Queen City Texas Directional Boring: Bowie Fine Sandy Loam, US 59 and Cypress Creek
Quick Answer: US 59 is a major route through Queen City, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings and utility runs here. From our Yukon, Oklahoma main office, Queen City is 345 road miles away, so a bore near Lanark Street needs access and mobilization planned with the route. The USDA soil survey maps sandy clay loam at 40 inches across 63% of the city, with clay that can hold a hole and grip pipe. Staged reaming and ready pipe help control Bowie soil.
Queen City bores at a glance
- Incorporated city in Cass County, Texas. Population 1,391 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 345 miles, about 6.8 hours of driving.
- Ground: Bowie soil is mapped on 29 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 14 percent of the area.
- Highways inside the boundary: US 59, Loop 236, FM 74, FM 2791 and FM 785. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
- Named streams inside the boundary: Cypress Creek.
- Public water: City of Queen City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Cypress Creek in Queen City?
US 59 is a key route through Queen City, and we take directional boring work for utility runs and crossings in Cass County. Queen City’s Census Bureau Vintage 2024 population is 1,391, a scale we consider when planning underground work. We install water, sewer, gas, electric conduit and fiber; along Lanark Street or near Cypress Creek, the route and line type help shape the bore plan.
Our main office is in Yukon, Oklahoma, and Queen City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A typical Queen City job near US 59 or Cypress Creek is much shorter, but still needs a planned path through the local ground.

What does the soil survey show about Queen City and Bowie soil?
The USDA soil survey maps Bowie fine sandy loam on 29% of Queen City, with Sailes fine sandy loam on another 20%. At about 40 inches below the surface, sandy clay loam covers 63% of the mapped area and clay covers 22%. The survey maps soil patterns, not conditions at a specific bore. That mix can make the hole sticky and can let clay grip the pipe, so the crew needs to manage fluid and reaming rather than assume the surface texture continues below.
| USDA soil survey, inside the Queen City city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 29 percent, Cuthbert 21 percent, Sailes 20 percent, Kirvin 19 percent and Briley 3 percent |
| Texture at the surface | fine sandy loam 66 percent, gravelly fine sandy loam 18 percent and very fine sandy loam 8 percent |
| Texture about 40 inches down | sandy clay loam 63 percent, clay 22 percent and clay loam 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 46 percent, clayey sand (SC) 31 percent and silt (ML) 14 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | 14 percent of the area (0 percent hard rock, 14 percent weathered rock) |
| Seasonal water table within 60 inches | 33 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 67 percent of the area |
The survey maps bedrock within 60 inches on 14% of Queen City, with a typical depth of 37 inches where mapped. The Queen City Sand geologic unit is Lutetian age and includes sandstone and siltstone, so a bore may encounter slower, weathered material. A seasonal water table is mapped within 60 inches on 33% of the area, while flood prone soils cover 3%. High steel corrosion risk is mapped on 67%, a reason for the line owner to consider casing and tracer wire materials.
What does it take to bore Queen City’s sandy clay loam?
Queen City soil changes with depth: fine sandy loam is common at the surface, while sandy clay loam and clay dominate the mapped material at about 40 inches. We shape the fluid, reaming and pullback plan to that change.
- At about 40 inches, Queen City maps sandy clay loam and clay; we use controlled fluid and staged reaming to limit sticky buildup around the reamer.
- With the Queen City survey showing seasonal water within 60 inches on 33% of the area, we plan smaller pits and pumping where wet ground calls for it.
- The 14% of Queen City mapped with bedrock within 60 inches can mean slower drilling through weathered sandstone or siltstone in the Queen City Sand unit.
- At each marked utility on a Queen City bore path, we hydrovac pothole before drilling nearby; a walkover locator tracks the head and logs depth and pitch.

What does a bore have to cross in Queen City near Lanark Street?
