWhat is mapped
Soil series mappedBenchley 40 percent, Davilla 22 percent, Luling 9 percent, Sandow 7 percent and Spiller 5 percent
Texture at the surfaceloam 76 percent, fine sandy loam 10 percent and clay 9 percent
Texture about 40 inches downclay 84 percent, stratified loamy sand to clay loam 7 percent and sandy clay loam 6 percent
Engineering class about 40 inches downfat clay (CH) 56 percent and lean clay (CL) 42 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches5 percent of the area (0 percent hard rock, 5 percent weathered rock)
Seasonal water table within 60 inches12 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel90 percent of the area

The USDA soil survey maps bedrock within 60 inches across 5% of Caldwell, and that mapped bedrock is weathered; hard bedrock is not mapped within that depth. Seasonal water tables occur within 60 inches across 12% of the area, so pits may need pumping. Flood prone soils cover 8%, which matters near Davidson Creek. High steel corrosion risk is mapped across 90%, so the line owner should consider casing and tracer wire materials. The geologic map includes Cook Mountain Formation of Bartonian age and Limonitic Sandy Decomposition Residuum of Cenozoic age, with clay, sand and shale that can change drilling conditions.

How do we drill Caldwell’s clay ground?

Benchley soil and the clay mapped about 40 inches down call for a controlled reaming plan. Along Davidson Creek or a Caldwell street, we keep the bore tracked and watch returns near pavement.

  1. We use thinner drilling fluid and polymer in Caldwell clay, then ream in stages so sticky cuttings do not build up on the tool.
  2. Where heavy clay lies under Texas State Highway 21, we watch fluid returns and keep pressure controlled to protect pavement.
  3. Near Davidson Creek, we plan the bore below the channel and allow for wet pits where seasonal water tables are mapped.
  4. Before a bore near Gray Street, we hydrovac expose each marked utility on the path; then we track and log the drill head’s depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What could a new line cross in Caldwell near Davidson Creek?

Texas State Highway 21 has 3.9 mapped roadway miles inside Caldwell, and Texas State Highway 36 has 2.0. FM 975, Texas State Highway 83 and FM 166 also pass through the city. Presidential Corridor is the longest named street at 3.9 miles. Old San Antonio Road runs 1.45 miles, and Gray Street runs 1.4 miles. Those routes give a bore several possible pavement and utility interfaces, so the path and access points matter before we set pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 21State highway3.9 roadway miles insideState highway office
Texas State Highway 36State highway2 roadway miles insideState highway office
FM 975State highway1.2 roadway miles insideState highway office
Texas State Highway 83State highway0.5 roadway miles insideState highway office
FM 166State highway0.3 roadway miles insideState highway office
BNSF RailwayRailroad4.14 track miles insideThe railroad
Union PacificRailroad2.65 track miles insideThe railroad
Davidson CreekStream2.51 channel miles insideChecked for Corps of Engineers jurisdiction
Elm BranchStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 4.14 track miles in Caldwell, and Union Pacific has 2.65. Public maps show 15 street and rail crossings in the city, so a route near either railroad needs careful alignment. Davidson Creek runs 2.51 channel miles and Elm Branch runs 1.1; five mapped street crossings intersect named streams. We plan creek work below the channel and check for U.S. Army Corps of Engineers jurisdiction. Since no lakes or ponds are mapped within one mile of Caldwell, we can assess boring routes using the mapped water information.

Who approves a Caldwell bore near BNSF Railway?

For work in the right of way of Texas State Highway 21, Texas State Highway 36, FM 975, Texas State Highway 83 or FM 166, TxDOT utility permission is needed. The TxDOT Bryan District reviews the application, which the line owning utility files through RULIS; we prepare the bore plan and profile and work under the utility owner’s permit. A crossing of BNSF Railway or Union Pacific needs an agreement from the railroad that owns the track, with its conditions for casing, depth and flagging. A Davidson Creek crossing is checked for Corps jurisdiction during planning. Since Caldwell is incorporated, we coordinate street work with the city that owns Caldwell’s streets.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be buried near the City of Caldwell system?

The City of Caldwell public water system uses groundwater wells and reports 2,649 service connections serving 4,358 people. A bore near those water lines needs the route checked before drilling. Caldwell also owns its municipal electric system, which reports 2,206 customers. We confirm which line owner applies to the proposed route before planning an electric conduit bore near Banks Street or Texas State Highway 21.

Line ownerWhat it isSourceSize
City of CaldwellPublic water systemGroundwater wells2,649 connections, 4,358 people served
City of Caldwell municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration2,206 customers reported
Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric CooperativeElectric utilities reporting service in Burleson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Caldwell’s 1990 median housing year in the American Community Survey 2019 to 2023 five year estimates is context, while we assess each underground route directly. The survey estimates 15% of homes were built before 1960, 52% from 1960 to 1999 and 33% in 2000 or later. Along older streets such as Old San Antonio Road, a replacement bore may follow an existing service route; newer areas may need a new connection. We hydrovac pothole every marked utility on the bore path before drilling near it, because paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where does Trinity cover around Caldwell and Deanville?

