trinityboringsolutions.com

Lakeport Texas Directional Boring: Cuthbert Fine Sandy Loam, Sabine River, Texas State Highway 322

Quick Answer: For crossings at the Sabine River and Texas State Highway 322, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Lakeport, Texas. Lakeport is 347 road miles from our Yukon office, so we staff Gardiner Mitchell Parkway work with our own crews and vetted partner crews. Cuthbert fine sandy loam covers 26 percent of the mapped area, and clay lower down can grip pipe, so we plan staged reaming. On Estes Parkway, a bore can leave pavement uncut while pits sit off the travel surface.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lakeport bores at a glance

  • Incorporated city in Gregg County, Texas. Population 992 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 347 miles, about 6.7 hours of driving.
  • Ground: Cuthbert soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 322, Texas State Highway 149 and FM 349. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Sabine River and Dutchman Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Gardiner Mitchell Parkway in Lakeport?

Trinity Boring Solutions handles directional boring in Lakeport, Gregg County, for water, sewer, gas, electric conduit and fiber. Those lines can be routed beneath Gardiner Mitchell Parkway or Texas State Highway 149 to reach a service or connect facilities without opening the surface along the full route. Lakeport’s population is 992 in the Census Bureau Vintage 2024 estimate.

Our main office is in Yukon, Oklahoma, and Lakeport work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, with Lakeport 347 road miles from our Yukon main office. That experience covers a Lakeport scope from a 3/4 inch service line to 48 inch casing, with Gardiner Mitchell Parkway access and the Sabine River route shaping the plan.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is the ground like for a Lakeport bore through Cuthbert soil?

The USDA soil survey maps Cuthbert soils across 26 percent of Lakeport, with Kirvin at 19 percent, Kullit at 16 percent, Bowie at 16 percent and Ruston at 10 percent. Cuthbert fine sandy loam is mapped on slopes of 8 to 25 percent. At about 40 inches, sandy clay loam covers 53 percent of the mapped area, clay loam 27 percent and clay 11 percent. Average clay content at that depth is 31 percent, while sandy material is mapped under 2 percent. Cuthbert and Kirvin are mapped soil patterns in Lakeport, not test borings, so we verify subsurface conditions before setting a bore path.

USDA soil survey, inside the Lakeport city limitsWhat is mapped
Soil series mappedCuthbert 26 percent, Kirvin 19 percent, Kullit 16 percent, Bowie 16 percent and Ruston 10 percent
Texture at the surfacefine sandy loam 57 percent, very fine sandy loam 24 percent and gravelly fine sandy loam 11 percent
Texture about 40 inches downsandy clay loam 53 percent, clay loam 27 percent and clay 11 percent
Engineering class about 40 inches downlean clay (CL) 52 percent, clayey sand (SC) 27 percent and fat clay (CH) 16 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches41 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel48 percent of the area

USDA soil data show no bedrock mapped inside the top five feet of Lakeport, which does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 41 percent of the area, so pits may need pumping. Flood prone soils cover 2 percent. High steel corrosion risk is mapped across 48 percent, a concern for uncoated casing and tracer wire that the line owner should address. The Eocene Reklaw Formation includes sandstone and claystone; if a bore reaches weathered sandstone, drilling may slow at that contact.

How do we plan a Lakeport bore in fine sandy loam rather than the sandy clay loam named in this question, near Gardiner Mitchell Parkway?

The USDA maps sandy clay loam at about 40 inches across much of Lakeport, with clay loam and clay also present. We adjust the fluid and reaming plan to keep the hole stable and avoid loading nearby pavement.

  1. In Cuthbert fine sandy loam, we use a fluid plan that helps keep the bore open without leaving sticky clay piled on the reamer.
  2. Because sandy clay loam and clay loam are common at about 40 inches, we ream in stages and prepare the pipe before opening the final hole.
  3. Where Lakeport’s seasonal water table is mapped within 60 inches, we keep pits small and pump water as needed to keep the work area usable.
  4. At a Sabine River crossing, we plan the bore below the channel and check jurisdiction during planning; a walkover locator tracks depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where might a Lakeport line go under the Sabine River?

Texas State Highway 322 has 1.6 mapped roadway miles inside Lakeport; Texas State Highway 149 and FM 349 each have 1.3. The longest mapped streets include Gardiner Mitchell Parkway at 1.47 miles, Estes Parkway at 1.35 miles and Jones Road at 1.26 miles. A bore under a highway or one of these streets can keep the surface intact, with entry and exit pits placed off the traveled route. The route and pavement still affect the bore plan.

