trinityboringsolutions.com

Navasota Texas Directional Boring: Wilson Clay, Cedar Creek and Union Pacific

Quick Answer: What lies beneath Cedar Creek routes in Navasota? Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), in Texas for lines that need to pass under Cedar Creek. From our Yukon, Oklahoma main office, the route is 407 road miles, and Union Pacific tracks are another local crossing to plan around. At about 40 inches, clay is mapped under 68 percent of Navasota. That sticky ground can load a reamer, so we manage fluid and open the hole in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Navasota bores at a glance

  • Incorporated city in Grimes County and Brazos County, Texas. Population 9,471 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 407 miles, about 7.8 hours of driving.
  • Ground: Wilson soil is mapped on 17 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: Texas State Highway 6, Texas State Highway 105, Texas State Highway 6 Business, FM 3090 and FM 379. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: Union Pacific and BNSF Railway, with 26 mapped street and rail crossings.
  • Named streams inside the boundary: Cedar Creek, Sandy Creek and Navasota River.
  • Public water: City of Navasota, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Union Pacific in Navasota?

What does the top five feet look like around Navasota lines? The USDA soil survey maps Wilson clay loam, and clay is common below the surface. Navasota is primarily in Grimes County and has a population of 9,471, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines along routes such as La Salle Street, Texas State Highway 6 and Union Pacific crossings.

Our main office is in Yukon, Oklahoma, and Navasota work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short 3/4 inch service line near Washington Avenue and a long route needing 48 inch casing are within our 10 feet to 5,000 feet bore range. Our family business started in 1965, and we have done directional boring since 1982, including work across Texas.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Wilson soil affect a bore in Navasota?

The USDA soil survey maps Wilson and Mabank soils across Navasota, each at 17 percent of the mapped area. Wilson clay loam with 0 to 1 percent slopes covers 16 percent, while Chazos loamy fine sand covers 15 percent. At about 40 inches below the surface, clay is mapped under 68 percent of the area, and the average clay content there is 41 percent. We use mapped soil patterns around Navasota as planning context, not as test borings that confirm conditions at a proposed route. Sticky clay can build on a reamer and grip pipe, so the bore plan needs to account for the ground along the exact route.

USDA soil survey, inside the Navasota city limitsWhat is mapped
Soil series mappedWilson 17 percent, Mabank 17 percent, Chazos 15 percent, Crockett 10 percent and Burleson 9 percent
Texture at the surfacefine sandy loam 33 percent, clay loam 23 percent and clay 21 percent
Texture about 40 inches downclay 68 percent, sandy clay loam 17 percent and clay loam 5 percent
Engineering class about 40 inches downlean clay (CL) 52 percent and fat clay (CH) 44 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches3 percent of the area (1 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches8 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel70 percent of the area

Bedrock is mapped within 60 inches on 3 percent of Navasota, and typical bedrock depth is 27 inches, so a route needs site specific checking. Seasonal water tables are mapped within 60 inches on 8 percent, and flood prone soils on 4 percent; pits near Cedar Creek may need water management and a channel depth plan. High steel corrosion risk is mapped across 70 percent, which matters for steel casing and tracer wire. The geologic map shows alluvial clay, silt, sand, and gravel of Pleistocene age, a mix that can change along a bore.

What does it take to bore through clay in Navasota?

Navasota soil maps show substantial clay, including Wilson clay loam. We match fluid, reaming and timing to the route, then track the drill head as it advances beneath streets or Cedar Creek.

  1. In Wilson clay loam, we use a fluid mix suited to sticky ground and ream in stages to limit clay buildup on the tooling.
  2. With clay mapped under 68 percent of Navasota at about 40 inches, we watch fluid returns and adjust pressure to avoid lifting pavement.
  3. At Cedar Creek, we plan bore depth beneath the channel and check for U.S. Army Corps of Engineers jurisdiction during planning.
  4. Before drilling near any marked line, we hydrovac pothole it; a Washington Avenue route needs this check because paint does not show depth.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under Cedar Creek in Navasota?

