trinityboringsolutions.com

Todd Mission Texas Directional Boring: Conroe Soil, FM 1774 and Mill Creek

Quick Answer: Can we get your line under FM 1774, Union Pacific track or Mill Creek without cutting across it? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Todd Mission, Texas. The Yukon main office is 427 road miles away, and Mill Creek Drive is one local route a bore may need to cross. Conroe soil is common here, with clay at depth that can cling to the reamer. We adjust the drilling fluid and reaming plan to suit it.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Todd Mission bores at a glance

  • Incorporated city in Grimes County, Texas. Population 131 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 427 miles, about 8.3 hours of driving.
  • Ground: Conroe soil is mapped on 42 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1774. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Mill Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call to bore under Mill Creek in Todd Mission?

Can we get your line under Mill Creek or a road in Todd Mission without cutting across it? Yes. We install water, sewer, gas, electric conduit and fiber, routing each line beneath the streets, track or creek that lies in its path. The Census Bureau Vintage 2024 estimate puts Todd Mission at 131 people, all in Grimes County. That small city still has 16.17 public road centerline miles to plan around.

Our main office is in Yukon, Oklahoma, and Todd Mission work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and we have done directional boring since 1982; near FM 1774, we plan crossings around site conditions. Our range runs from 3/4 inch service lines to 48 inch casing, a fit for the streets and crossings around Mill Creek.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Conroe soil affect drilling in Todd Mission?

The USDA soil survey maps Conroe as the largest soil series in Todd Mission, covering 42 percent of the city. Conroe loamy fine sand and Conroe gravelly loamy fine sand are mapped across much of the surface, but conditions change below it. At about 40 inches, the survey maps clay across 42 percent of the area and sandy clay loam across 24 percent. Those are mapped patterns, not test borings. Clay can stick to the reamer and grip pipe, so we plan staged reaming and a pull soon after opening the hole.

USDA soil survey, inside the Todd Mission city limitsWhat is mapped
Soil series mappedConroe 42 percent, Depcor 24 percent, Nahatche 12 percent, Fetzer 11 percent and Splendora 4 percent
Texture at the surfaceloamy fine sand 59 percent, gravelly loamy fine sand 21 percent and clay loam 12 percent
Texture about 40 inches downclay 42 percent, sandy clay loam 24 percent and stratified loam to silty clay loam 12 percent
Engineering class about 40 inches downclayey sand (SC) 42 percent, lean clay (CL) 40 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches96 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel96 percent of the area

Bedrock is not mapped in the top five feet of Todd Mission, which does not rule out rock deeper down. The USDA survey maps a seasonal water table within 40 inches across 96 percent of the area, so pits may need pumping and wet ground calls for care. Flood prone soils cover 12 percent, including Nahatche clay loam. High steel corrosion risk is mapped across 96 percent in Todd Mission, so we account for exposure when planning local bores. The Willis Formation, of Cenozoic age, includes sand, gravel, silt and clay, so the route still needs checking as drilling advances.

How do we bore through Todd Mission clay near FM 1774 while adjusting our crossing plan to the ground conditions?

In Todd Mission, Conroe soil and mapped clay at depth call for a bore plan that manages sticky cuttings and changing ground. We expose marked utilities before the drill approaches them, then track the head as it advances.

  1. At Conroe soil locations, we use a thinner drilling fluid with polymer and ream in stages so sticky clay cuttings do not build up on the tool.
  2. Where the loamy fine sand mapped in Todd Mission may cave behind the bit, we build a supporting fluid wall and have the pipe ready before the final ream.
  3. Because the USDA survey maps a seasonal water table within 40 inches across 96 percent of the city, we keep pits small and pump water when needed.
  4. At a Mill Creek route, we plan to stay below the channel, check for Corps jurisdiction and track the drill head while logging depth and pitch.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a Todd Mission line go under Union Pacific track?

FM 1774 is the state highway mapped inside Todd Mission, with 1.2 roadway miles in the city. A line crossing that route needs a bore plan that fits the highway right of way and its pavement. Among the local streets, FM 1774 is the longest at 1.23 miles, followed by Greenbriar Drive at 1.19 miles and Mill Creek Drive at 0.65 miles. Oakwood Drive adds another named route where access and nearby utilities can shape the bore path.

CrossingTypeMapped extentWho has a say
FM 1774State highway1.2 roadway miles insideState highway office
Union PacificRailroad1.24 track miles insideThe railroad
Mill CreekStream1.17 channel miles insideChecked for Corps of Engineers jurisdiction
Birch CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.24 track miles inside Todd Mission on the Navasota Subdivision, and three street and rail crossings are mapped in the city. A bore beneath that track needs an agreement from Union Pacific, which sets crossing conditions such as casing, depth and flagging. Mill Creek runs 1.17 channel miles inside the limits, while Birch Creek lies 0.1 miles outside them. No street crossing of a named stream is mapped, but a proposed creek route still needs planning for the channel.

Whose approval does a Todd Mission bore need in Grimes County?

FM 1774 is a Texas state highway, so work in its right of way needs a TxDOT utility permit. The TxDOT Bryan District reviews the application in RULIS, and the utility owner, not Trinity, submits it. We prepare the bore plan and profile and work under the permit issued to that owner. A crossing of Union Pacific track needs an agreement from the railroad. Mill Creek crossing plans are checked for U.S. Army Corps of Engineers jurisdiction. Because Todd Mission is incorporated, we coordinate city street crossings with the city before boring beneath its streets.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Todd Mission and Grimes County?

