Tornillo Texas Directional Boring: Harkey Soil, Union Pacific and Tornillo Canal
Quick Answer: Tornillo is an unincorporated community in El Paso County, so it has no city government; we do directional boring, also called horizontal directional drilling (HDD), for routes such as Shaffer Road. Texas State Highway 20 is among the crossings to plan, and our Yukon main office is 701 road miles away. Harkey silty clay loam can hold a hole and cling to a reamer, so we adjust fluid and reaming to the ground. Fabens is 5.9 miles northwest, a nearby point for discussing access.
Tornillo bores at a glance
- Unincorporated community in El Paso County, Texas. Population 1,432 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 701 miles, about 13.1 hours of driving.
- Ground: Harkey soil is mapped on 29 percent of the area, with stratified fine sand to silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 20. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: Union Pacific, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Tornillo Canal, Alamo Alto Drain, Tornillo Drain and Border Drain.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring on Shaffer Road in Tornillo?
Tornillo is an unincorporated community in El Paso County, so there is no city government to own its streets; responsibility depends on whether a route is county or state owned. The Census Bureau counted 1,432 residents in 2020 and does not publish yearly estimates for unincorporated places. We bore water, sewer, gas, electric conduit and fiber lines beneath routes such as Shaffer Road, Henderson Road or Texas State Highway 20 when the route and approvals fit.
Our main office is in Yukon, Oklahoma, and Tornillo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near Henderson Road, a 3/4 inch service line is at the small end of our 3/4 inch to 48 inch casing range; a large casing job is at the other end. Our family business started in 1965, and we have done directional boring since 1982 while planning work in Tornillo.

How does Harkey soil affect boring in Tornillo?
The USDA soil survey maps Harkey as 29% of the soil series in Tornillo, followed by Glendale at 27%. Harkey silty clay loam covers 15% of mapped area, while Harkey loam covers 14%. Across the community, surface texture is silty clay loam on 40% and silty clay on 30%. At about 40 inches below the surface, the leading mapped texture is stratified fine sand to silty clay loam at 26%; silt loam accounts for 20%. These are mapped patterns, not test borings, so the actual route still needs field assessment.
| USDA soil survey, inside the Tornillo mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Harkey 29 percent, Glendale 27 percent, Saneli 15 percent, Tigua 13 percent and Bluepoint 6 percent |
| Texture at the surface | silty clay loam 40 percent, silty clay 30 percent and loam 17 percent |
| Texture about 40 inches down | stratified fine sand to silty clay loam 26 percent, silt loam 20 percent and loam 14 percent |
| Engineering class about 40 inches down | silt (ML) 34 percent, silty sand (SM) 30 percent and sand with silt (SP SM) 15 percent |
| Average clay content about 40 inches down | 22 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 62 percent of the area |
Bedrock is not mapped in the top five feet in Tornillo, though that does not rule out rock deeper down. For work in Tornillo, we treat seasonal water table conditions and flood prone soils as unmapped during boring planning. High steel corrosion risk is mapped across 62% of the area, which calls for the line owner to consider casing and tracer wire protection; HDPE avoids that steel corrosion concern. The geologic map shows Alluvium of Holocene age, with sand, silt, clay and gravel along streams, so conditions can vary near Tornillo Canal.
What does it take to bore Tornillo’s stratified fine sand to silty clay loam?
Tornillo’s mapped mix of Harkey clay loam and stratified fine sand calls for a bore plan that responds to changing ground. We choose fluid, reaming stages and pipe timing for the route, not just the soil label.
- Harkey silty clay loam can stay open and stick to the reamer; we tune the fluid and ream in stages to avoid pulling against a tight hole.
- Where Tornillo’s mapped texture shifts toward fine sand, we build a stabilizing fluid wall and have the pipe ready before the final reaming pass.
- At a crossing near Texas State Highway 20, we keep fluid pressure controlled beneath pavement and track the head’s depth and pitch as the bore advances.
- Near Tornillo Canal, we plan the pits and depth around the channel; marked utilities on the route are exposed by hydrovac before the drill approaches.

Which roads, tracks or creeks might a Tornillo bore cross near Union Pacific?
