Plantersville Texas Directional Boring: Depcor Soil, FM 1774 And Hurricane Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Plantersville along FM 1774 and its Union Pacific track. Plantersville is 422 road miles from our Yukon, Oklahoma main office, so Windmill Lane work is staffed by our own crews and vetted drilling partners. Depcor soil is common here, and its sandy surface over clayier ground can make an open bore sticky. We adjust the drilling fluid and ream in stages to manage that ground.
Plantersville bores at a glance
- Incorporated city in Grimes County, Texas. Population 519 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 422 miles, about 8.1 hours of driving.
- Ground: Depcor soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1774 and Texas State Highway 105. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: Union Pacific and BNSF Railway, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Hurricane Creek and Mill Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near the Union Pacific in Plantersville?
We take directional boring work in Plantersville, Grimes County, where the Census Bureau Vintage 2024 estimate puts the population at 519. Along FM 1774 or Windmill Lane, we can install water, sewer, gas, electric conduit or fiber by bore, with the route set to the address and existing lines. Our crews handle the drilling, and Trinity stays your contact through the bore log.
Our main office is in Yukon, Oklahoma, and Plantersville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle runs from 3/4 inch service lines to 48 inch casing, including a small service bore off Windmill Lane or a large casing run near FM 1774. Our family business started in 1965, and we have done directional boring since 1982; we bring that experience to planning work in Plantersville.

What ground should you expect in Plantersville near Depcor soil?
The USDA soil survey maps Depcor as 32 percent of Plantersville, with Depcor loamy fine sand on 31 percent of the mapped area. Loamy fine sand makes up 60 percent of the mapped surface texture, but about 40 inches down the largest listed texture share is sandy clay loam at 32 percent. Clay is mapped at that depth across 30 percent of the area. We treat Plantersville’s mapped soil patterns as route planning context, not as test borings for underground work. The sandy surface may cut readily, while the clayier layer can cling to the reamer and grip the pipe.
| USDA soil survey, inside the Plantersville city limits | What is mapped |
|---|---|
| Soil series mapped | Depcor 32 percent, Fetzer 20 percent, Annona 15 percent, Frelsburg 10 percent and Brenham 6 percent |
| Texture at the surface | loamy fine sand 60 percent, fine sandy loam 16 percent and clay 12 percent |
| Texture about 40 inches down | sandy clay loam 32 percent, clay 30 percent and clay loam 21 percent |
| Engineering class about 40 inches down | fat clay (CH) 52 percent, lean clay (CL) 42 percent and silty sand (SM) 3 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 79 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 97 percent of the area |
Bedrock is not mapped within the top five feet across Plantersville, though the geologic map shows Alluvial Sand, Silt, And Clay and the Pliocene Willis Formation. Those mapped units include clay, silt and sand, so the deeper route still needs field judgment. Seasonal water tables are mapped within 60 inches across 79 percent of the area, so pits may need pumping. Flood prone soils cover 3 percent, including possible creek concerns near Hurricane Creek. High steel corrosion risk covers 97 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that steel concern.
How do we plan directional boring through Plantersville’s sandy clay loam when setting a crossing depth?
Plantersville’s loamy fine sand surface and sandy clay loam lower down call for a bore plan that accounts for both easy cutting and sticky returns. We adjust fluid and reaming to the ground along FM 1774 or Windmill Lane.
- Depcor loamy fine sand can cut easily and fall in behind the bit, so we use drilling fluid to support the hole and stage the reaming before a line goes in.
- Clay is mapped at about 40 inches down across 30 percent of Plantersville; thinner fluid and polymer help limit sticky reamer buildup on a route near FM 1774.
- Seasonal water tables occur within 60 inches across 79 percent of the mapped area, so pits for a Windmill Lane bore may need pumping and careful sizing.
- Before drilling near a marked utility along Post Office Road, we hydrovac pothole to verify its depth, then track the head and log depth and pitch.

What might a bore cross near Hurricane Creek in Plantersville?
