trinityboringsolutions.com

Bigfoot Texas Directional Boring: Poth Soil, Texas State Highway 173, Siestedero Creek

Quick Answer: Bigfoot is an unincorporated community in Frio County, where county or state authorities own roads such as Andy Sadler Road; we use directional boring, also called horizontal directional drilling (HDD), for lines crossing beneath it. The mapped community is 519 road miles from our Yukon, Oklahoma main office, with Texas State Highway 173 as a major route. Poth soil covers 27 percent of mapped area, and loamy fine sand above clay can affect reaming along Siestedero Creek.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bigfoot bores at a glance

  • Unincorporated community in Frio County, Texas. Population 480 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 519 miles, about 10.1 hours of driving.
  • Ground: Poth soil is mapped on 27 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: Texas State Highway 173, FM 472, FM 3176 and FM 462. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Siestedero Creek, Smith Branch, Siestedero Branch Creek and Bear Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Siestedero Creek in Bigfoot?

Bigfoot is a census designated unincorporated community in Frio County, so streets such as Whitley Road are not owned by a city government; county or state authority applies according to the road. The Census Bureau counted 480 people in 2020, its count for this unincorporated place. We install water, sewer, gas, electric conduit and fiber where service routes need to pass beneath Whitley Road or Texas State Highway 173.

Our main office is in Yukon, Oklahoma, and Bigfoot work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle lines from 3/4 inch service lines to 48 inch casing. Our family business started in 1965 and has done directional boring since 1982, a range suited to short service bores and larger casing work around Bigfoot.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Bigfoot ground like to bore in Poth soil?

The USDA soil survey maps Poth soil across 27 percent of the mapped community, with Poth loamy fine sand on gentle slopes as the largest named map unit. Loamy fine sand accounts for 45 percent of the surface texture. At about 40 inches below the surface, clay is mapped under 30 percent of the area, sandy clay loam under 28 percent and sandy clay under 25 percent; average clay content at that depth is 37 percent. We treat mapped Poth, Antosa, Miguel, and Wilco soil patterns in Bigfoot as planning information, not test borings. Sandier upper soil may cut easily but can cave behind the bit, while clay lower down can cling to the reamer.

USDA soil survey, inside the Bigfoot mapped community boundaryWhat is mapped
Soil series mappedPoth 27 percent, Antosa 13 percent, Miguel 12 percent, Wilco 9 percent and Dilley 7 percent
Texture at the surfaceloamy fine sand 45 percent, very fine sandy loam 21 percent and loamy sand 13 percent
Texture about 40 inches downclay 30 percent, sandy clay loam 28 percent and sandy clay 25 percent
Engineering class about 40 inches downclayey sand (SC) 31 percent, fat clay (CH) 30 percent and lean clay (CL) 26 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches15 percent of the area (0 percent hard rock, 15 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel17 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 15 percent of Bigfoot, including 9 percent within 40 inches; hard bedrock is not mapped at that depth. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 5 percent of the area, relevant near Siestedero Creek. High steel corrosion risk is mapped under 17 percent. The geologic map identifies the Eocene Reklaw Formation, which includes sandstone and silty, lignitic clay; that change in material can affect drilling speed and steering.

How do we bore Bigfoot clay and Poth soil?

Poth loamy fine sand near the surface and clay at about 40 inches call for a bore plan that accounts for changing ground. At Siestedero Creek, we also plan the path and fluid use around the channel.

  1. On routes through Poth loamy fine sand, we use drilling fluid to support the hole and stage reaming so loose soil is less likely to fall in.
  2. Where clay appears around 40 inches, we adjust fluid and reaming to limit sticky buildup, then plan to pull the pipe after opening the hole.
  3. Near Siestedero Creek, we track the drill head from the surface and log depth and pitch to keep the path beneath the channel.
  4. At Texas State Highway 173, we pothole marked utilities before drilling near them and manage fluid pressure to reduce the risk of lifting pavement.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where might a Bigfoot bore pass under Andy Sadler Road?

