Weston Lakes Texas Directional Boring: Norwood Loam, Bessies Creek, FM 1093
Quick Answer: Weston Lakes is an incorporated small city, so its city streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for routes near Bessies Creek. Bowser Road is one local route, and Weston Lakes is 466 road miles from our Yukon, Oklahoma main office. The USDA soil survey maps Norwood soil across 53% of the city, where clay can cling to a reamer and slow a bore. A bore near FM 1093 needs route planning around the highway right of way as well as marked utilities.
Weston Lakes bores at a glance
- Incorporated city in Fort Bend County, Texas. Population 4,514 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 466 miles, about 9.4 hours of driving.
- Ground: Norwood soil is mapped on 53 percent of the area, with silt loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1093. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bessies Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Bessies Creek in Weston Lakes?
Weston Lakes is an incorporated small city in Fort Bend County, so its city streets belong to the city rather than the county. Weston Lakes’ Census Bureau Vintage 2024 estimate is 4,514, while our underground planning follows site conditions in Fort Bend County. We install water, sewer, gas, electric conduit and fiber along routes such as Weston Drive or Bowser Road, with the alignment set by the service point and existing lines.
Our main office is in Yukon, Oklahoma, and Weston Lakes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965 and has drilled directionally since 1982. From 3/4 inch service lines to 48 inch casing, that range can fit a service route on Weston Drive or a larger crossing near Bessies Creek.

What is Weston Lakes ground like to bore in Norwood soil?
The USDA soil survey maps Norwood soil across 53% of Weston Lakes and Brazoria soil across 24%. Norwood loam with 0 to 1 percent slopes covers 43%; Norwood silty clay loam with the same slope range covers 10%. At about 40 inches below the surface, silt loam is mapped under 43% of the area and clay under 28%. Surface texture is mapped as loam across 45% and clay across 29%. Norwood and Brazoria are mapped soil patterns, not test borings, so we confirm subsurface conditions before selecting a crossing. The clay share matters because sticky cuttings can build up on a reamer.
| USDA soil survey, inside the Weston Lakes city limits | What is mapped |
|---|---|
| Soil series mapped | Norwood 53 percent, Brazoria 24 percent, Alluvial land (miscellaneous area) 9 percent, Clemville 5 percent and Churnabog 4 percent |
| Texture at the surface | loam 45 percent, clay 29 percent and silty clay loam 11 percent |
| Texture about 40 inches down | silt loam 43 percent, clay 28 percent and loam 12 percent |
| Engineering class about 40 inches down | lean clay (CL) 56 percent and fat clay (CH) 39 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 31 percent of the area |
Bedrock is not mapped in the top five feet of Weston Lakes, which does not rule out deeper rock. The survey maps a seasonal water table within 60 inches across 5% of the area and flood prone soils across 6%, so low ground near Bessies Creek needs attention during pit planning. High steel corrosion risk is mapped across 31%, a consideration for steel casing and tracer wire that the line owner should weigh. Holocene alluvium along streams includes sand, silt, clay and gravel, so conditions can vary near the creek.
How do we drill Weston Lakes ground with silt loam?
Weston Lakes has mapped silt loam and clay at about 40 inches, so we adjust fluid and reaming to the ground instead of treating the whole route alike. Bessies Creek and the mapped wet areas also affect pit placement.
- In Norwood and Brazoria clay, we use a thinner fluid mix with polymer and open the hole in stages to limit sticky buildup on the reamer.
- Where silt loam is mapped under about 40 inches, we keep fluid pressure low near pavement and slabs so soft ground does not wash out.
- For wet ground near Bessies Creek, we plan smaller pits and pump water as needed; a creek route also needs depth planning below the channel.
- Before drilling near a marked line, we hydrovac pothole it; for example, a conduit route under Weston Drive needs the line exposed before the drill approaches.

What does a bore have to cross in Weston Lakes near FM 1093?