FM 1774 and Texas State Highway 105 run through Plantersville, so a route crossing either state road needs planning for the right of way and pavement. FM 1774 is the longest named street, with 4.49 miles in the city. Windmill Lane runs 0.54 miles, and Post Office Road runs 0.44 miles. Those streets may also have driveways and buried services along a route. A bore can pass beneath pavement without cutting across it, but the route and pits still have to fit the particular property and road limits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1774 | State highway | 7.3 roadway miles inside | State highway office |
| Texas State Highway 105 | State highway | 4.2 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.93 track miles inside | The railroad |
| BNSF Railway | Railroad | 0.42 track miles inside | The railroad |
| Hurricane Creek | Stream | 0.38 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mill Creek | Stream | 0.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sand Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Kickapoo Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.93 track miles inside Plantersville, and BNSF Railway has 0.42. Three mapped street and rail crossings make track ownership a key route detail; a Union Pacific or BNSF crossing requires an agreement from that railroad, with its terms controlling the installation. Hurricane Creek runs 0.38 channel miles in the city, while Mill Creek runs 0.13. Three mapped street crossings intersect named streams, so a creek route needs a depth plan and a jurisdiction check. We have no lakes or ponds mapped within one mile of Plantersville, a detail we consider when planning underground routes.
Who signs off on a bore by FM 1774 in Plantersville?
Plantersville’s city streets, including Windmill Lane and Post Office Road, belong to the city; FM 1774 and Texas State Highway 105 are state highways. For work in either highway right of way, the line owner, not the driller, applies through TxDOT’s RULIS system. TxDOT’s Bryan District reviews the request, and we prepare the bore plan and profile for the owner’s application. At highway crossings, electric and communication lines need 60 inches of cover below the lowest crossed grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. TxDOT rules call for boring or tunneling beneath existing highway pavement, with the bore extending below all travel lanes on rural highways.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines in Plantersville and Grimes County?
The water provider for an address on FM 1774 or near Hurricane Creek must be confirmed with the city, Grimes County or the local water district before a bore is planned. Public records do not tie a named water system to Plantersville, so the address needs checking before the route is set. Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Grimes County. We confirm the electric line owner for the specific address before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative | Electric utilities reporting service in Grimes County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimates of Plantersville’s median housing year, 2002, as context when planning underground work. The estimates show 2 percent of homes built before 1960, 46 percent built from 1960 to 1999, and 52 percent built in 2000 or later. That mix means a Windmill Lane project could involve either replacement work or a newer service route. Before drilling near marked lines, we hydrovac pothole them to find their depth; paint alone does not show how deep a utility sits.

Do you cover Plantersville and nearby Pinebrook?
Plantersville is an incorporated city in Grimes County, with 1.98 square miles of land and an elevation of 340 feet. We use ZIP code 77363 to identify Plantersville service inquiries and organize underground work planning. Pinebrook is 1.7 miles southwest, and Todd Mission is 5.5 miles south. Magnolia, the nearest larger city, is 11.1 miles southeast; Anderson, the county seat, is 12.9 miles northwest. From our Yukon, Oklahoma main office, the drive is 422 road miles and 8.1 hours. That distance is part of planning crew mobilization for a Windmill Lane or FM 1774 project.
Places near Plantersville
- Directional boring in Pinebrook: 1.7 miles southwest
- Directional boring in Todd Mission: 5.5 miles south
- Directional boring in Montgomery: 10.6 miles east
- Directional boring in Magnolia: 11.1 miles southeast
- Directional boring in Anderson: 12.9 miles northwest
What kinds of bores come up around Plantersville’s Windmill Lane?
- Highway crossing: A bore beneath FM 1774 keeps the route below the paved roadway, with the line owner’s TxDOT permit covering the right of way.
- Water service: A service bore near Windmill Lane needs the provider confirmed for the address before we plan the connection.
- Fiber route: A conduit bore along Post Office Road can avoid cutting pavement, but marked lines on the route need potholing first.
- Creek crossing: A Hurricane Creek bore needs a route deep enough to pass below the channel, with jurisdiction checked during planning.
- Rail crossing: A route beneath the Union Pacific Navasota Subdivision needs the railroad’s crossing agreement and its specified conditions.
- Sewer line: A bore near Texas State Highway 105 can install a sewer line without an open cut across the road pavement.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Plantersville quote near Union Pacific?