Texas State Highway 6 has 10.6 mapped roadway miles inside Navasota, and Texas State Highway 105 has 6.8. Texas State Highway 6 Business, FM 3090 and FM 379 are also inside the limits. Washington Avenue runs 3.74 miles in the city, La Salle Street 2.75 miles, and FM 379 1.33 miles. A bore route under these roads needs to account for pavement and access. For an existing highway, the state rules call for boring or tunneling beneath the pavement rather than open trenching.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway10.6 roadway miles insideState highway office
Texas State Highway 105State highway6.8 roadway miles insideState highway office
Texas State Highway 6 BusinessState highway3.2 roadway miles insideState highway office
FM 3090State highway2.6 roadway miles insideState highway office
FM 379State highway1.5 roadway miles insideState highway office
FM 515State highway0.9 roadway miles insideState highway office
FM 1227State highway0.7 roadway miles insideState highway office
Texas State Highway 90State highway0.4 roadway miles insideState highway office
Union PacificRailroad5.84 track miles insideThe railroad
BNSF RailwayRailroad2.12 track miles insideThe railroad
Cedar CreekStream3.64 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy CreekStream0.62 channel miles insideChecked for Corps of Engineers jurisdiction
Navasota RiverStream0.58 channel miles insideChecked for Corps of Engineers jurisdiction
Turkey CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 5.84 track miles in Navasota, and BNSF Railway has 2.12. Public records map 26 street and rail crossings in the city, so a proposed route may need to account for an existing track. Cedar Creek runs 3.64 channel miles inside the limits; Sandy Creek and the Navasota River are also mapped. The city has 12 mapped street crossings of named streams. A creek route needs a depth plan and a jurisdiction check during planning.

Whose permission does a Navasota bore under Texas State Highway 6 need?

For a bore in the Texas State Highway 6 right of way, the line owner files the utility permit through TxDOT’s online RULIS system, not the drilling contractor. We prepare the bore plan and profile for the owner’s application, then work under the permit issued to that owner. The TxDOT Bryan District reviews Navasota work. Cover depends on the line: electric and communication lines need 60 inches at a crossing, water lines 60 inches, and pressurized sewer lines 60 inches. TxDOT rules require a bore or tunnel beneath existing highway pavement. A Union Pacific or BNSF Railway crossing needs an agreement with that railroad, and Cedar Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Grimes County near Navasota?

The City of Navasota public water system uses groundwater wells and reports 3,854 service connections serving 8,068 people. For electric service in Grimes County, utilities reporting to the EIA include Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore, since those county reports do not identify the provider at every Navasota property.

Line ownerWhat it isSourceSize
City of NavasotaPublic water systemGroundwater wells3,854 connections, 8,068 people served
Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric CooperativeElectric utilities reporting service in Grimes County and Brazos CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We read Navasota’s median housing year as 1983 in the American Community Survey 2019 to 2023 five year estimates, not as subsurface data. The survey estimates 23 percent of housing was built before 1960, 57 percent from 1960 to 1999, and 20 percent in 2000 or later. A replacement route near La Salle Street may meet older lines, while newer development can call for service extensions. Before drilling near a marked utility, we expose it with hydrovac potholing; paint shows position, not depth. For example, a proposed line under Washington Avenue needs its marked utilities exposed before the drill approaches.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What is near Navasota and College Station?

Navasota is primarily in Grimes County, with a small part in Brazos County, and sits at an elevation of 213 feet across 8.35 square miles. The city’s ZIP code is 77868. Anderson, the county seat, is 9.2 miles northeast; Pinebrook is 13.8 miles east, and Plantersville is 14.0 miles east. College Station is 18.4 miles northwest. Our Yukon, Oklahoma main office is 407 road miles away, a 7.8 hour drive, so distance can affect mobilization for work on Texas State Highway 105 or Cedar Creek.

Places near Navasota

What kinds of bores come up near Washington Avenue in Navasota?

  • Highway crossing: A route beneath Texas State Highway 6 uses boring or tunneling under existing pavement, with the utility owner handling the permit filing.
  • Water service: A connection to the City of Navasota groundwater system may follow a route near La Salle Street after the line owner and existing utilities are confirmed.
  • Fiber route: A conduit run along Washington Avenue can be planned to pass below the roadway without cutting its pavement.
  • Creek crossing: A line beneath Cedar Creek needs a channel depth plan and a jurisdiction check during planning.
  • Rail crossing: A route beneath Union Pacific or BNSF Railway track needs an agreement with the railroad that owns that track.
  • Street service: A bore near FM 379 can carry water, sewer, gas, electric conduit or fiber while avoiding an open cut across the road.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Navasota quote near Union Pacific?