Texas State Highway 20 has 1.6 mapped roadway miles inside Tornillo, so a bore in its right of way needs state review rather than a street permit from a town government. Shaffer Road is the longest named street at 1.98 miles, followed by Henderson Road at 1.62 miles and Alameda Avenue at 1.58 miles. A route along any of them still needs utilities exposed and access for pits planned. Boring can leave pavement and driveways uncut, but the crossing design must account for the road and the lines beneath it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 20 | State highway | 1.6 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.26 track miles inside | The railroad |
| Tornillo Canal | Stream | 1.5 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Alamo Alto Drain | Stream | 1.5 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Tornillo Drain | Stream | 1.46 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Border Drain | Stream | 1.42 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Río Grande | Stream | 1.4 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Fabens Waste Channel | Stream | 0.82 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Island Drain | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Upper Tornillo Drain | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| I- 243 Lateral | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.26 track miles inside the community, and 11 mapped street and rail crossings make track conflicts a route planning issue. A crossing needs an agreement with the railroad that owns the track. Tornillo Canal and Alamo Alto Drain each have 1.5 channel miles mapped inside Tornillo; the Río Grande has 1.4. Public mapping shows 16 street crossings of named streams, so a channel route needs careful alignment and review.
Do I need a permit to bore under roads in Tornillo and El Paso County?
Tornillo has no city government because it is an unincorporated community, so street and land permissions depend on whether the route is county or state property. For Texas State Highway 20, TxDOT’s El Paso District reviews the utility permit. The utility owner, not our drilling crew, applies through TxDOT’s RULIS system; we provide the bore plan and profile and work under the utility’s permit. A crossing of Union Pacific track needs an agreement from that railroad. For a crossing of Tornillo Canal or another waterway, planning checks whether the U.S. Army Corps of Engineers has jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Tornillo and El Paso County?
The water provider for a specific Tornillo address has to be confirmed with the county or local water district before we plan a bore; available EPA records do not match a provider to this community. El Paso Electric and Rio Grande Electric Cooperative report electric service in El Paso County, but that does not identify the owner at every address. Before an electric conduit bore near Alameda Avenue, we confirm the line owner and pothole marked utilities along the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| El Paso Electric and Rio Grande Electric Cooperative | Electric utilities reporting service in El Paso County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Tornillo’s median housing year at 1991; 7% of homes were built before 1960 and 20% in 2000 or later. Replacement work along Henderson Road may meet older buried service lines, while newer construction can mean a new connection. We hydrovac pothole marked lines before drilling near them, since paint along Henderson Road shows position, not depth.

Do you cover Tornillo and nearby Fabens?
Tornillo is an unincorporated community in El Paso County, covering 3.47 square miles at an elevation of 3,585 feet. Its ZIP code is 79853. Fabens is 5.9 miles northwest and is the nearest larger place; Morning Glory is 10.8 miles northwest. El Paso, the county seat, is 34.3 miles northwest. Our Yukon, Oklahoma main office is 701 road miles from Tornillo, a 13.1 hour drive, so that distance can affect mobilization for work near Texas State Highway 20 or Tornillo Canal.
Places near Tornillo
- Directional boring in Fabens: 5.9 miles northwest
- Directional boring in Morning Glory: 10.8 miles northwest
- Directional boring in Clint: 12.9 miles northwest
- Directional boring in San Elizario: 13.5 miles northwest
- Directional boring in Acala: 13.8 miles southeast
What boring work comes up near Tornillo Canal?
- Highway crossing: A bore beneath Texas State Highway 20 needs a route and profile that fit TxDOT review and keep the pavement intact.
- Street service: A water or sewer service under Henderson Road can avoid an open cut, with marked lines exposed before drilling near them.
- Fiber conduit: A conduit route along Alameda Avenue needs the electric line owner confirmed before we plan the path.
- Canal crossing: A bore near Tornillo Canal needs channel conditions considered, with jurisdiction checked during planning.
- Rail crossing: A route beneath Union Pacific track needs a railroad agreement that addresses the crossing conditions.
- Drainage bore: A line near Alamo Alto Drain needs a path and pit locations set to avoid cutting the channel banks.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Tornillo work near Texas State Highway 20?