The water provider for a specific address in Todd Mission has to be confirmed with the city, the county or the local water district before a bore is planned. The available EPA records do not match a provider to this address, so we do not assume who serves it. EIA reporting names Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative for Grimes County. The owner of an electric line near Mill Creek Drive must be identified before we plan a conduit bore.

Line ownerWhat it isSourceSize
Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric CooperativeElectric utilities reporting service in Grimes CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Todd Mission’s median housing year is 1992 in the American Community Survey 2019 to 2023 five year estimates; we still base boring plans on site conditions. It estimates 26 percent of homes were built before 1960, 63 percent from 1960 to 1999 and 11 percent in 2000 or later. That mix can mean replacement lines as well as new services along FM 1774 and Oakwood Drive. We hydrovac pothole marked utilities on the route before drilling near them, since locate marks show position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Todd Mission from Plantersville and other nearby places?

Todd Mission is in Grimes County, at an elevation of 286 feet, and covers 1.98 square miles. We use ZIP code 77363 to identify Todd Mission in service area discussions about directional boring locations. Plantersville is 5.5 miles north, while Pinebrook is 4.5 miles northwest. Magnolia, the nearest larger city, is 6.2 miles southeast; Anderson, the county seat, is 18.3 miles northwest. From the Yukon, Oklahoma main office, the drive is 427 road miles and 8.3 hours. That distance is part of planning mobilization for a bore along FM 1774 or Mill Creek Drive.

Places near Todd Mission

What boring work comes up along Mill Creek Drive in Todd Mission?

  • Highway crossing: A bore beneath FM 1774 keeps the existing pavement uncut, with the route and right of way considered in the plan.
  • Water service: A line near Mill Creek Drive starts with confirmation of the address provider and the route past marked utilities.
  • Fiber conduit: Oakwood Drive can need a conduit route beneath pavement, with marked lines exposed before the drill approaches them.
  • Creek crossing: A proposed route under Mill Creek is planned around its channel, with jurisdiction checked during planning.
  • Rail crossing: A line beneath Union Pacific track needs the railroad’s agreement and a plan that follows its crossing conditions.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Todd Mission bore near FM 1774?

For a quote near FM 1774, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Tell us if the route crosses Union Pacific track or Mill Creek. Those details help us lay out the bore and identify what needs review before work is scheduled.

The job details determine the price. Ground conditions such as Conroe soil and clay at depth affect drilling and reaming. Crossings of FM 1774, Union Pacific track or Mill Creek can add planning, exposure and permit needs. Pipe size, bore length, pavement, pits, excavator time and sand backfill also matter. The Yukon office is 427 road miles away, so mobilization is part of the estimate. High profile or emergency work can change the scope as well.

Questions people ask about boring in Todd Mission

Does Trinity take directional boring jobs in Todd Mission and Grimes County, and who does the work?

Yes. We take directional boring work in Todd Mission, and Trinity stays responsible from the first call through the bore log. Our own crews and partner drilling contractors Trinity has vetted handle the field work. We can plan a route under FM 1774, a street or Mill Creek based on the job details.

Who approves a bore under FM 1774 in Todd Mission, and which TxDOT office reviews it?

TxDOT approves work in the FM 1774 right of way, and the TxDOT Bryan District reviews the utility owner’s RULIS application. The utility owner files; we prepare the bore plan and profile and work under its permit. A proposed crossing also has to fit the highway requirements for cover and installation.

What does a Todd Mission bore under Union Pacific track require for casing, depth, flagging and crossing coordination?

A bore under the Union Pacific Navasota Subdivision needs an agreement from the railroad. For a Union Pacific track crossing, that agreement sets conditions for casing, depth and flagging before we plan directional boring. Since 1.24 track miles are mapped inside Todd Mission, we need the proposed route and line details to plan the crossing.

Can you bore a line beneath Mill Creek in Todd Mission?

Yes, a bore can be planned beneath Mill Creek without cutting across its channel. The creek runs 1.17 channel miles inside Todd Mission, so the route and depth must account for the channel. We also check the crossing for U.S. Army Corps of Engineers jurisdiction during planning.

Which electric companies report service in Grimes County near Todd Mission, and who confirms conduit specs?

Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Grimes County. Those reports do not identify the line owner at every Todd Mission address. The utility that owns the line must be confirmed before a conduit bore near FM 1774 is planned.

Who controls Mill Creek Drive in Todd Mission, and can a line go under it without cutting the street?

Because Todd Mission is incorporated, we account for city ownership when planning bores beneath its streets. A line can be bored beneath Mill Creek Drive to avoid cutting the street surface, subject to the route and approvals that apply. We expose marked utilities along the path before drilling near them.

What bore sizes and lengths can Trinity handle near Oakwood Drive in Todd Mission?

Our work ranges from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near Oakwood Drive, the line size, footage, ground and crossings help determine the drilling plan. A sketch can clarify the alignment.

How much notice does Texas811 need before a bore near FM 1774 in Todd Mission?

Count back at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as at least two working days. For a bore near FM 1774, make the request no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request, and refresh worn or moved marks through Texas811 before work continues.

What affects directional boring cost near FM 1774 in Todd Mission, including route conditions and crossing requirements?

The job scope sets the price, not one factor alone. Conroe soil and clay affect ground conditions; a crossing of FM 1774, Union Pacific track or Mill Creek affects planning. Pipe size, footage, pavement, pits, excavator time, backfill and the 427 road miles from Yukon also shape the estimate.

Where the Todd Mission facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Todd Mission

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Todd Mission, Texas

Type the address of your job in Todd Mission. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Todd Mission

Same county: Navasota · Bedias · Iola · Anderson · Richards · Shiro. All counties: Texas county list.