Texas State Highway 173 runs 5.3 mapped roadway miles inside the Bigfoot community boundary. FM 472, FM 3176 and FM 462 also run through the community. Any utility route under an existing highway pavement is bored or tunneled rather than open cut. Andy Sadler Road is the longest named street at 4.47 miles, followed by Whitley Road at 3.03 miles and Cude Road at 1.81 miles. Those road lengths give a sense of where service routes may need to cross without cutting the surface.

CrossingTypeMapped extentWho has a say
Texas State Highway 173State highway5.3 roadway miles insideState highway office
FM 472State highway3.8 roadway miles insideState highway office
FM 3176State highway2.8 roadway miles insideState highway office
FM 462State highway2.6 roadway miles insideState highway office
Siestedero CreekStream3.27 channel miles insideChecked for Corps of Engineers jurisdiction
Smith BranchStream2.7 channel miles insideChecked for Corps of Engineers jurisdiction
Siestedero Branch CreekStream1.21 channel miles insideChecked for Corps of Engineers jurisdiction
Bear CreekStream1.15 channel miles insideChecked for Corps of Engineers jurisdiction
Elm CreekStream0.96 channel miles insideChecked for Corps of Engineers jurisdiction
Chacon CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Becerro CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Bigfoot community or within one mile outside it, so a local track crossing is not mapped. Siestedero Creek runs 3.27 channel miles inside the community, and six mapped street crossings cross named streams. Smith Branch, Siestedero Branch Creek, Bear Creek and Elm Creek are also mapped here. We see no lakes or ponds mapped within one mile of Bigfoot, while Siestedero Creek and Bear Creek are mapped within its limits. A creek route needs planning for channel depth and possible federal jurisdiction.

Who permits a Bigfoot bore in Frio County?

Bigfoot has no city government, so authority over streets rests with the county or state depending on the road. For work in the right of way of Texas State Highway 173 or a farm to market road, the utility owner files the TxDOT permit application in RULIS; we prepare the bore plan and profile for that filing. TxDOT’s San Antonio District reviews it. Electric and communication lines crossing a highway need 60 inches of cover below the lowest point of the grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. Siestedero Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving Bigfoot in Frio County?

EPA drinking water records do not identify the provider serving a specific Bigfoot address, and no system name matches the community. The water provider for the address must be confirmed with the county or local water district before planning a bore. AEP Texas Central, Karnes Electric Cooperative and Medina Electric Cooperative report electric service in Frio County. We confirm the line owner for the location before planning an electric conduit bore, since countywide reporting does not identify every address.

Line ownerWhat it isSourceSize
AEP Texas Central, Karnes Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in Frio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bigfoot’s median housing year at 1998; 3 percent of homes were built before 1960, 57 percent from 1960 to 1999 and 40 percent in 2000 or later. A replacement route near Whitley Road may encounter older buried lines alongside newer services. Before drilling near marked water or electric lines, our crews use hydrovac potholing to expose them; paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Bigfoot from Natalia and our Yukon yard?

Bigfoot is in Frio County, Texas, at an elevation of 609 feet, and covers 23.91 square miles. The community uses ZIP codes 78005 and 78016. Natalia is 8.5 miles north, Devine is 6.6 miles northwest, and Moore is 9.2 miles west. Pearsall, the county seat and nearest larger city, is 18.8 miles southwest. The Yukon, Oklahoma yard is 519 road miles away, a 10.1 hour drive. That distance is part of planning mobilization for work on Texas State Highway 173 or the roads around Bigfoot.

Places near Bigfoot

Which jobs call for a bore near Whitley Road in Bigfoot?

  • Highway crossing: A utility route under Texas State Highway 173 needs a bored path beneath the pavement and its travel lanes.
  • Water service: A new service near Whitley Road can pass below the road surface without an open cut across it.
  • Fiber conduit: A conduit route along Andy Sadler Road can use a bore to avoid cutting the road and driveway surfaces.
  • Creek crossing: A route beneath Siestedero Creek needs depth planning and a check for federal jurisdiction.
  • Drainage crossing: The mapped drainage around Bigfoot calls for a path that accounts for local channels and surface flow.
  • Utility replacement: A replacement line near FM 472 can pass marked utilities after crews expose them by hydrovac potholing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Bigfoot work near Texas State Highway 173?