FM 1093 is the state highway mapped inside Weston Lakes, with 1.0 roadway mile in the city. The city has 28.06 public road centerline miles. Bowser Road is the longest named street at 2.91 miles, followed by Westerdale Drive at 2.44 miles and Weston Drive at 2.04 miles. Wellspring Lake Drive runs 1.69 miles. A route along these streets needs to be laid out against pavement, driveways and the service connection, so the bore can pass below surfaces that should stay intact.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1093 | State highway | 1 roadway miles inside | State highway office |
| Bessies Creek | Stream | 3.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brazos River | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Oxbow Lake | Lake or pond | 65 acres, inside | Checked for Corps of Engineers jurisdiction |
| Pecan Lake | Lake or pond | 7 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad runs inside Weston Lakes or within 1 mile outside its limits, and none is mapped crossing a street here. Bessies Creek runs 3.63 channel miles through the city, with 7 mapped street crossings of named streams. Oxbow Lake and Pecan Lake are also inside the limits. A creek route needs depth planning below the channel and a check for federal jurisdiction; a lake side route also needs its entry and exit pits kept on workable ground.
Who approves a Weston Lakes bore in Fort Bend County?
For work in FM 1093 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Houston District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that utility. At a crossing of FM 1093, electric and communication lines need 60 inches of cover below the lowest point of the grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. For FM 1093 crossings, TxDOT Houston District requires us to bore or tunnel beneath existing highway pavement. Weston Lakes city streets fall under the city, while Bessies Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Fort Bend County near Weston Lakes?
EPA drinking water records do not identify the provider for a specific Weston Lakes address. Confirm the water provider with the city, Fort Bend County or the local water district before a bore is planned. CenterPoint Energy reports electric service in Fort Bend County, but that does not establish the line owner at every address. We confirm the owner before planning an electric conduit bore near Bowser Road or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy | Electric utilities reporting service in Fort Bend County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median Weston Lakes housing year at 2006; 83% of homes were built in 2000 or later and 17% from 1960 to 1999. A replacement line on Westerdale Drive may need a different route from a new service to a newer home. We expose each marked utility on the bore path with hydrovac potholing before drilling near it, since locate paint shows position, not depth.

Where is Weston Lakes near Fulshear?
Weston Lakes covers 2.65 square miles in Fort Bend County, at an elevation of 106 feet, and its ZIP code is 77441. Simonton is 2.9 miles northwest, while Fulshear is 3.6 miles northeast and is the nearest larger city. Orchard is 4.4 miles southwest; Richmond, the county seat, is 11.5 miles southeast. The Yukon, Oklahoma main office is 466 road miles away, a 9.4 hour drive. That distance is part of planning a job on Bowser Road or near Bessies Creek, especially when equipment and crew time are part of the scope.
Places near Weston Lakes
- Directional boring in Simonton: 2.9 miles northwest
- Directional boring in Fulshear: 3.6 miles northeast
- Orchard: 4.4 miles southwest
- Directional boring in Wallis: 8.1 miles west
- Directional boring in Brookshire: 8.7 miles north
What would we bore along Bowser Road in Weston Lakes?
- Highway crossing: A bore under FM 1093 follows the TxDOT permit plan and passes beneath the highway pavement rather than cutting through it.
- Water service: A line reaching a Weston Drive address needs the route and provider checked before we set the bore path.
- Fiber conduit: A run along Bowser Road can carry conduit below pavement and driveways that would otherwise interrupt the route.
- Creek crossing: A Bessies Creek bore needs a planned depth below the channel and a jurisdiction check during planning.
- Lake side service: A route near Oxbow Lake needs entry and exit pits placed with the lake edge and access in mind.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Weston Lakes quote near Wellspring Lake Drive?
For a Weston Lakes quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. A Wellspring Lake Drive address helps us locate the route against nearby streets and the proposed connection point. Include whether the alignment approaches FM 1093 or a creek.
