Westway Texas Directional Boring: Delnorte Soil, Interstate 10, BNSF Railway
Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Westway routes crossing Interstate 10 and its US highways. The Yukon main office is 674 road miles away, and De Alva Drive is one of the mapped community’s longest streets. USDA maps Delnorte soil as extremely gravelly fine sand about 40 inches down, so loose gravel can fall behind the cutting head. We plan around BNSF Railway just outside the mapped community and nearby Vinton access.
Westway bores at a glance
- Unincorporated community in El Paso County, Texas. Population 3,811 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 674 miles, about 13.7 hours of driving.
- Ground: Delnorte soil is mapped on 100 percent of the area, with extremely gravelly fine sand about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10, US 180 and US 85. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring on De Alva Drive in Westway?
Westway is an unincorporated community in El Paso County, and the Census Bureau counted 3,811 people there in the 2020 Census. We install water, sewer, gas, electric conduit and fiber, including service routes along De Alva Drive, Tom Mays Drive and Westway Boulevard. The line type and route determine the bore plan for each address.
Our main office is in Yukon, Oklahoma, and Westway work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. Our 3/4 inch service line to 48 inch casing range can fit a small service route off Westway Boulevard or a larger crossing near Interstate 10.

How does Delnorte soil shape a bore in Westway?
The USDA soil survey maps Delnorte across 100 percent of Westway. Its mapped units are Delnorte-Canutio association, undulating, across 97 percent, and the hilly association across 3 percent. The surface is mapped as very gravelly loam, while the texture at about 40 inches is extremely gravelly fine sand. All of the mapped area is sandy and gravelly at that depth, with an average clay share of 8 percent. These are soil survey patterns, not test borings, so a site check still matters before we choose the reaming plan.
| USDA soil survey, inside the Westway mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Delnorte 100 percent |
| Texture at the surface | very gravelly loam 100 percent |
| Texture about 40 inches down | extremely gravelly fine sand 100 percent |
| Engineering class about 40 inches down | clayey gravel (GC) 100 percent |
| Average clay content about 40 inches down | 8 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Bedrock is not mapped in the top five feet of Westway, but that does not rule out rock deeper down. The geologic map includes older alluvial deposits of Cenozoic age, with sand, pebbles and larger rock fragments; it also maps Permian Paleozoic sedimentary rocks. Delnorte’s gravel can make the drill head wander, so we check depth and pitch as the bore advances. The survey maps no seasonal water table, flood prone soil or high steel corrosion risk in the mapped area, but those map patterns do not replace checking the actual route.
How do we drill Westway’s extremely gravelly fine sand?
Delnorte soil in Westway has gravel that can shift or cave behind the drill. We plan the hole so the pipe is ready when reaming is complete, and track the head as it moves.
- Delnorte soil is mapped as gravelly sand at about 40 inches, so we stage the reaming to keep the hole supported as it opens.
- Gravel and larger fragments in Westway’s older alluvial deposits can push the head off line, so we check depth and pitch along the bore.
- On a route near De Alva Drive, we pothole each marked utility with hydrovac before drilling close; paint shows position, not depth.
- We track the head from the surface and log its depth and pitch, keeping pavement on Westway Boulevard intact where the bore can pass below it.

What does a bore have to cross in Westway near BNSF Railway?
Interstate 10, US 180 and US 85 each have 1.7 mapped roadway miles inside Westway. Texas State Highway 20 lies 1.2 miles outside the mapped community boundary. For street routes, De Alva Drive is 1.16 miles long, Tom Mays Drive is 0.97 miles and Westway Boulevard is 0.84 miles. A bore can carry a utility beneath pavement instead of opening a cut across these routes, subject to the road owner’s approval and any required permit.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 1.7 roadway miles inside | State highway office |
| US 180 | US highway | 1.7 roadway miles inside | State highway office |
| US 85 | US highway | 1.7 roadway miles inside | State highway office |
| Texas State Highway 20 | Highway nearby | 1.2 miles outside | State highway office |
| BNSF Railway | Railroad nearby | 0.1 miles outside | The railroad |
BNSF Railway is 0.1 miles outside the mapped community boundary, and no railroad is mapped inside it. No street and rail crossings are mapped inside Westway. There are no named streams or lakes mapped inside or within one mile, though the community has 1.43 miles of unnamed drainage. The route still needs a site review for drainage features before we set pits or a bore path.
