trinityboringsolutions.com

Canutillo Texas Directional Boring: Gila Soil, Río Grande And BNSF Railway

Quick Answer: At Canutillo’s 4.63 track miles of BNSF Railway, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes beneath pavement. Doniphan Drive and Levee Road account for parts of 53.54 public road miles, and the Yukon, Oklahoma main office is 672 road miles away. The USDA survey maps Gila soil across 28 percent and silt loam across 35 percent at 40 inches. That silt loam can soften with excess fluid, while sandy ground needs support as a Canutillo bore opens.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Canutillo bores at a glance

  • Unincorporated community in El Paso County, Texas. Population 6,212 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 672 miles, about 13.6 hours of driving.
  • Ground: Gila soil is mapped on 28 percent of the area, with silt loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 20, FM 259 and Loop 375. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Río Grande, Canutillo Lateral, Nemeyas Drain and Nemexas Drain.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along Doniphan Drive in Canutillo?

Canutillo is an unincorporated community in El Paso County, where the 2020 Census count was 6,212; the Census Bureau does not publish yearly estimates for unincorporated places. Along Doniphan Drive, Levee Road or a service route near the Río Grande, our crews can bore water, sewer, gas, electric conduit or fiber lines without opening the full surface route.

Our main office is in Yukon, Oklahoma, and Canutillo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982; for a route near Doniphan Drive, our equipment handles 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show for Gila soil in Canutillo?

The USDA soil survey maps Gila soil across 28 percent of Canutillo, with Bluepoint at 18 percent and Harkey at 15 percent; these are mapped area patterns, not test borings. At about 40 inches below the surface, silt loam covers 35 percent of mapped texture, while sandy ground accounts for 43 percent and gravelly ground for 43 percent. For a bore near Doniphan Drive, those changes can mean an easy cutting section followed by ground that needs support behind the reamer.

USDA soil survey, inside the Canutillo mapped community boundaryWhat is mapped
Soil series mappedGila 28 percent, Bluepoint 18 percent, Harkey 15 percent, Pajarito 12 percent and Delnorte 10 percent
Texture at the surfacefine sandy loam 37 percent, loamy fine sand 18 percent and silty clay loam 13 percent
Texture about 40 inches downsilt loam 35 percent, stratified sand to loamy fine sand to very fine sandy loam 18 percent and fine sandy loam 12 percent
Engineering class about 40 inches downsilt (ML) 42 percent, clayey sand (SC) 12 percent and clayey gravel (GC) 10 percent
Average clay content about 40 inches down14 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel24 percent of the area

USDA mapping shows bedrock is not mapped in the top five feet of Canutillo; that does not rule out deeper rock along a route near the Río Grande. Seasonal water table and flood prone soils are not mapped, although the alluvium unit of Holocene age follows stream settings and can include sand, silt, clay and gravel. High steel corrosion risk is mapped under 24 percent of the area, so the line owner should weigh casing and tracer wire materials; HDPE avoids that steel corrosion concern.

How do crews handle silt loam on a Canutillo bore?

Canutillo soil changes below the surface, so we match fluid and reaming to what the bit meets rather than treating Doniphan Drive as one uniform run.

  1. Where silt loam is mapped at 40 inches in Canutillo, we control fluid pressure so soft ML ground does not wash out or soften steering.
  2. With sandy and gravelly ground each mapped under 43 percent at that depth, we use bentonite support and staged reaming to keep the open hole stable.
  3. If gravel shifts the head near a Canutillo Lateral crossing, locator readings on depth and pitch guide corrections rod by rod.
  4. Before drilling near Talbot Avenue, we hydrovac expose each marked utility on the route because surface marks show position, not burial depth.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What could a Canutillo bore cross near BNSF Railway?

Texas State Highway 20 runs 4.6 mapped roadway miles inside Canutillo, while FM 259 and Loop 375 add 0.6 and 0.5 miles. Interstate 10, US 180 and US 85 lie 0.1 miles from the mapped community boundary, so a route may encounter state highway right of way even when its address is on a local street. Doniphan Drive is the longest named street at 4.63 miles; Levee Road spans 2.63 miles and Strahan Road 1.51 miles. A bore plan needs the actual crossing points, not just the road name.