The main price question in Weston Lakes is the ground and crossing plan: Norwood and Brazoria soils include clay that can affect reaming and fluid control, while a Bessies Creek route adds channel planning. Length, pipe or conduit size, marked utilities to expose, pavement, pits and excavator time also shape the work. A route under FM 1093 has highway requirements to plan around. Mobilization matters too, since Weston Lakes is 466 road miles from Yukon.
Questions people ask about boring in Weston Lakes
Does Trinity take directional boring work in Fort Bend County near Weston Lakes?
Yes. We take directional boring work in Weston Lakes, and Trinity stays responsible from the first call through the bore log. Our own crews and partner drilling contractors vetted by Trinity staff the work, including routes near Bessies Creek. Send the location and scope so we can assess the route and required equipment.
Who approves a bore under FM 1093 in Weston Lakes?
The utility owner applies for the TxDOT permit when work occupies FM 1093 right of way, and the TxDOT Houston District reviews it. We prepare the bore plan and profile for the owner’s application. Highway cover requirements affect the planned depth, and the permit governs the work under the road.
Can you bore a line under Bessies Creek in Weston Lakes?
A line can be planned beneath Bessies Creek, subject to the route, ground and required review. The creek runs 3.63 channel miles through Weston Lakes, so the bore needs to stay below the channel. When planning a Bessies Creek crossing, we check whether the work falls under US Army Corps of Engineers jurisdiction.
Who owns electric lines in Fort Bend County near Weston Lakes, and who confirms conduit specs?
CenterPoint Energy reports electric service in Fort Bend County, but the owner of the line at a particular Weston Lakes address must be confirmed before a conduit bore. The line owner also confirms the conduit requirements. We check the proposed route, including any nearby Bowser Road crossing, against that information.
Does the city or county control Weston Drive in Weston Lakes, and must it be cut?
Weston Lakes is incorporated, so Weston Drive is a city street. A directional bore can pass below the street and leave its surface uncut, with pits placed off the pavement where the site allows. We still need the route and marked utility locations before setting the bore plan.
How old are buried lines near Westerdale Drive in Weston Lakes?
The American Community Survey 2019 to 2023 estimates give Weston Lakes a median housing year of 2006, with 83% of homes built in 2000 or later. Those figures do not date buried lines. A replacement bore near Westerdale Drive should be planned around the existing line and utilities exposed along the route.
Can I reach Trinity after hours about an urgent bore near Weston Drive in Weston Lakes?
Yes. Though Weston Lakes is 466 road miles from our Yukon main office, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Weston Drive, give us the location, what line is involved and what has happened so we can understand the site and response needed.
How much notice does Texas811 need for a bore on Bowser Road in Weston Lakes?
Paint on Bowser Road shows a utility’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For work affecting Bowser Road, if the start slips more than 14 days past the original notice, we make a new request. Along Westerdale Drive, we refresh worn or moved marks through Texas811 before work continues.
How do Norwood and Brazoria soil series affect the cost of directional boring near FM 1093 in Weston Lakes?
The route and ground are key factors: clay in mapped Norwood and Brazoria soils can change reaming, while an FM 1093 crossing brings highway planning. Length and pipe or conduit size, utilities to expose, pavement, creek crossings, pits and excavator time also affect the scope. The 466 road miles from Yukon affect mobilization.
Where the Weston Lakes facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Weston Lakes
- U.S. Census Bureau, TIGER/Line 2024: Weston Lakes boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Weston Lakes
- U.S. Census Bureau, American Community Survey 2019 to 2023: Weston Lakes housing units and year built
- Macrostrat geologic map compilation: map units under Weston Lakes
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fort Bend County
- U.S. Geological Survey, Elevation Point Query Service: Weston Lakes elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Weston Lakes
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Weston Lakes
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Weston Lakes, Texas
Type the address of your job in Weston Lakes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Weston Lakes
Same county: Sugar Land · Missouri City · Houston · Rosenberg · Mission Bend · Fresno · Cinco Ranch · Stafford · Pecan Grove · Richmond · Four Corners · Katy. All counties: Texas county list.