For a quote near Shaffer Road or Texas State Highway 20, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help us trace the route. Note if the line approaches Union Pacific track, Tornillo Canal or a marked utility, since those features affect the work plan.
A short service bore on a clear stretch of Shaffer Road is simpler to plan than a route with several crossings. Length, pipe or conduit size, soil, exposed utilities, pavement, drainage crossings, pits and excavator time all affect the scope. Harkey clay and sand layers can change reaming needs; work under Texas State Highway 20 or across Union Pacific track adds coordination. The 701 road miles from Yukon also matter when planning mobilization.
Questions people ask about boring in Tornillo
Does Trinity take directional boring jobs in Tornillo and El Paso County?
Yes. We take directional boring work in Tornillo, and the crew can come from our own teams or a satellite yard operated by a drilling contractor we have vetted. For Tornillo work, we coordinate with Trinity through the bore log regardless of which crew is on site. Shaffer Road and Texas State Highway 20 are examples of route features we would review.
How old are buried lines near Henderson Road in Tornillo?
The American Community Survey 2019 to 2023 estimates put the median housing year in Tornillo at 1991, with 7% of homes built before 1960. That does not date the buried lines, but replacement bores near Henderson Road may encounter older services. We pothole marked utilities first and verify their depth before the drill gets close.
Does Harkey soil in Tornillo corrode steel pipe, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 62% of Tornillo, so the line owner should consider casing and tracer wire protection. HDPE avoids the steel corrosion concern. Harkey silty clay loam is mapped in the community, but the actual route and the pipe specification should be reviewed before choosing materials.
What ground does a bore pass through in Tornillo near Harkey soil?
The USDA soil survey maps Harkey as 29% of the soil series in Tornillo. At about 40 inches down, stratified fine sand to silty clay loam is the leading mapped texture at 26%. That mix can shift from sticky clay to sand that needs support, so mapped soil information guides planning but does not replace checking the bore route.
Could our directional boring in Tornillo encounter rock below the mapped surface during a crossing?
We have no bedrock mapping for Tornillo’s top five feet, so deeper rock remains possible. The geologic map shows Holocene Alluvium with sand, silt, clay and gravel along streams. A route near Tornillo Canal may encounter changing deposits, so we assess the ground and adjust the drilling approach if conditions call for it.
Who must approve our bore beneath Texas State Highway 20 in Tornillo before we plan the crossing?
TxDOT’s El Paso District reviews the utility permit for work in Texas State Highway 20 right of way. The utility owner files through TxDOT’s RULIS system, not the drilling contractor. We supply the bore plan and profile for the utility’s application. A nearby Union Pacific crossing is a separate railroad matter and needs that railroad’s agreement.
Can I reach Trinity after hours about an urgent bore near Alameda Avenue in Tornillo?
Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work. For a bore near Alameda Avenue, be ready to describe the route, the line going in and any road, drainage or utility conflict. Our crews also provide 24 hour emergency response.
How much 811 notice is needed for a bore on Shaffer Road in Tornillo?
Paint marks show line position, not depth. Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work is delayed more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed before continuing.
What affects the cost of a bore near Texas State Highway 20 in Tornillo?
The job details set the price: bore length and size, Harkey clay or sand conditions, utilities to expose, pavement, drainage crossings, pits and excavator time all matter. A Texas State Highway 20 crossing adds permit planning, while a Union Pacific crossing needs railroad coordination. Mobilization also reflects the 701 road miles from our Yukon main office.
Where the Tornillo facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Tornillo
- U.S. Census Bureau, TIGER/Line 2024: Tornillo boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Tornillo population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Tornillo housing units and year built
- Macrostrat geologic map compilation: map units under Tornillo
- U.S. Department of Transportation, North American Rail Network: track owners in El Paso County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving El Paso County
- U.S. Geological Survey, Elevation Point Query Service: Tornillo elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Tornillo
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Tornillo
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Tornillo, Texas
Type the address of your job in Tornillo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Tornillo
Same county: El Paso · Socorro · Horizon City · Fort Bliss · Homestead Meadows South · Canutillo · Homestead Meadows North · Anthony · Sparks · Westway · Agua Dulce · Vinton. All counties: Texas county list.
