trinityboringsolutions.com

Santa Rosa Texas Directional Boring: Raymondville Clay, Highway 107, La Feria Main Canal

Quick Answer: Texas State Highway 107 and the Rio Valley Switching Company track are key obstacles; we take directional boring, also called horizontal directional drilling (HDD), jobs in Santa Rosa, Texas. Santa Rosa is 701 road miles from our Yukon, Oklahoma, main office, so Parker Road work needs mobilization planned. Raymondville clay loam is common, and clay at about 40 inches can cling to the reamer and grip pipe. Staged reaming helps manage that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Santa Rosa bores at a glance

  • Incorporated city in Cameron County, Texas. Population 2,366 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 701 miles, about 13.8 hours of driving.
  • Ground: Raymondville soil is mapped on 70 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 107 and FM 506. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: Rio Valley Switching Company, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: La Feria Main Canal.
  • Public water: City of Santa Rosa, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near the Rio Valley Switching Company in Santa Rosa?

Texas State Highway 107 and the Rio Valley Switching Company track are local features to plan around. Trinity Boring Solutions takes directional boring work in Santa Rosa, Cameron County, where the Census Bureau Vintage 2024 estimate puts the population at 2,366. We install water, sewer, gas, electric conduit and fiber, routing a replacement line along 13th Street or a service toward the City of Santa Rosa water system as the job requires.

Our main office is in Yukon, Oklahoma, and Santa Rosa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a Santa Rosa run near the La Feria Main Canal, our equipment range covers 3/4 inch service lines through 48 inch casing.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Raymondville soil in Santa Rosa?

The USDA soil survey maps Raymondville soil series across 70 percent of Santa Rosa, Hidalgo across 25 percent and Racombes across 5 percent. Raymondville clay loam makes up 37 percent of the mapped area, with Raymondville Urban land complex at 32 percent. At about 40 inches below the surface, the survey maps clay across 70 percent and clay loam across 25 percent; sandy clay loam accounts for 5 percent. The mapped soil is classified as CL at that depth. These are mapped patterns, not test borings, so the bore route still needs site planning.

USDA soil survey, inside the Santa Rosa city limitsWhat is mapped
Soil series mappedRaymondville 70 percent, Hidalgo 25 percent and Racombes 5 percent
Texture at the surfaceclay loam 70 percent and sandy clay loam 30 percent
Texture about 40 inches downclay 70 percent, clay loam 25 percent and sandy clay loam 5 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches7 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel75 percent of the area

The USDA soil survey maps no bedrock within 60 inches, so rock is not mapped in the top five feet. The geologic map shows Pleistocene Beaumont Formation flood plain deposits, described as mud veneer over meander belt sand; that does not establish what a drill will meet at every depth. Seasonal water table is mapped within 60 inches across 7 percent of the area, with none mapped within 40 inches. In Santa Rosa, we cannot use mapped flood prone soils to guide boring because those soils are not mapped. High steel corrosion risk covers 75 percent, so the line owner should consider steel casing and tracer wire materials; HDPE avoids that steel corrosion concern.

How do we drill Santa Rosa clay near Parker Road?

Raymondville clay loam and clay mapped at about 40 inches call for controlled fluid and staged reaming. At a Santa Rosa site, we confirm the route and expose marked utilities before the drill approaches them.

  1. Raymondville soil is mapped as clay loam, with clay at about 40 inches; we use thinner drilling fluid and staged reaming to limit sticky buildup.
  2. Clay can grip the pipe and pack onto a reamer, so near Parker Road we plan to pull pipe the same day the opened hole is ready.
  3. Before the drill approaches a marked line along 13th Street, we hydrovac pothole it because locate paint does not show its depth.
  4. We track the drill head from the surface and log depth and pitch as a bore advances near the La Feria Main Canal.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Parker Road in Santa Rosa?

