trinityboringsolutions.com

Petersburg Texas Directional Boring: Pullman Clay Loam, FM 789 and FM 54

Quick Answer: Petersburg is a small incorporated city, so 1st Street is city owned; Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work beneath it. Our Yukon, Oklahoma main office is 334 road miles away, and FM 789 can shape mobilization and permit planning. Pullman soil covers 91 percent of mapped area, with clay loam at 40 inches that can grip a reamer and pipe. On 2nd Street, staged reaming helps manage that sticky ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Petersburg bores at a glance

  • Incorporated city in Hale County, Texas. Population 971 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 334 miles, about 6.8 hours of driving.
  • Ground: Pullman soil is mapped on 91 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 789 and FM 54. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Petersburg, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Petersburg, Hale County?

Petersburg is a small incorporated city in Hale County, so its streets belong to the city rather than the county. The Census Bureau Vintage 2024 estimate places Petersburg at 971 residents, a scale we keep in mind when planning underground work in Hale County. Along 1st Street, 2nd Street or a service route off FM 54, we install water, sewer, gas, electric conduit and fiber by directional boring, with the route and line owner checked before drilling.

Our main office is in Yukon, Oklahoma, and Petersburg work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a roughly 4,100 foot, 48 inch casing bore under the Arkansas River in Tulsa, Oklahoma. A Petersburg bore along FM 789 is more likely to involve a service line or conduit, with Pullman clay loam and the route shaping the drilling plan. Trinity is a family business started in 1965, with directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does Pullman soil mean for a Petersburg bore?

The USDA soil survey maps Pullman soil across 91 percent of Petersburg, chiefly as Pullman clay loam on 0 to 1 percent slopes. Estacado loam accounts for 4 percent of the mapped area. At 40 inches, clay loam is mapped across 98 percent, with an average clay content of 39 percent; sandy ground is not mapped at that depth. Pullman and Estacado soil maps guide our early planning, but we do not treat mapped patterns as test borings. For a route near FM 789, expect sticky cuttings that can ball on the reamer and hold the pipe as it is pulled in.

USDA soil survey, inside the Petersburg city limitsWhat is mapped
Soil series mappedPullman 91 percent and Estacado 6 percent
Texture at the surfaceclay loam 92 percent and loam 7 percent
Texture about 40 inches downclay loam 98 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is not mapped in the top five feet around Petersburg, though that does not rule out deeper rock. The USDA soil survey maps seasonal water within 60 inches across 1 percent of the area, so pits may need pumping after wet weather. In Hale County, flood prone soils are not mapped, but we still check site conditions before planning a bore. High steel corrosion risk covers 99 percent of the mapped area, which makes the line owner’s material choices relevant for casing and tracer wire; HDPE avoids that steel concern. The Blackwater Draw Formation is Cenozoic sand, silt and fine alluvium, and the map also lists Cenozoic sedimentary rocks of Paleocene age.

How do crews handle Petersburg clay loam?

Pullman clay loam dominates the mapped ground in Petersburg. We plan the bore around sticky cuttings and the risk of clay gripping pipe, rather than treating the soil map as a site test.

  1. With Pullman clay loam covering 91 percent of Petersburg, we use thinner drilling fluid and ream in stages to limit clay buildup on the tools.
  2. The mapped clay content at 40 inches is 39 percent, so we watch returns and keep fluid pressure controlled near pavement such as 1st Street.
  3. Clay can grip the pipe, so we plan the final ream and pullback together for a 2nd Street route rather than leave the hole open.
  4. For marked utilities near the City of Petersburg water system or a confirmed electric line, we pothole to check depth before the drill approaches.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads can a Petersburg bore cross near 1st Street?

FM 789 runs 1.6 mapped roadway miles inside Petersburg, and FM 54 runs 0.9 miles. Both are state highways, so a route under either one needs TxDOT right of way planning. The city’s public street centerlines total 20.8 miles. 1st Street is the longest named street at 1.79 miles, followed by 2nd Street at 1.7 miles and Main Street at 1.18 miles. Those streets give a route plan specific endpoints and access points without requiring the pavement to be opened for a bore.

CrossingTypeMapped extentWho has a say
FM 789State highway1.6 roadway miles insideState highway office
FM 54State highway0.9 roadway miles insideState highway office
Swipe the table sideways to see every column.

Railroad tracks are not mapped inside Petersburg or within one mile outside its limits, so no track crossing is identified in the mapped area. No mapped street and rail crossings appear inside the city. Streams are not mapped inside the limits or within one mile, and no street crossing of a named stream is mapped. No lakes or ponds are mapped within one mile of Petersburg, so we can focus crossing reviews on Main Street and other project routes. A planned route along 1st Street still needs a site check for actual obstacles before the bore path is set.

Who approves a Petersburg bore in Hale County?

Petersburg’s city streets, including Main Street, belong to the city, while work within FM 789 or FM 54 right of way needs a TxDOT utility permit. For an electric or communication crossing, the cover baseline is 60 inches below the lowest crossed grade; along the right of way it is 48 inches. Water needs 60 inches at a crossing and 36 inches alongside, while pressurized sewer needs 60 inches at a crossing. The utility owner files through TxDOT’s RULIS system, the TxDOT Lubbock District reviews it, and we prepare the bore plan and profile for the owner’s application. Existing highway pavement is bored or tunneled, with crossings encased and the rural bore extending beneath all travel lanes. No railroad or stream crossing is mapped in Petersburg.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Petersburg?