For a Bigfoot quote near Whitley Road or Texas State Highway 173, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. The route matters because the community has both highway right of way and named creeks to account for.

The job details set the price: length, pipe size, ground conditions, crossings, pavement, pits and equipment time all matter. Poth soil can shift from loamy fine sand to clay, affecting reaming and fluid control. A crossing beneath Texas State Highway 173 brings permit and cover requirements, while a route at Siestedero Creek adds channel planning. Bigfoot’s 519 road miles from Yukon also affect crew mobilization.

Questions people ask about boring in Bigfoot

Does Trinity take directional boring jobs in Bigfoot and Frio County?

Yes. We take directional boring work along Texas State Highway 173 in Bigfoot and across Texas. Our crews handle the work, and partner contractor crews may work from satellite yards; Trinity stays the point of contact through the bore log. For a route near Texas State Highway 173, the utility owner handles any required highway permit.

How old are buried lines near Whitley Road in Bigfoot?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1998, with 3 percent of homes built before 1960 and 40 percent built in 2000 or later. That mix can mean both replacement work and new service routes near Whitley Road. For boring work near Andy Sadler Road in Bigfoot, we expose marked utilities before drilling close to them.

What is Poth soil like for a bore in Bigfoot?

The USDA soil survey maps Poth soil across 27 percent of Bigfoot, with loamy fine sand common at the surface. At about 40 inches, clay is mapped under 30 percent of the area and sandy clay loam under 28 percent. Loose upper soil can cave, while clay can cling to the reamer.

Will a Bigfoot bore encounter bedrock?

The soil survey maps weathered bedrock within five feet across 15 percent of Bigfoot, and within 40 inches across 9 percent. Hard bedrock is not mapped within 60 inches. A bore near the Reklaw Formation may still encounter changing sandstone or clay, so the mapped depth does not rule out deeper rock.

Who approves a Bigfoot bore under Texas State Highway 173?

TxDOT reviews highway utility permits through its San Antonio District. The utility owner submits the application in RULIS, and we provide the bore plan and profile. For Texas State Highway 173, the permit sets the requirements for the specific crossing, including cover depth and installation conditions.

Can a line be bored under Siestedero Creek in Bigfoot?

A bore can be planned beneath Siestedero Creek, which runs 3.27 channel miles inside the community. The route must account for channel depth, soil conditions and possible U.S. Army Corps of Engineers jurisdiction. We assess those factors during planning rather than assuming every creek crossing has the same requirements.

Does Bigfoot’s distance from Pearsall change a bore from Yukon?

Pearsall is 18.8 miles southwest of Bigfoot, while our Yukon, Oklahoma main office is 519 road miles away. That distance can affect crew mobilization and scheduling for work near Pearsall or along Texas State Highway 173. The route, equipment and site conditions also shape the mobilization plan.

How much notice does Texas811 need for a Bigfoot bore near Andy Sadler Road?

For a bore near Andy Sadler Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. For work near Texas State Highway 173, if the start slips more than 14 days past the original notice, we make a new request. When marks along FM 472 wear off or move, we refresh them through Texas811 before boring work continues in Bigfoot.

What affects the cost of a Bigfoot bore under Texas State Highway 173?

The route and scope determine the price, including length, pipe size, soil, pavement, utility crossings, pits and equipment time. A crossing under Texas State Highway 173 brings highway planning and cover requirements. Clay beneath Poth loamy fine sand can affect drilling, while distance from the Yukon yard affects mobilization.

Where the Bigfoot facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bigfoot

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bigfoot, Texas

Type the address of your job in Bigfoot. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bigfoot

Same county: Dilley · North Pearsall · Hilltop. All counties: Texas county list.