US 59 has 2.7 mapped roadway miles inside Queen City. Loop 236, FM 74, FM 2791 and FM 785 also run through the limits, and Texas State Highway 43 is 0.2 miles outside them. Lanark Street is the longest named street at 2.53 miles, followed by Houston Street at 1.54 miles and Second Street at 1.24 miles. A route under any of these roads needs a profile that clears the pavement and marked lines without cutting the travel surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 59 | US highway | 2.7 roadway miles inside | State highway office |
| Loop 236 | State highway | 1.4 roadway miles inside | State highway office |
| FM 74 | State highway | 1.3 roadway miles inside | State highway office |
| FM 2791 | State highway | 1.1 roadway miles inside | State highway office |
| FM 785 | State highway | 0.9 roadway miles inside | State highway office |
| Texas State Highway 43 | Highway nearby | 0.2 miles outside | State highway office |
| Union Pacific | Railroad | 2.73 track miles inside | The railroad |
| Cypress Creek | Stream | 0.44 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Haw Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Line Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Black Bayou | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.73 track miles inside Queen City, with four mapped street and rail crossings. A crossing under that track needs an agreement from Union Pacific that sets casing, depth and flagging. Cypress Creek runs 0.44 channel miles within the city, and no mapped street crossings of named streams are shown. If a bore is planned at Cypress Creek, the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Whose permission does a Queen City bore under US 59 need?
For work in the US 59 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Atlanta District reviews it. The bore plan and profile are prepared for the utility owner’s application. Electric and communication lines crossing US 59 need at least 60 inches of cover below the lowest point of the crossed grade; water lines also need 60 inches, and pressurized sewer lines need 60 inches. TxDOT rules call for boring or tunneling beneath an existing highway, so we plan the crossing accordingly.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Queen City, Cass County?
The City of Queen City public water system serves 1,398 people through 775 service connections and draws from groundwater wells. For electric service in Cass County, utilities reporting to EIA include Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative. The utility that owns the line at a specific Queen City address must be confirmed before conduit work is planned.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Queen City | Public water system | Groundwater wells | 775 connections, 1,398 people served |
| Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Cass County | EIA Form 861 | Confirm the line owner by address |
Queen City’s American Community Survey 2019 to 2023 five year estimates put median housing year at 1978, context we consider for underground work. The estimates show 25% of homes built before 1960 and 23% built in 2000 or later, so a project may involve replacement work or a newer service run. Before drilling near a marked line on Lanark Street, we hydrovac pothole it to expose its depth; paint gives the route, not the depth.

What is near Queen City and how far do we travel from Atlanta?
Queen City is in Cass County, covers 3.54 square miles and sits at an elevation of 335 feet. In Queen City, ZIP code 75572 helps us confirm the service area before planning a boring route. Atlanta is 2.7 miles south and is the nearest larger city; Bloomburg is 5.5 miles east. Linden, the county seat, is 15.5 miles southwest. Our Yukon yard is 345 road miles away, a 6.8 hour drive, so that distance is part of planning a bore near US 59 or a rural site outside Queen City.
Places near Queen City
- Directional boring in Atlanta: 2.7 miles south
- Directional boring in Bloomburg: 5.5 miles east
- Directional boring in Domino: 8.2 miles north
- Directional boring in Bivins: 9.3 miles south
- Directional boring in Douglassville: 11.8 miles west
What boring work comes up near Cypress Creek in Queen City?
- Highway crossing: A bore beneath US 59 is planned around the travel lanes, required cover and the utility marks along the route.
- Water service: A connection to the City of Queen City groundwater system needs a path sized for the service line and nearby buried utilities.
- Fiber route: A fiber conduit run along Lanark Street can avoid open cuts through pavement, with marked lines exposed before drilling near them.
- Creek crossing: A route at Cypress Creek needs depth planning below the channel and a check for federal jurisdiction during planning.
- Rail crossing: A bore beneath the Union Pacific track needs an agreement covering its casing, depth and flagging requirements.
