trinityboringsolutions.com

Wildwood Texas Directional Boring: Belrose Soil, Kimball Creek And FM 3063

Quick Answer: Kimball Creek is a key obstacle for a new line, and we do directional boring, also called horizontal directional drilling (HDD), in Wildwood and across Texas. From our Yukon, Oklahoma main office, Wildwood is 462 road miles away, so a bore near FM 3063 needs mobilization planned into the job. Belrose loamy fine sand is mapped across 23 percent of the area. Sand can cave behind the drill, so staged reaming and steady drilling fluid help keep the hole open.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wildwood bores at a glance

  • Unincorporated community in Hardin County and Tyler County, Texas. Population 1,121 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 462 miles, about 9.5 hours of driving.
  • Ground: Belrose soil is mapped on 23 percent of the area, with loamy very fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 3063. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Kimball Creek, Big Sandy Creek and Village Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Black Gum Lane in Wildwood?

We take directional boring work in Wildwood, the unincorporated community spread across Hardin and Tyler counties. The 2020 Census counted 1,121 residents here. Along Black Gum Lane or Wildwood Drive, we install water, sewer, gas, electric conduit and fiber by boring where the route and site allow. A route plan helps us account for nearby lines and the space needed for entry and exit pits.

Our main office is in Yukon, Oklahoma, and Wildwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. That shows the range; a run along Black Gum Lane would be scoped to its own line size, length and ground.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore expect in Wildwood near Belrose soil?

The USDA soil survey maps Belrose soil across 23 percent of Wildwood, including Belrose loamy fine sand on gentle slopes. At about 40 inches below the surface, loamy very fine sand is mapped under 23 percent of the area, while sandy clay loam is mapped under another 23 percent. The survey also maps 26 percent sandy ground at that depth and an average clay content of 13 percent. These are mapped patterns, not test borings. Sand can loosen behind a drill, so the bore plan needs to account for keeping the hole stable.

USDA soil survey, inside the Wildwood mapped community boundaryWhat is mapped
Soil series mappedBelrose 23 percent, Otanya 23 percent, Sorter 16 percent, Kountze 9 percent and Hatliff 7 percent
Texture at the surfacevery fine sandy loam 52 percent, loamy fine sand 23 percent and loam 7 percent
Texture about 40 inches downloamy very fine sand 23 percent, sandy clay loam 23 percent and very fine sandy loam 16 percent
Engineering class about 40 inches downlean clay (CL) 43 percent, silty sand (SM) 26 percent and silt (ML) 16 percent
Average clay content about 40 inches down13 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches57 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel38 percent of the area

Bedrock is not mapped in the top five feet, which does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 57 percent of Wildwood, so pits may need pumping. Flood prone soils cover 7 percent, making Kimball Creek a place to plan channel depth carefully. High steel corrosion risk is mapped across 38 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The Lissie Formation, of Pleistocene age, includes sand, silt and clay.

How is a bore run through Wildwood’s loamy very fine sand?

Wildwood’s loamy very fine sand can fall in behind the drill head, while a seasonal water table can wet the pits. We plan the route, expose marked lines and match the drilling steps to those conditions.

  1. On Belrose loamy fine sand, we use drilling fluid to support the bore wall and ream in stages so loose ground is less likely to cave behind the tool.
  2. Where the seasonal water table reaches within 60 inches, we keep pits compact and pump as needed, especially if wet sand starts moving.
  3. Before approaching a marked line near Black Gum Lane, we hydrovac pothole it to confirm its depth; paint alone shows its position, not its depth.
  4. At a Kimball Creek route, we track the drill head from the surface, log depth and pitch, and plan the bore beneath the channel.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What might a new line cross in Wildwood near Kimball Creek?

FM 3063 runs inside the mapped community boundary, while FM 943 passes 1.3 miles outside it. A bore under FM 3063 has to be planned around the state highway right of way. Black Gum Lane is the longest named street at 2.2 miles inside the community; Wildwood Drive runs 2.13 miles, and Cypress Bend Drive runs 1.25 miles. These roads give a route designer specific corridors to check for access, pavement and existing utilities before setting bore pits.

CrossingTypeMapped extentWho has a say
FM 3063State highway0.4 roadway miles insideState highway office
FM 943Highway nearby1.3 miles outsideState highway office
Kimball CreekStream3.41 channel miles insideChecked for Corps of Engineers jurisdiction
Big Sandy CreekStream2.16 channel miles insideChecked for Corps of Engineers jurisdiction
Village CreekStream0.97 channel miles insideChecked for Corps of Engineers jurisdiction
Walker BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Hickory CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Lake KimballLake or pond149 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Wildwood or within one mile outside the boundary, so there is no mapped rail corridor to plan around. Kimball Creek runs 3.41 channel miles inside the community, Big Sandy Creek 2.16 miles and Village Creek 0.97 miles. One mapped street crossing of a named stream is recorded. Lake Kimball also lies inside the boundary and covers 149 acres, so a proposed water crossing needs its own route review.

Who reviews a highway bore in Wildwood and Hardin County?

Wildwood has no city government, so its unincorporated streets are not city streets; county or state authority depends on the road. For a bore in the FM 3063 right of way, the line owner, not the driller, submits the utility permit application through TxDOT’s RULIS system. Trinity prepares the bore plan and profile for that filing, and the TxDOT Beaumont District reviews it. At a state highway crossing, required cover depends on line type: electric and communications need 60 inches, water needs 60 inches, and pressurized sewer needs 60 inches. Kimball Creek also gets checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should be checked in Wildwood and Hardin County?