CrossingTypeMapped extentWho has a say
Texas State Highway 20State highway4.6 roadway miles insideState highway office
FM 259State highway0.6 roadway miles insideState highway office
Loop 375State highway0.5 roadway miles insideState highway office
Interstate 10Highway nearby0.1 miles outsideState highway office
US 180Highway nearby0.1 miles outsideState highway office
US 85Highway nearby0.1 miles outsideState highway office
FM 28Highway nearby0.6 miles outsideState highway office
BNSF RailwayRailroad4.63 track miles insideThe railroad
Río GrandeStream4.75 channel miles insideChecked for Corps of Engineers jurisdiction
Canutillo LateralStream1.53 channel miles insideChecked for Corps of Engineers jurisdiction
Nemeyas DrainStream0.58 channel miles insideChecked for Corps of Engineers jurisdiction
Nemexas DrainStream0.34 channel miles insideChecked for Corps of Engineers jurisdiction
Vinton Cutoff LateralStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Vinton River DrainStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 4.63 track miles inside Canutillo, and public mapping shows 5 mapped street and rail crossings, so a rail route needs its own crossing coordination. The Río Grande runs 4.75 channel miles in the community; Canutillo Lateral runs 1.53, and six mapped street crossings intersect named streams. Nemeyas Drain and Nemexas Drain also appear in the mapped network. No lakes or ponds are mapped within one mile, which keeps the crossing review focused on tracks, streams and drains.

Do I need a permit for a Canutillo bore in El Paso County?

Canutillo has no city government, so street authority depends on whether a route is on county or state right of way. For Texas State Highway 20, FM 259 or Loop 375, the TxDOT El Paso District reviews the utility permit; the line owner files through RULIS, while we prepare the bore plan and profile. At highway crossings, TxDOT rules generally call for 60 inches of cover for electric, communication, water and pressurized sewer lines, subject to the district permit. Existing highway pavement is crossed by boring or tunneling, not an open trench. A BNSF Railway crossing needs an agreement with the track owner, and a Río Grande crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines should I check in Canutillo, El Paso County?

For a bore near Levee Road, confirm the water provider for that Canutillo address with El Paso County or the local water district before planning. EPA drinking water records do not tie a named provider to the community. El Paso Electric and Rio Grande Electric Cooperative report electric service in El Paso County, but neither report identifies the owner of a particular Doniphan Drive line; we verify ownership before setting conduit specifications.

Line ownerWhat it isSourceSize
El Paso Electric and Rio Grande Electric CooperativeElectric utilities reporting service in El Paso CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Canutillo’s median year built at 1994, with 7 percent of homes built before 1960, 54 percent from 1960 to 1999 and 39 percent in 2000 or later. A bore at Levee Road may serve a newer connection or replace an older buried line; age alone does not identify material or depth. Before a drill nears any marked utility along Doniphan Drive, we use hydrovac potholing to expose it, since paint shows position but not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover Canutillo near Prado Verde?

Canutillo is an unincorporated census designated place in El Paso County, at 3,768 feet and covering 2.75 square miles. Its ZIP codes are 79835 and 79932. Prado Verde lies 2.1 miles south, Vinton 2.9 miles north, Westway 3.2 miles northeast and Anthony 4.7 miles north. El Paso, the county seat and nearest larger city, is 11.1 miles southeast. From the Yukon, Oklahoma main office, the route is 672 road miles and 13.6 drive hours, which matters when a job needs mobilization.

Places near Canutillo

Which Canutillo jobs call for a bore near Levee Road?

  • Highway crossing: A bore beneath Texas State Highway 20 follows TxDOT requirements and keeps existing pavement intact rather than opening a trench.
  • Rail crossing: A route beneath BNSF Railway needs coordination with the track owner and an agreement defining crossing conditions.
  • Creek crossing: A Río Grande or Canutillo Lateral crossing needs a planned path and a check for U.S. Army Corps of Engineers jurisdiction.
  • Service replacement: A replacement along Levee Road can use hydrovac potholes to verify marked utilities before the drill approaches older buried infrastructure.
  • Fiber conduit: Fiber along Doniphan Drive can be installed by a bore that passes below pavement, with line size and route shaping the setup.
  • Drainage crossing: A bore near Nemeyas Drain needs a profile that accounts for the mapped channel and any utility crossings on the approach.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Canutillo bore near Talbot Avenue?