Who approves a Westway bore in El Paso County?
Westway has no city government, so a bore on a local street such as De Alva Drive needs approval from the responsible county authority. Interstate 10, US 180, US 85 and nearby Texas State Highway 20 are state routes. For work in their right of way, the utility owner, not the drilling contractor, applies through TxDOT’s RULIS system; the TxDOT El Paso District reviews it. For a Westway utility owner application, we provide the bore plan and profile so the proposed crossing can be reviewed. TxDOT cover rules depend on the line: electric and communication crossings need 60 inches, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A BNSF Railway crossing also requires an agreement with the railroad.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines serving Westway in El Paso County?
Before we plan a Westway bore, we confirm the water provider with the county or local water district to avoid routing assumptions. EPA drinking water records for Texas do not tie systems to towns, so a provider could not be matched to Westway. El Paso Electric and Rio Grande Electric Cooperative report electric service in El Paso County, but the owner at the job address must be confirmed before a conduit bore. On a route near De Alva Drive, hydrovac potholing lets us expose marked water and electric lines before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| El Paso Electric and Rio Grande Electric Cooperative | Electric utilities reporting service in El Paso County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimates, which put Westway’s median housing year at 1988, as context for underground work. The survey shows 7 percent of housing built before 1960, 84 percent from 1960 to 1999 and 9 percent in 2000 or later. Those ages are a clue to ask whether a De Alva Drive job replaces a service or adds one, not proof of buried line age. We pothole marked utilities along the planned path before the drill approaches them.

What is near Westway, including Vinton?
Westway is in El Paso County, covers 1.15 square miles and sits at an elevation of 3,986 feet. Its ZIP code is 79835. Vinton is 1.0 mile west, Anthony is 2.3 miles northwest and Canutillo is 3.2 miles southwest. El Paso, the county seat and nearest larger city, is 11.5 miles southeast. The Yukon yard is 674 road miles away, a drive of 13.7 hours, so that distance is part of planning mobilization for a Westway job.
Places near Westway
- Directional boring in Vinton: 1 miles west
- Directional boring in Anthony: 2.3 miles northwest
- Directional boring in Canutillo: 3.2 miles southwest
- Directional boring in Prado Verde: 5.3 miles southwest
- Directional boring in El Paso: 11.5 miles southeast
What boring work comes up around Westway Boulevard?
- Highway crossing: A utility bore beneath Interstate 10 or US 85 avoids an open cut across the paved route, subject to TxDOT approval.
- Street service: Water or sewer lines can follow a bore beneath De Alva Drive, with potholes to verify marked utilities along the path.
- Fiber route: A conduit bore along Westway Boulevard can pass under pavement while pits stay in the dirt at either end.
- Rail crossing: A route near BNSF Railway needs railroad coordination and a crossing plan before the bore proceeds.
- Drainage crossing: The 1.43 miles of unnamed drainage in Westway call for checking the planned path and pit locations on site.
- Regional service: A line between Westway and nearby Vinton can be scoped by its route, footage and utility crossings.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Westway work near Interstate 10?
Start with a map pin or address, because a location on De Alva Drive is different from a route near Interstate 10 or BNSF Railway. Tell us whether the Westway installation uses pipe or conduit, plus its size and footage, so we can plan the bore. A sketch or plans help us see pits, pavement and possible crossings before we scope the bore.
