Tiki Island Texas Directional Boring: Basford Loam, Interstate 45 and BNSF Railway
Quick Answer: At Tiki Island, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes near Interstate 45 and the island’s named streets. The Yukon main office is 501 road miles away, a factor to weigh for work near Tiki Drive. The USDA soil survey maps Basford loam over 37 percent of the town, with fine sandy loam at about 40 inches that can loosen around a reamer. The geologic map identifies Holocene Alluvium beneath the Tiki Island area, with sand, silt and clay deposits to plan around.
Tiki Island bores at a glance
- Incorporated city in Galveston County, Texas. Population 1,120 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 501 miles, about 9.8 hours of driving.
- Ground: Basford soil is mapped on 37 percent of the area, with fine sandy loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 45 and US 75. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Tiki Island, Galveston County?
Trinity Boring Solutions takes directional boring work in Tiki Island, an incorporated town in Galveston County with 1,120 residents in the Census Bureau Vintage 2024 estimate. Along Tiki Drive, Bora Bora Drive or Paradise Drive, our crews can install water, sewer, gas, electric conduit and fiber routes by HDD, with the line and crossing plan set for the address.
Our main office is in Yukon, Oklahoma, and Tiki Island work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982 while planning for crossings in Tiki Island. With CenterPoint Energy, Entergy Texas and Texas-New Mexico Power reporting service in Galveston County, our record of no utility strike in over 25 years reflects the care needed around existing lines.

What kind of ground does Tiki Island’s Basford soil map show?
The USDA soil survey maps Basford soil across 37 percent of Tiki Island, with the mapped unit described as Basford loam. Urban land covers 32 percent, and the survey also maps Maggies very fine sandy loam. At about 40 inches below the surface, fine sandy loam is mapped under 37 percent of the area, while sandy clay loam is mapped under 9 percent. Average clay content at that depth is 19 percent, and heavy clay is mapped under 6 percent. These are mapped soil patterns, not test borings, so a site bore still needs its own plan.
| USDA soil survey, inside the Tiki Island city limits | What is mapped |
|---|---|
| Soil series mapped | Basford 37 percent, Urban land (miscellaneous area) 32 percent, Maggies 9 percent and Amarada 6 percent |
| Texture at the surface | loam 43 percent, material 32 percent and very fine sandy loam 9 percent |
| Texture about 40 inches down | fine sandy loam 37 percent, material 32 percent and sandy clay loam 9 percent |
| Average clay content about 40 inches down | 19 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 52 percent of the area |
| Flood prone soils | 52 percent of the area |
| High corrosion risk for uncoated steel | 52 percent of the area |
| Mapped as urban land (disturbed fill) | 32 percent of the area |
In Tiki Island, bedrock is not mapped within the top five feet, but rock may still occur deeper along a bore path. Seasonal water table conditions are mapped within 40 inches under 52 percent of the area, and flood prone soils also cover 52 percent. Pits may need pumping, and wet material can move into an open hole. High steel corrosion risk is mapped under 52 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil concern. The geologic map shows Holocene Alluvium, deposits of sand, silt and clay that can vary along the route.
How do we drill Tiki Island’s fine sandy loam?
Tiki Island’s mapped Basford loam and fine sandy loam call for a bore plan that accounts for changing ground and shallow water. We locate and expose marked lines before the drill approaches them.
- Basford loam and fine sandy loam are mapped around Tiki Island, so we stage reaming and have the pipe ready before opening ground that may loosen around the bore.
- With seasonal water table conditions mapped under 52 percent of Tiki Island, we keep pits small where practical and plan to manage water at the work area.
- Before drilling near a marked line along Tiki Drive, we hydrovac pothole it to see its depth; surface paint alone does not show how deep it sits.
- We track the drill head from the surface and record depth and pitch along a Paradise Drive route, adjusting the plan as the ground and clearances require.

What is in the way of a new line in Tiki Island near BNSF Railway?