For a Canutillo quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help us assess a route near Talbot Avenue. A plan showing BNSF Railway or Canutillo Lateral crossing points helps us see where the route leaves ordinary street work.

A short, clearly mapped service route along Doniphan Drive is easier to scope than a route crossing Texas State Highway 20, BNSF Railway or the Río Grande. Price reflects length, line size, Gila and sandy or gravelly ground, utilities that must be exposed, pavement, drainage crossings, pits and excavator time. Canutillo is 672 road miles from Yukon, so mobilization matters; emergency timing and a high profile route can also change the work plan.

Questions people ask about boring in Canutillo

Does Trinity take directional boring work in Canutillo, El Paso County, and how are crews assigned?

Yes. Trinity takes directional boring work in Canutillo, El Paso County, with our own crews and partner contractor satellite yards we have vetted. Your point of contact stays Trinity from the initial call through the bore log, so the Canutillo job does not depend on which crew is on site.

Can a new line be bored under the Río Grande at Canutillo?

A planned bore can pass beneath the Río Grande, but the alignment, depth and access need to be checked for the specific crossing. During planning we check whether the Río Grande route falls under U.S. Army Corps of Engineers jurisdiction; mapped channel mileage alone does not establish the permit path.

Who owns electric lines in Canutillo, El Paso County, and who confirms conduit specs?

El Paso Electric and Rio Grande Electric Cooperative report electric service in El Paso County; that does not tell us who owns the conductor or conduit at every Canutillo address. We confirm the actual line owner before selecting electric conduit specifications for a Doniphan Drive bore.

Who is responsible for Strahan Road in Canutillo, and does the road need to be cut?

Canutillo is an unincorporated community, so it has no city government; responsibility for Strahan Road depends on whether the segment is county or state right of way. A bore can avoid cutting pavement, but the road authority and any required approvals must be established for that route before work.

How old are homes and buried lines near Levee Road in Canutillo?

American Community Survey 2019 to 2023 five year estimates put the median Canutillo home year at 1994; 7 percent were built before 1960 and 39 percent in 2000 or later. A Levee Road replacement bore still needs the existing line identified and exposed, since building age does not show utility depth or condition.

What ground should I expect for a Canutillo bore through Gila soil?

Gila is the most common mapped soil series in Canutillo at 28 percent, while the USDA survey maps silt loam across 35 percent of soil texture at about 40 inches. That is a mapped pattern, not a test boring; sandy and gravelly ground can require support as the bore hole is opened.

Can I reach Trinity after hours for an urgent Canutillo bore near Strahan Road?

Yes. The number (405) 409-7423 is answered 24 hours a day, including for an urgent bore near Strahan Road. Trinity also offers 24 hour emergency response, and the Yukon office remains the contact point when the requested Canutillo work needs an after hours call.

How much notice does Texas811 need for a Canutillo bore near Doniphan Drive?

For a bore near Doniphan Drive, contact Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, submit a new request; marks that wear off or shift must be refreshed through Texas811 before work continues.

What affects the cost of a Canutillo directional bore near Texas State Highway 20?

Cost for a Canutillo bore depends on the route and scope, not a single rate. Length, pipe size, Gila and gravelly ground, how many utilities need hydrovac exposure, pavement, drainage crossings and pits all matter. A crossing at Texas State Highway 20 or BNSF Railway and the 672 road miles from Yukon can add planning or mobilization work.

Where the Canutillo facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Canutillo

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Canutillo, Texas

Type the address of your job in Canutillo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Canutillo

Same county: Socorro · Horizon City · San Elizario · Fort Bliss · Fabens · Homestead Meadows South · Homestead Meadows North · Sparks · Agua Dulce · Tornillo · Clint · Morning Glory. All counties: Texas county list.