Start with an address or map pin, especially if the route is near FM 1774, Windmill Lane or Hurricane Creek. The exact spot shows which road, track or drainage feature the bore may meet. To plan underground work in Plantersville, we need to know what will go in the ground, the pipe or conduit size, and the footage. A route sketch or plans help us check the alignment and likely access.
A short service route on Windmill Lane with clear access is simpler to plan than a long crossing beneath FM 1774 or Union Pacific track. Length, pipe size, soil conditions and the number of utilities to expose all affect the work. Concrete or pavement, creek crossings at Hurricane Creek, pit size, excavator time and sand backfill can add steps. Mobilization from Yukon also matters at 422 road miles. High profile or emergency work can change the planning and crew needs.
Questions people ask about boring in Plantersville
Does Trinity take directional boring jobs in Plantersville and Grimes County?
Yes. We take jobs in Plantersville, and our own crews and vetted drilling partners staff work from our Yukon office and partner yards. You work with Trinity from the first call through the bore log, whether the route is on Windmill Lane or near FM 1774.
Could groundwater or flooding near Hurricane Creek affect a Plantersville bore pit?
It can affect pit planning. The USDA soil survey maps seasonal water tables within 60 inches across 79 percent of Plantersville, so a pit near Hurricane Creek may need pumping. Flood prone soils cover 3 percent of the mapped area, and creek crossings need a depth plan and jurisdiction check.
Does Depcor soil in Plantersville create a steel corrosion concern, and what pipe can go in?
The USDA soil survey maps high steel corrosion risk across 97 percent of Plantersville. The line owner should consider casing and tracer wire materials for a route near FM 1774. HDPE does not carry the same soil corrosion concern, while the line owner decides which materials and coatings suit the installation.
What ground is under Depcor soil in Plantersville around 40 inches down?
The USDA soil survey maps sandy clay loam across 32 percent of Plantersville at about 40 inches, with clay across 30 percent. Depcor is the largest named soil series at 32 percent. Those are mapped patterns, not test borings, so a bore near Windmill Lane still needs to be managed for actual drilling conditions.
Will a bore in Plantersville hit rock near Hurricane Creek?
Bedrock is not mapped in Plantersville’s top five feet, but that does not rule out deeper rock. The geologic map shows Alluvial Sand, Silt, And Clay and the Pliocene Willis Formation, with clay, silt and sand. A route near Hurricane Creek still needs field checks as drilling proceeds.
Who approves a bore under FM 1774 in Plantersville, and which TxDOT office reviews it?
The line owner applies for work in the FM 1774 right of way through TxDOT’s RULIS system, and TxDOT’s Bryan District reviews it. We provide the bore plan and profile for that owner. Work under Texas State Highway 105 follows the same state highway permit process.
How far is Plantersville from the Yukon office, and does nearby Magnolia change the job?
Plantersville is 422 road miles and an 8.1 hour drive from our Yukon, Oklahoma main office. Magnolia is 11.1 miles southeast, but it does not change the route requirements at a Plantersville site. The distance from Yukon can affect mobilization for work near FM 1774 or Windmill Lane.
How early should I call Texas811 for a Plantersville bore near FM 1774?
The locate request must be made at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For a bore near FM 1774, marks that wear off or move must be refreshed through Texas811 before work continues. A new request is needed if the start slips more than 14 days past the original notice.
What affects the cost of directional boring near FM 1774 in Plantersville when we plan the crossing route?
The route length, pipe or conduit size, Depcor soil conditions and the number of utilities to expose all affect the scope. Pavement or concrete, a Hurricane Creek crossing, pits, excavator time and sand backfill can add work. A Union Pacific crossing and the 422 road miles from Yukon can also affect planning and mobilization.
Where the Plantersville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Plantersville
- U.S. Census Bureau, TIGER/Line 2024: Plantersville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Plantersville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Plantersville housing units and year built
- Macrostrat geologic map compilation: map units under Plantersville
- U.S. Department of Transportation, North American Rail Network: track owners in Grimes County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grimes County
- U.S. Geological Survey, Elevation Point Query Service: Plantersville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Plantersville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Plantersville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Plantersville, Texas
Type the address of your job in Plantersville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