The water provider for a specific Wildwood address has to be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie a system to this place, so the provider cannot be matched from those records. For electric service in Hardin County, Entergy Texas and Sam Houston Electric Cooperative report service. The line owner for the address still needs confirmation before we plan an electric conduit bore near FM 3063 or a residential street.

Line ownerWhat it isSourceSize
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Hardin County and Tyler CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Wildwood’s median housing year at 1973; all reported housing units fall in the 1960 to 1999 era. That age does not establish the age of a buried line, but a project on Wildwood Drive may replace older pipe or add a new service. We hydrovac pothole each marked utility on the bore path before drilling near it, such as a marked line near Cypress Bend Drive, because surface marks do not show depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Wildwood from Silsbee and our Yukon yard?

Wildwood covers 4.37 square miles across Hardin and Tyler counties, at an elevation of 97 feet. Its ZIP codes are 77663 and 77625. Warren is 6.2 miles north, Ivanhoe is 10.9 miles north, and Kountze is 13.2 miles southeast; Kountze is the Hardin County seat. Silsbee, the nearest larger city, is 20.4 miles southeast. Our Yukon, Oklahoma yard is 462 road miles away, a 9.5 hour drive. That distance is part of planning crew and equipment mobilization for a bore near FM 3063.

Places near Wildwood

What kinds of bores could serve Cypress Bend Drive in Wildwood?

  • Highway crossing: A bore beneath FM 3063 keeps the existing highway surface uncut, with the line owner handling the right of way permit.
  • Water service: A service run along Wildwood Drive needs the address specific water provider confirmed before the bore route is set.
  • Fiber drop: A fiber conduit near Black Gum Lane can pass below pavement and driveways, with pits placed in dirt at each end.
  • Creek crossing: A line beneath Kimball Creek needs a route and depth plan that accounts for the channel and jurisdiction review.
  • Lake crossing: A proposed route near Lake Kimball needs site specific review because the 149 acre lake lies inside the mapped community boundary.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a directional boring quote for FM 3063 in Wildwood?

For a quote near FM 3063, start with the address or map pin, then tell us what will go underground. Give us the pipe or conduit size and the footage, such as a service run off Cypress Bend Drive. A sketch or plans help show the route, nearby crossings and pit locations. That lets us review the scope before we price it.

Price follows the ground, crossings and logistics of the route. Belrose loamy fine sand and the seasonal water table can affect drilling fluid, reaming and pit work. A crossing at Kimball Creek or work within the FM 3063 right of way adds planning and permit needs. Pipe size, length, marked utilities to expose, pavement, creek or drainage crossings, sand backfill and excavator time also matter. At 462 road miles from Yukon, mobilization is part of the Wildwood job scope.

Questions people ask about boring in Wildwood

Does Trinity take directional boring jobs in Wildwood and Hardin County?

Yes. We take directional boring work in Wildwood across Hardin and Tyler counties. Our crews and vetted partner drilling contractors can staff the work from satellite yards, while our Yukon office remains the main office. For a route on Black Gum Lane, we stay involved from the first call through the bore log, whichever crew is on site.

Who approves a bore under FM 3063 in Wildwood?

The line owner applies for the TxDOT utility permit when work uses the FM 3063 right of way; the driller does not file it. The TxDOT Beaumont District reviews the application. We prepare the bore plan and profile for the owner, and the issued permit governs the work along this state highway.

Can a utility line be bored under Kimball Creek in Wildwood?

A bore under Kimball Creek can be considered, but the route and channel depth need review before drilling. The creek runs 3.41 channel miles inside Wildwood, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The entry and exit pits also need to fit the site.

Who owns electric lines in Wildwood and Hardin County, and who confirms conduit specs?

Entergy Texas and Sam Houston Electric Cooperative report electric service in Hardin County, but that does not identify the provider for every Wildwood address. The line owner for the specific location needs confirmation before a conduit bore. For example, a proposed route by FM 3063 should be checked against the owner’s requirements before plans are set.

Who is responsible for Cypress Bend Drive in Wildwood, and must it be cut?

Wildwood is an unincorporated community with no city government, so Cypress Bend Drive is not managed as a city street. Road authority depends on the road. Directional boring can place a line beneath a road without cutting its surface; the route still needs review for pavement, utilities and suitable pit locations.

How old are homes and buried lines near Wildwood Drive in Wildwood?

The American Community Survey 2019 to 2023 estimates give Wildwood a median housing year of 1973, with reported homes built from 1960 to 1999. That does not tell us the age of a buried line near Wildwood Drive. A replacement bore or new service needs marked utilities exposed and the actual route checked before drilling.

How early should I call Texas811 for a bore on Black Gum Lane in Wildwood?

The person planning the bore calls Texas811 and describes the path along Black Gum Lane. Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the notice, make a new request; refresh marks that wear off or move.

How far is Wildwood from Silsbee and Trinity’s Yukon office, and does it affect the job?

Wildwood is 20.4 miles northwest of Silsbee and 462 road miles from our Yukon, Oklahoma main office, a 9.5 hour drive. That distance can affect mobilization for a job near FM 3063. We review the route, equipment and work scope together when planning a crew trip.

What affects the cost of a directional bore near FM 3063 in Wildwood?

The job scope sets the price, not one factor alone. Belrose soil and seasonal water can affect ground handling; FM 3063 or Kimball Creek can add crossing work and planning. Length, pipe size, utilities to expose, pavement, drainage, pits, sand backfill, excavator time and mobilization from Yukon also affect the work.

Where the Wildwood facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wildwood

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wildwood, Texas

Type the address of your job in Wildwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wildwood

County: Tyler County directional boring. Same county: Lumberton · Sour Lake · Pinewood Estates · Rose Hill Acres · Colmesneil · Chester. All counties: Texas county list.