Interstate 45 and US 75 each have 0.1 mapped roadway miles inside Tiki Island, and Texas State Highway 6 is 1.4 miles outside the town limits. Highway right of way can change the bore plan and permit path. Tiki Drive is the longest named street at 1.62 miles, followed by Bora Bora Drive at 0.56 miles and Paradise Drive at 0.33 miles. A route on one of these streets still needs utility locates and an alignment that fits the actual site.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 45 | Interstate | 0.1 roadway miles inside | State highway office |
| US 75 | US highway | 0.1 roadway miles inside | State highway office |
| Texas State Highway 6 | Highway nearby | 1.4 miles outside | State highway office |
| BNSF Railway | Railroad nearby | 0.1 miles outside | The railroad |
| Union Pacific | Railroad nearby | 0.1 miles outside | The railroad |
| West Bay | Lake or pond | 5,656 acres, inside | Checked for Corps of Engineers jurisdiction |
| Jones Bay | Lake or pond | 1,331 acres, inside | Checked for Corps of Engineers jurisdiction |
| Galveston Bay | Lake or pond | 5 acres, inside | Checked for Corps of Engineers jurisdiction |
BNSF Railway and Union Pacific tracks are each 0.1 miles outside Tiki Island’s limits, with no railroad mapped inside town. No street and rail crossing is mapped inside the limits, but a proposed route to either track still needs review. Tiki Island has West Bay, Jones Bay and Galveston Bay within its limits, plus 0.7 miles of unnamed drainage. No streams or street crossings of named streams are mapped inside town. A bay or lake crossing needs a check for federal water jurisdiction during planning.
Do I need a permit to bore under Interstate 45 in Tiki Island?
Interstate 45 and US 75 are state and federal highways, so work in their right of way goes through TxDOT, not the Tiki Island street process. Texas State Highway 6 is also under state control just outside town. The TxDOT Houston District reviews a utility permit application in its RULIS system, filed by the owner of the line; we prepare the bore plan and profile for that filing and work under the owner’s permit. City streets such as Tiki Drive belong to the incorporated town. A bore under BNSF Railway or Union Pacific track needs an agreement with that railroad, which sets crossing conditions. A bay or lake route is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in Tiki Island, Galveston County?
EPA drinking water records do not tie a water system to Tiki Island, so the provider for the specific Tiki Drive or Paradise Drive address has to be confirmed with the town, Galveston County or the local water district before planning a bore. CenterPoint Energy, Entergy Texas and Texas-New Mexico Power report electric service in the county, but that does not identify the provider at every address. We confirm the line owner before planning an electric conduit route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy, Entergy Texas and Texas-New Mexico Power | Electric utilities reporting service in Galveston County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Tiki Island’s median housing year at 1993; 71 percent of housing was built from 1960 to 1999 and 29 percent in 2000 or later. A route along Tiki Drive may involve replacement work or a new service, but the address and plans decide. Before drilling near marked water or electric lines, we hydrovac pothole them to expose their depth; paint shows position, not depth.

What is near Tiki Island and Bayou Vista?
Tiki Island is an incorporated town in Galveston County, with 0.48 square miles of land, an elevation of 5 feet and ZIP code 77554. Bayou Vista is 2.4 miles northwest, and Hitchcock is 5.7 miles west. Galveston, the county seat, is 8.3 miles south; Hitchcock is the nearest larger city listed, 5.7 miles west. The Yukon yard is 501 road miles away, a 9.8 hour drive. Those distances matter when setting a schedule and accounting for mobilization to a Tiki Drive or Paradise Drive job.
Places near Tiki Island
- Directional boring in Bayou Vista: 2.4 miles northwest
- Directional boring in Hitchcock: 5.7 miles west
- Directional boring in La Marque: 6.9 miles northwest
- Directional boring in Galveston: 8.3 miles south
- Directional boring in Jamaica Beach: 8.3 miles southwest
What boring work comes up in Tiki Island near Paradise Drive?
- Water service: A new service near Tiki Drive needs a route checked against existing lines, with the water provider confirmed for that address.
- Electric conduit: Near Paradise Drive, we confirm the electric line owner before planning a conduit bore because county reporting does not identify every address.
- Fiber route: A fiber bore along Bora Bora Drive can be planned around the street and any marked utilities exposed along the proposed path.
- Highway crossing: A route beneath Interstate 45 needs a TxDOT permit path through the utility owner and review by the Houston District.
- Rail crossing: A bore approaching BNSF Railway or Union Pacific track needs the owning railroad’s agreement and its crossing conditions.
- Drainage crossing: At an unnamed drainage route or near West Bay, we plan the alignment and check for U.S. Army Corps of Engineers jurisdiction.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for directional boring near Tiki Drive in Tiki Island?