Texas State Highway 107 runs 2.2 roadway miles inside Santa Rosa, and FM 506 adds 0.4 miles. A bore beneath either route needs its own access and depth plan. Parker Road is the longest named street at 1.71 miles in town; Santa Cruz Avenue and 13th Street each run 1.03 miles. Santa Rosa Boulevard runs 0.92 miles. These streets give a route to assess for pavement, driveways and buried lines, with pits placed in dirt rather than cutting the surface where the bore design allows.

CrossingTypeMapped extentWho has a say
Texas State Highway 107State highway2.2 roadway miles insideState highway office
FM 506State highway0.4 roadway miles insideState highway office
Rio Valley Switching CompanyRailroad0.83 track miles insideThe railroad
La Feria Main CanalStream0.45 channel miles insideChecked for Corps of Engineers jurisdiction
La Feria MainStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Rio Valley Switching Company owns 0.83 track miles inside Santa Rosa, and public mapping shows 3 street and rail crossings. A track route needs the railroad’s crossing agreement before design details are set. La Feria Main Canal runs 0.45 channel miles in town, and 3 mapped street crossings cross named streams. La Feria Main is 0.2 miles from the town limits. No lakes or ponds are mapped within one mile, so there is no mapped lake crossing to plan around.

Do I need a permit to bore under Texas State Highway 107 in Santa Rosa?

Texas State Highway 107 and FM 506 are state routes, so work in their right of way needs a TxDOT utility permit. The TxDOT Pharr District reviews the application. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that utility. TxDOT rules require a bore or tunnel beneath existing highway pavement, with the crossing extending beneath all travel lanes on rural highways. For the Rio Valley Switching Company track, the railroad owner must agree to the crossing, and TxDOT asks for a copy if highway right of way is also involved. A La Feria Main Canal crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Santa Rosa and Cameron County?

The City of Santa Rosa public water system uses surface water and reports 787 service connections serving 2,883 people. For an electric conduit bore near Parker Road, AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative are utilities reporting service in Cameron County. We confirm the line owner for the specific location before planning a conduit route; the county list does not identify the provider at every Santa Rosa address.

Line ownerWhat it isSourceSize
City of Santa RosaPublic water systemSurface water787 connections, 2,883 people served
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric CooperativeElectric utilities reporting service in Cameron CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put the median housing year in Santa Rosa at 1989. Santa Rosa’s survey estimates 2 percent of homes were built before 1960, 76 percent from 1960 to 1999 and 22 percent in 2000 or later, context we consider for underground work. A replacement bore along Santa Cruz Avenue may need to meet older buried lines, while a newer service can follow a different route. Before drilling near either, we hydrovac pothole marked utilities; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Do you cover Santa Rosa and nearby Ratamosa?

Santa Rosa is an incorporated town in Cameron County, at an elevation of 50 feet and covering 0.77 square miles. ZIP code 78593 serves the town. Tierra Bonita is 1.2 miles north, Ratamosa is 4.1 miles south, Yznaga is 5.0 miles north, Primera is 5.1 miles southeast and La Feria North is 5.3 miles south. Primera is the nearest larger city; Brownsville, the county seat, is 29.4 miles southeast. From our Yukon, Oklahoma, main office, Santa Rosa is 701 road miles away and a 13.8 hour drive, which can affect mobilization for a Parker Road job.

Places near Santa Rosa

  • Tierra Bonita: 1.2 miles north
  • Ratamosa: 4.1 miles south
  • Yznaga: 5 miles north
  • Directional boring in Primera: 5.1 miles southeast
  • La Feria North: 5.3 miles south

What would we bore near the La Feria Main Canal in Santa Rosa?

  • Highway crossing: A route under Texas State Highway 107 needs a bore plan for pavement and all travel lanes on rural highway crossings.
  • Water service: A connection near the City of Santa Rosa water system needs a route checked against existing lines before drilling.
  • Fiber conduit: A run along Santa Cruz Avenue can avoid open cuts in pavement, with marked utilities exposed before the drill nears them.
  • Rail crossing: A bore beneath the Rio Valley Switching Company track needs the railroad owner’s agreement and crossing conditions in the plan.
  • Canal crossing: A route under La Feria Main Canal needs depth planned for the channel and a jurisdiction check during planning.
  • Street replacement: A sewer or water line near 13th Street can be bored below the street rather than cut across its surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Santa Rosa Boulevard bore quote?