The City of Petersburg public water system draws from groundwater wells and has 450 service connections serving 1,205 people. That makes water lines a key locate item along a planned route near the city system. Electric service reported in Hale County includes Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of PetersburgPublic water systemGroundwater wells450 connections, 1,205 people served
Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hale CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Petersburg’s median housing year at 1959; 54 percent of homes were built before 1960, 43 percent from 1960 to 1999 and 3 percent in 2000 or later. A replacement route near 2nd Street may meet older buried lines, while a new service has a different connection point. We use hydrovac potholing to expose marked utilities on the planned path, including lines associated with the City of Petersburg water system or a confirmed electric provider.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What places are near Petersburg and Lorenzo?

Petersburg is in Hale County at an elevation of 3,255 feet and covers 0.81 square miles. ZIP code 79250 identifies Petersburg within Hale County as we organize underground work around the service area. Lorenzo is 14.3 miles south, Abernathy is 14.9 miles west, and Idalou is 15.2 miles south. Plainview, the county seat and nearest larger city, is 23.3 miles north. From our Yukon, Oklahoma yard, Petersburg is 334 road miles away, a 6.8 hour drive. That distance is part of planning a crew move for work on FM 789 or a city street.

Places near Petersburg

What boring work may come up near Petersburg 2nd Street?

  • Highway crossing: A bore under FM 789 needs a route profile, cover planning and coordination with the utility owner for the TxDOT permit.
  • Water service: A connection near the City of Petersburg system calls for locating existing groundwater well supply lines before the new route is drilled.
  • Fiber route: A conduit run along 1st Street can pass beneath pavement, with marked utilities exposed before the drill reaches them.
  • Street replacement: A service crossing near 2nd Street can avoid opening the street surface while tying a new line into an older property.
  • Electric conduit: A route near Main Street starts with confirming which Hale County reporting utility owns the line at that address.
  • FM 54 crossing: A bore under this state highway needs the utility owner’s TxDOT application and a profile suited to its right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Petersburg bore near FM 789?

For a Petersburg quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help show the route near FM 789 or a city street. We use that scope to assess the bore path, access for equipment and the crossings that need to be exposed before drilling.

The 334 road miles from Yukon affect mobilization for a Petersburg job. Pullman clay loam also matters because sticky cuttings can call for staged reaming and careful fluid control. A crossing of FM 789 adds highway permit planning, while pavement, marked utilities, concrete, pits and sand backfill can change the work. Pipe size, bore length, excavator time and any high profile or emergency schedule also shape the price.

Questions people ask about boring in Petersburg

Does Trinity Boring Solutions take directional boring work in Petersburg, Hale County?

Yes. Across Texas, we provide directional boring in Petersburg, with FM 54 serving as a local highway reference for route planning. Our crews are staffed through our Yukon main office and vetted partner contractor yards, not a Petersburg office. For a route under 1st Street or near FM 789, you deal with Trinity through the bore log, whichever crew is on site.

Who runs Petersburg’s water system, and where does its water come from?

The City of Petersburg owns its public water system, and groundwater wells make utility coordination on 1st Street part of our boring planning. Public records list 450 service connections serving 1,205 people. For work near those water lines, we locate and expose marked utilities along the proposed route before drilling.

Who owns electric lines in Hale County near Petersburg, and who confirms conduit specs?

Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative report electric service in Hale County. Those records do not assign a provider to every Petersburg address. We confirm the specific line owner before planning a conduit bore near FM 54 or another route.

Does the city or county control Main Street in Petersburg, and must it be cut?

Petersburg is incorporated, so Main Street is a city street, not a county road. A directional bore can pass beneath its pavement without an open cut, subject to the site route and utility locations. We pothole marked lines before drilling near the planned crossing.

Do older homes along 2nd Street in Petersburg mean older buried lines?

The American Community Survey estimates a median housing year of 1959 in Petersburg, with 54 percent of homes built before 1960. That does not establish the age of a particular line, but replacement work near 2nd Street should account for existing utilities and expose marked lines before crossing them.

Does Pullman soil in Petersburg corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Petersburg. Pullman clay loam is the dominant mapped soil, but the line owner chooses the appropriate material and any coating for steel casing or tracer wire. HDPE is not subject to the mapped steel corrosion concern.

How far is Petersburg from Yukon, and does Plainview change the job plan?

Petersburg is 334 road miles and a 6.8 hour drive from our Yukon, Oklahoma yard. Plainview is 23.3 miles north and is the county seat, but it does not change the route requirements in Petersburg. The Yukon distance can affect crew mobilization for a bore on FM 789.

How much 811 notice is needed for a Petersburg bore along 1st Street?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. Describe the planned path along 1st Street. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a Petersburg directional bore near FM 789?

The scope sets the price: length, pipe or conduit size, Pullman clay loam, utility crossings, pavement, pits and equipment time all matter. A route under FM 789 also needs state highway permit planning. The 334 road miles from Yukon affect mobilization, and emergency timing or a complex profile can add work.

Where the Petersburg facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Petersburg

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Petersburg, Texas

Type the address of your job in Petersburg. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Petersburg

Same county: Seth Ward · Hale Center · Edmonson. All counties: Texas county list.