Price follows the work involved, not just the length. The 674 road miles from Yukon affect mobilization, while Delnorte’s gravelly ground can change how we ream and support the hole. We also account for pipe size, utility crossings that must be exposed, pavement on Interstate 10 routes, drainage, pit and excavator needs, and sand backfill. BNSF Railway proximity can add crossing coordination, and emergency or high profile work can affect planning.
Questions people ask about boring in Westway
Does Trinity take directional boring jobs in Westway and El Paso County, and how are crews assigned?
Yes. Trinity takes directional boring work in Westway and across Texas. Our Yukon main office handles the job from the first call through the bore log, while our own crews or crews from vetted partner contractors may do the field work. That service arrangement applies to a route on De Alva Drive as well as other Westway locations.
Which electric companies report service in El Paso County for a Westway conduit bore?
El Paso Electric and Rio Grande Electric Cooperative report electric service in El Paso County. Neither should be assumed to own the line at every Westway address, so confirm the owner and conduit requirements for the specific route before planning a bore. Near Tom Mays Drive, hydrovac potholing can expose marked electric lines before drilling approaches them.
Who is responsible for Westway Boulevard, and can a bore avoid cutting the street?
Westway is unincorporated and has no city government, so local street approval belongs with the responsible county authority. A bore beneath Westway Boulevard can avoid an open cut through the pavement when the route and approvals allow. We still need the street location and utility marks to plan the pits and crossing.
Does housing age near Tom Mays Drive tell me what replacement bore to plan in Westway?
It gives context, but it does not establish the age of buried lines. The American Community Survey 2019 to 2023 estimates give Westway a median housing year of 1988, with 84 percent of homes built from 1960 to 1999. For a replacement bore near Tom Mays Drive, locate and expose the existing utilities before setting the path.
What ground does a bore pass through in Westway’s Delnorte soil?
The USDA soil survey maps Delnorte throughout Westway, with very gravelly loam at the surface and extremely gravelly fine sand at about 40 inches. Gravel can make the hole unstable behind the drill and can nudge the head off course. We use staged reaming and track depth and pitch for a route off De Alva Drive.
Will our directional bore in Westway hit rock and affect how we plan the route?
The soil survey does not map bedrock in the top five feet, but that does not rule out deeper rock. Westway’s geologic map shows older alluvial deposits as well as Permian Paleozoic sedimentary rocks. A route near Interstate 10 still needs site specific planning because mapped ground does not reveal every condition along a bore.
Does Trinity cover Vinton and rural sites outside Westway too?
Yes. Trinity takes work across Texas, including Westway, nearby Vinton and rural routes outside the mapped community. Vinton is 1.0 mile west of Westway, but each project still needs its own address or map pin, route, line size and footage so we can plan access and mobilization.
How early should I request Texas811 marks for a Westway bore on De Alva Drive?
Request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For a bore along De Alva Drive, describe the planned path clearly. If the start moves more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a Westway bore near Interstate 10?
The job’s length and pipe or conduit size matter, along with Delnorte gravel, pavement and the utilities to expose. A route near Interstate 10 can need highway right of way coordination, while BNSF Railway adds a separate crossing consideration. The 674 road miles from Yukon also affect mobilization; pits, drainage and backfill add to the scope.
Where the Westway facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Westway
- U.S. Census Bureau, TIGER/Line 2024: Westway boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Westway population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Westway housing units and year built
- Macrostrat geologic map compilation: map units under Westway
- U.S. Department of Transportation, North American Rail Network: track owners in El Paso County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving El Paso County
- U.S. Geological Survey, Elevation Point Query Service: Westway elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Westway
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Westway
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Westway, Texas
Type the address of your job in Westway. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Westway
Same county: Socorro · Horizon City · San Elizario · Fort Bliss · Fabens · Homestead Meadows South · Homestead Meadows North · Sparks · Agua Dulce · Tornillo · Clint · Morning Glory. All counties: Texas county list.