Send a map pin or address on Santa Rosa Boulevard so we can see the exact route and nearby crossings. Before we plan a Santa Rosa bore, tell us what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help show whether the route approaches Texas State Highway 107, the Rio Valley Switching Company track or a marked utility.

A straightforward route through Raymondville clay loam with few crossings is simpler to plan than a route beside pavement or the Rio Valley Switching Company track. Price depends on length, pipe or conduit size, soil, exposed utilities, concrete or pavement, creek or drainage crossings, pits, excavator time and sand backfill. The 701 road miles from Yukon affect mobilization, and high profile or emergency work can add planning demands. A route near Texas State Highway 107 also needs its permit and bore design considered.

Questions people ask about boring in Santa Rosa

Does Trinity take directional boring work in Santa Rosa and Cameron County?

Yes. We take directional boring work in Santa Rosa, and we coordinate the job with our own crews or vetted partner drilling contractors working from satellite yards. You deal with Trinity through the bore log regardless of which crew is on site. A route near Texas State Highway 107 still needs its own crossing plan.

Who controls 13th Street in Santa Rosa, and does a bore require cutting it?

Santa Rosa is incorporated, so its city streets belong to the town itself. A bore along or beneath 13th Street can pass under the surface rather than use an open cut, with entry and exit pits set in dirt where the route allows. Marked utilities still need to be exposed before drilling near them.

How old are buried lines near Santa Cruz Avenue in Santa Rosa?

The American Community Survey 2019 to 2023 estimates put Santa Rosa’s median housing year at 1989, and 76 percent of homes were built from 1960 to 1999. That makes a replacement route near Santa Cruz Avenue worth checking against existing lines. In Santa Rosa, we expose marked utilities before drilling close to them along the planned bore route.

Can Raymondville soil in Santa Rosa corrode steel, and what pipe should I use?

The soil survey maps high steel corrosion risk across 75 percent of Santa Rosa. That is a reason for the line owner to consider casing and tracer wire materials when planning a route through Raymondville soil. HDPE does not share that steel corrosion concern; the line owner selects materials for the job.

What ground will a bore pass through in Santa Rosa near Raymondville?

The USDA soil survey maps Raymondville across 70 percent of Santa Rosa. At about 40 inches, clay is mapped across 70 percent of the area and clay loam across 25 percent, with sandy clay loam across 5 percent. Clay can stick to a reamer, so staged reaming and fluid control matter.

Will our directional bore in Santa Rosa hit rock along the route?

Bedrock is not mapped within 60 inches in Santa Rosa, but that does not rule out deeper rock. The geologic map identifies Pleistocene Beaumont Formation flood plain deposits, including mud veneer over meander belt sand. A site specific route still needs planning for the ground it may encounter.

Does the distance from Yukon to Primera and Santa Rosa change a bore job?

Santa Rosa is 701 road miles from our Yukon, Oklahoma, main office, and Primera is 5.1 miles southeast of town. That distance can affect mobilization and scheduling for a route near Primera or Santa Rosa. Send the location and scope so we can assess the specific bore.

How early should I request Texas811 marks for a Santa Rosa bore near Parker Road?

For a bore near Parker Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a bore near Texas State Highway 107 in Santa Rosa?

The route length, pipe or conduit size, Raymondville clay, pavement, exposed utilities and any drainage crossing all affect the job. A bore near Texas State Highway 107 also needs its permit and crossing plan considered. The 701 road miles from Yukon affect mobilization, while pits, excavator time, sand backfill and emergency timing can change the scope.

Where the Santa Rosa facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Santa Rosa

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Santa Rosa, Texas

Type the address of your job in Santa Rosa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Santa Rosa

Same county: Brownsville · Harlingen · San Benito · Los Fresnos · La Feria · Cameron Park · Port Isabel · Laguna Vista · Laureles · Laguna Heights · Combes · La Paloma. All counties: Texas county list.