Send an address or map pin first; the exact spot matters where a route meets Cedar Creek or the Union Pacific tracks. For work in Navasota, we need you to tell us what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us trace the route and identify crossings around Texas State Highway 6.

We set the price from the Navasota job details, including the installation scope and what the work requires. The 407 road miles from Yukon affect mobilization, while Wilson clay can change the reaming plan. A route crossing Union Pacific track or Cedar Creek adds crossing work. Pipe size, bore length, utilities to expose, pavement, pits and excavator time also matter. Sand backfill and emergency timing can change the scope. A map pin near Washington Avenue helps us see which site conditions to account for before preparing the quote.

Questions people ask about boring in Navasota

Does Trinity Boring Solutions take directional boring jobs in Grimes County near Navasota?

Yes. We take directional boring work in Navasota and across Texas, with each job planned around its own route and scope. Our own crews and partner drilling contractors Trinity has vetted support the work from satellite yards, while our main office stays in Yukon, Oklahoma. You deal with Trinity through the bore log, whether a route runs near Cedar Creek or La Salle Street.

How old are Navasota homes and buried lines around La Salle Street?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1983, with 23 percent of homes built before 1960. That age can mean a replacement bore near La Salle Street has to account for older utilities, while newer properties may need service extensions. Before we drill near marked lines in Navasota, we expose them so their locations are clear along the planned work area.

Can Wilson soil in Navasota corrode steel, and what pipe should I use?

The soil survey maps high steel corrosion risk across 70 percent of Navasota, including areas with Wilson clay loam. The line owner should weigh that risk when choosing steel casing or tracer wire protection. HDPE is not subject to the same soil corrosion concern, but the line owner selects the materials for a route near Cedar Creek.

What ground does a bore pass through in Navasota near Wilson soil?

Wilson and Mabank soils each cover 17 percent of the mapped area. About 40 inches down, clay is mapped under 68 percent of Navasota, while sandy clay loam is mapped under 17 percent. These USDA soil survey patterns are not test borings. Along a route near Washington Avenue, clay can stick to the reamer and grip pipe.

Will a directional bore in Navasota hit rock, since conditions along the planned route determine what we encounter?

It depends on the route. Bedrock is mapped within 60 inches on 3 percent of Navasota, and the geologic map shows Pleistocene alluvial clay, silt, sand, and gravel. That map does not rule out rock deeper down. A bore near Cedar Creek needs route specific assessment rather than assuming the whole area has the same ground.

Who approves a Navasota bore under Texas State Highway 6?

The line owner submits the TxDOT utility permit through RULIS, and the TxDOT Bryan District reviews it. We prepare the bore plan and profile for the owner’s filing. The permit sets the required cover for the line crossing Texas State Highway 6, and existing highway pavement is bored or tunneled beneath.

Can I reach Trinity after hours for an urgent bore near FM 379 in Navasota?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, and we can discuss directional boring work in Navasota. Tell us where the work is, such as a route near FM 379, what line needs to go in, and whether a road, utility or creek affects access. We also provide 24 hour emergency response.

How much notice does Texas811 need for a Navasota bore near Washington Avenue?

For a Washington Avenue bore, Texas law requires a locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. When a Navasota start moves more than 14 days past the original notice, we ask you to make a new request. If marks are worn or moved in Navasota, we have them refreshed through Texas811 before we continue work.

What affects the cost of directional boring in Navasota under Texas State Highway 6?

The route and scope determine the price. Length, pipe size, Wilson clay, pavement, utility exposures and the Texas State Highway 6 crossing all affect the work. Cedar Creek or Union Pacific crossings can add planning and field steps. Distance from the Yukon yard also matters for mobilization, along with pits, excavator time and emergency timing.

Where the Navasota facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Navasota

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Navasota, Texas

Type the address of your job in Navasota. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Navasota

Same county: Bedias · Iola · Todd Mission · Shiro. All counties: Texas county list.