- Rural service: A longer run outside Queen City toward Atlanta needs its route, access and distance from the Yukon yard included in the plan.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Queen City bore near Union Pacific?
A map pin matters around Queen City because the path could be close to US 59, Cypress Creek or the Union Pacific track. For Queen City work, send the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route and access before we put together the bore scope.
The 345 road miles from Yukon affect mobilization for Queen City work. Bowie soil and the clay mapped below it affect drilling time and fluid control; a crossing near US 59 or Union Pacific adds clearance and coordination needs. Price also reflects bore length and pipe size, utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time and sand backfill. Emergency or high profile work can add demands to the plan.
Questions people ask about boring in Queen City
Does Trinity Boring Solutions take directional boring work in Queen City and Cass County?
Yes. We take directional boring work in Queen City and across Texas, planning each route around the local crossing. Our own crews and partner contractor yards that Trinity has vetted support the work, while customers deal with Trinity through the bore log. A route near US 59 or Cypress Creek is planned for its specific access and ground conditions.
Who approves a bore under US 59 in Queen City, and what should we confirm before setting the crossing route?
TxDOT handles a utility permit for work in the US 59 right of way through its Atlanta District. The utility owner submits the application in RULIS, with a bore plan and profile prepared for it. The highway’s required cover and the exact crossing location shape the proposed bore.
For a Queen City bore under Union Pacific track, what crossing requirements should we confirm before setting the route?
A crossing under the Union Pacific track requires an agreement from the railroad. That agreement sets the casing, depth and flagging details for the crossing. With 2.73 track miles inside Queen City, the proposed route needs to be identified before the bore plan is prepared.
Can a utility line be bored under Cypress Creek in Queen City?
A bore may be planned under Cypress Creek, subject to the crossing conditions and planning review. The creek runs 0.44 channel miles inside Queen City, and a planned water crossing is checked for U.S. Army Corps of Engineers jurisdiction. The bore path must be set to pass beneath the channel.
Who runs Queen City’s public water system, and where does its water come from before we plan nearby boring work?
The City of Queen City runs the public water system, which uses groundwater wells. Queen City’s system serves 1,398 people through 775 service connections, figures we consider when planning underground utility work. For a water line project, the system’s location and existing buried utilities help determine the bore route.
Which electric providers should I check in Cass County for a Queen City conduit bore?
EIA reports Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative as serving Cass County. That list does not identify the provider for every address. Confirm the actual line owner before settling conduit specifications for a route near FM 74 or another Queen City road.
Does Queen City boring service also cover Atlanta and nearby rural sites?
Yes. We take work in Queen City, nearby Atlanta and rural sites beyond the city limits. Atlanta is 2.7 miles south, and the route to a specific job determines access and mobilization. A map pin near US 59 or outside the limits helps us assess the site.
How much notice is needed for a bore on Lanark Street in Queen City, and what about the marks?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Queen City work, if the start slips more than 14 days past the original notice, we submit a new request. For a Lanark Street bore, worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring near US 59 in Queen City?
The scope sets the price, not just the length. For a Queen City bore, factors include distance from Yukon, the sandy clay loam and clay in the soil survey, pipe size, marked utilities, pavement near US 59, and any creek or drainage crossing. Pits, excavator time, backfill and emergency work also affect the plan.
Where the Queen City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Queen City
- U.S. Census Bureau, TIGER/Line 2024: Queen City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Queen City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Queen City housing units and year built
- Macrostrat geologic map compilation: map units under Queen City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Queen City
- U.S. Department of Transportation, North American Rail Network: track owners in Cass County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cass County
- U.S. Geological Survey, Elevation Point Query Service: Queen City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Queen City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Queen City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Queen City, Texas
Type the address of your job in Queen City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Queen City
Same county: Linden · Hughes Springs · Avinger · Marietta · McLeod. All counties: Texas county list.