Caldwell is the county seat of Burleson County, at an elevation of 402 feet and within 4.28 square miles of land. Its ZIP code is 77836. Deanville is 7.8 miles southwest, and Cade Lakes is 4.5 miles west. Bryan, the nearest larger city, is 21.2 miles northeast. From our Yukon, Oklahoma main office, the drive to Caldwell is 380 road miles and 7.4 hours. That distance is part of planning mobilization for work near Deanville or along Texas State Highway 21.

Places near Caldwell

What could we bore in Caldwell near Gray Street?

  • Highway crossing: A bore under Texas State Highway 21 can pass beneath travel lanes without cutting the pavement, subject to the TxDOT permit plan.
  • Water service: A connection near the City of Caldwell system can be routed around marked water lines with potholing before the drill approaches.
  • Creek crossing: A Davidson Creek bore can stay beneath the channel while the route and Corps jurisdiction are checked during planning.
  • Rail crossing: A route crossing BNSF Railway or Union Pacific needs an agreement with the railroad that owns the track.
  • Street replacement: A bore along Old San Antonio Road can replace a buried service without opening the full street surface.
  • Fiber route: A conduit run near Presidential Corridor can use pits at either end and avoid cutting the street between them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Caldwell bore near Banks Street?

Send an address or map pin first. The exact spot matters near Banks Street because a route toward Davidson Creek or a marked utility can change where the pits fit. For boring on Caldwell’s city streets, tell us what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route before discussing the bore.

The mapped clay near Benchley soil is the first price factor because it can cling to the reamer and pipe, calling for staged passes. The next questions are what the route crosses, such as BNSF Railway track or Davidson Creek, and whether pavement needs to stay intact. Pipe size and length, marked utilities to expose, pit and excavator needs, backfill, and emergency or high profile work also affect the scope. Mobilization matters because Caldwell is 380 road miles from our Yukon yard.

Questions people ask about boring in Caldwell

Does Trinity take directional boring jobs in Caldwell, Burleson County?

Yes. Trinity takes directional boring work in Caldwell, and the job is staffed by our own crews or from satellite yards run by partner drilling contractors we have vetted. We remain your contact from the first call through the bore log, including a route near Texas State Highway 21 or Davidson Creek.

How old are buried lines near Caldwell’s Old San Antonio Road, and can they be replaced by boring?

The American Community Survey 2019 to 2023 five year estimates put Caldwell’s median housing year at 1990, with 15% of homes built before 1960. That does not date a particular buried line. A replacement bore along Old San Antonio Road can avoid opening the whole street, but we expose marked utilities first to confirm their actual positions.

Can groundwater or flooding affect Caldwell bore pits near Davidson Creek?

It can. The USDA soil survey maps seasonal water tables within 60 inches across 12% of Caldwell and flood prone soils across 8%. Near Davidson Creek, we account for wet pits and plan the crossing beneath the channel. The creek crossing is also checked for U.S. Army Corps of Engineers jurisdiction during planning.

Does Benchley soil in Caldwell corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 90% of Caldwell, so the line owner should consider the casing and tracer wire materials. Benchley soil is common here, but the soil map is not a site specific test. HDPE can be considered for the line, and the owner selects any coating for steel components.

What ground does a bore go through in Caldwell’s Benchley soil?

Benchley is the most common named soil series, mapped across 40% of Caldwell. The USDA soil survey maps clay across 84% of the area at about 40 inches, with an average clay content of 41%. That sticky ground can cling to the reamer and grip pipe, so we plan staged reaming and a timely pull.

Is there rock under Caldwell, and how much bedrock is mapped within five feet?

The USDA soil survey maps bedrock within 60 inches across 5% of Caldwell, and the mapped bedrock is weathered; hard bedrock is not mapped within that depth. That does not establish conditions at a specific bore. The geologic map includes Cook Mountain Formation and Limonitic Sandy Decomposition Residuum, so we plan for changing material along a route such as Banks Street.

What bore sizes and lengths can Trinity handle for a Caldwell job near Banks Street?

We handle 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size and length depend on the job plan near Banks Street, including what the line carries and what the route crosses. A sketch or plans help us assess the path and pits.

How much notice does Texas811 need for a Caldwell bore near Presidential Corridor?

For work near Presidential Corridor, make the Texas811 locate request at least 48 hours before excavation, not counting weekends or legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new notice. On Caldwell’s incorporated city streets, we refresh worn or moved marks before boring continues.

What affects the cost of directional boring in Caldwell near Texas State Highway 21?

The scope sets the price, with Caldwell’s clay and the number of crossings among the main factors. Texas State Highway 21 pavement, railroad or creek crossings, pipe size and length, utilities to expose, pits, backfill and excavator time all affect the plan. Mobilization also matters because Caldwell is 380 road miles from our Yukon yard.

Where the Caldwell facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Caldwell

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Caldwell, Texas

Type the address of your job in Caldwell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Caldwell

Same county: Somerville · Snook · Clay. All counties: Texas county list.