For a Tiki Drive or Paradise Drive quote, give us the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help show nearby streets, drainage and marked utilities. Those details let us review the route and identify what information is still needed before we set the bore plan.
The 501 road miles from Yukon affect mobilization to Tiki Island, while Basford loam and shallow seasonal water can affect drilling and pit work. Interstate 45 or US 75 right of way, nearby BNSF Railway or Union Pacific tracks, and marked utilities all add crossing and exposure work to a route. Pipe size, footage, pavement, pits, sand backfill, excavator time and emergency timing also shape the job. We review the whole route, not just its length.
Questions people ask about boring in Tiki Island
Does Trinity Boring Solutions take directional boring work in Tiki Island, Galveston County?
Yes. We take directional boring work in Tiki Island and serve Texas from our Yukon main office, using our own crews and vetted partner drilling contractors. Work near Tiki Drive is handled through Trinity from the first call to the bore log, regardless of which crew is on site.
Does Basford soil in Tiki Island corrode steel pipe, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk under 52 percent of Tiki Island, including mapped Basford areas. The line owner should weigh that risk for steel casing or tracer wire and choose any protective coating. HDPE is not affected by soil corrosion, but the right pipe depends on the line and project requirements.
What ground does a bore go through in Tiki Island’s Basford soil?
The USDA soil survey maps Basford loam under 37 percent of Tiki Island. At about 40 inches, fine sandy loam is mapped under 37 percent and sandy clay loam under 9 percent, with average clay content of 19 percent. These are map patterns, not site borings, so the ground along a Tiki Drive route can still need field checking.
Could a directional bore in Tiki Island encounter rock below the mapped top five feet?
Bedrock is not mapped in Tiki Island’s top five feet, but that does not rule out deeper rock. The geologic map identifies Holocene Alluvium, with sand, silt and clay deposits. A route near West Bay still needs a site specific plan because mapped geology does not establish the exact conditions at a bore location.
Who approves a bore under Interstate 45 in Tiki Island?
For Interstate 45 right of way, TxDOT reviews the utility owner’s permit application through the TxDOT Houston District. The utility owner files in RULIS, and we prepare the bore plan and profile for its application. Tiki Island streets such as Paradise Drive follow a different process from state highway right of way.
What does a Tiki Island bore under BNSF Railway need?
A crossing under BNSF Railway needs an agreement with BNSF, the railroad owner identified near Tiki Island. On a Tiki Island crossing, we follow the agreement’s conditions for casing, depth and flagging. Union Pacific track is also near town, so the owner of the specific track must be established before planning that route.
Does Trinity serve Bayou Vista and rural sites near Tiki Island?
Yes. We take work around Bayou Vista, 2.4 miles northwest of Tiki Island, as well as rural sites outside the town limits. Routes there still need an address or map pin, a utility plan and a review of nearby roads or drainage so the bore can be scoped for that location.
How much Texas811 notice does a bore near Tiki Drive in Tiki Island need?
The person arranging excavation for a Tiki Drive bore must contact Texas811 at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If the start slips more than 14 days past the notice, make a new request. For work in Tiki Island, we refresh worn or moved marks through Texas811 before continuing.
What affects the cost of directional boring near Interstate 45 in Tiki Island?
The route, length and pipe or conduit size all matter. At Tiki Island, Basford ground and shallow seasonal water can affect drilling and pits, while an Interstate 45 permit crossing or a nearby railroad crossing can add planning and exposure work. Pavement, drainage, excavator time, backfill, emergency timing and the 501 road mile trip from Yukon also shape the scope.
Where the Tiki Island facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Tiki Island
- U.S. Census Bureau, TIGER/Line 2024: Tiki Island boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Tiki Island
- U.S. Census Bureau, American Community Survey 2019 to 2023: Tiki Island housing units and year built
- Macrostrat geologic map compilation: map units under Tiki Island
- U.S. Department of Transportation, North American Rail Network: track owners in Galveston County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Galveston County
- U.S. Geological Survey, Elevation Point Query Service: Tiki Island elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Tiki Island
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Tiki Island
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Tiki Island, Texas
Type the address of your job in Tiki Island. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Tiki Island
Same county: League City · Texas City · Friendswood · Dickinson · Santa Fe · Bacliff · San Leon · Kemah · Bolivar Peninsula · Clear Lake Shores. All counties: Texas county list.