CrossingTypeMapped extentWho has a say
Texas State Highway 322State highway1.6 roadway miles insideState highway office
Texas State Highway 149State highway1.3 roadway miles insideState highway office
FM 349State highway1.3 roadway miles insideState highway office
Sabine RiverStream0.54 channel miles insideChecked for Corps of Engineers jurisdiction
Dutchman CreekStream0.15 channel miles insideChecked for Corps of Engineers jurisdiction
Peatown BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Massey BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Lakeport or within one mile outside its limits, and none of the mapped street and rail crossings is identified here. The Sabine River runs 0.54 channel miles in the city, and Dutchman Creek runs 0.15; two mapped street crossings intersect named streams. A river or creek bore needs review for U.S. Army Corps of Engineers jurisdiction during planning. We see no lakes or ponds mapped within one mile of Lakeport, so Sabine River crossings need separate site planning.

Do I need a permit for a Lakeport bore in Gregg County?

Lakeport is incorporated, so its city streets, including Jones Road and Gardiner Mitchell Parkway, belong to the city itself. For work in the right of way of Texas State Highway 322, Texas State Highway 149 or FM 349, the line owner files a utility permit through TxDOT’s RULIS system; the TxDOT Tyler District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. TxDOT cover rules set 60 inches for electric and communication lines at highway crossings and 48 inches along the right of way; the permit can set another depth. Highway pavement is bored or tunneled, with casing at crossings. A Sabine River crossing is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What utility lines are already in Gregg County around Lakeport?

EPA drinking water records do not tie a named system to Lakeport, so they do not identify the provider at a particular address. Before planning a water bore near Jones Road, confirm the address with the city, Gregg County or the local water district. In Gregg County, Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report service. We confirm the line owner for the bore route before planning electric conduit.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Gregg CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Lakeport’s median housing year at 1986; 6 percent of homes were built before 1960, 67 percent from 1960 to 1999 and 27 percent in 2000 or later. A replacement bore near Estes Parkway needs the actual line located rather than an age assumed from nearby housing. We hydrovac expose marked utilities on the route before drilling near them, since paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Lakeport, including Longview?

Lakeport is in Gregg County, at elevation 307 feet, and covers 1.59 square miles. Its ZIP code is 75603. Lake Cherokee is 4.7 miles southeast, Easton is 7.1 miles east, Longview is 8.5 miles north and Kilgore is 8.8 miles west. Longview is both the county seat and the nearest larger city. From our Yukon yard, Lakeport is 347 road miles away, a 6.7 hour drive; that distance is part of planning crew mobilization for a bore along Texas State Highway 322 or Estes Parkway.

Places near Lakeport

What kinds of bores come up around Lakeport’s Estes Parkway?

  • Highway crossing: A bore below Texas State Highway 322 can keep the pavement intact, with the route and required cover worked out for the permit.
  • Street service: Water or sewer along Jones Road can be installed by bore, with pits set outside the part of the street that needs to stay open.
  • Creek crossing: A Sabine River bore needs a route planned below the channel and a jurisdiction check before the crossing plan is settled.
  • Utility conduit: Electric conduit near Gardiner Mitchell Parkway starts with confirming the line owner and exposing marked utilities along the route.
  • Fiber route: A fiber bore along Estes Parkway can pass below pavement without cutting the full route open.
  • Water service: A connection near Texas State Highway 149 needs the water provider confirmed for the specific address before the bore is planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Lakeport bore under Texas State Highway 322?

For a quote near Texas State Highway 322, tell us where the work is, what will go in the ground, the pipe or conduit size and the footage. A map pin or street address helps us place the route against local features such as Gardiner Mitchell Parkway or the Sabine River. A sketch or plans can clarify the crossings and pit locations.

We set Gregg County project pricing from the job scope, including the route and installation conditions for each underground crossing. The 347 road miles from Yukon affect mobilization, while Cuthbert soil and clay lower down can shape drilling time and reaming. A Texas State Highway 322 crossing may need highway permit planning, cover and casing details. We also look at utility crossings and potholing, pavement or concrete, creek access, pits, excavator time and backfill. Emergency or high profile work can add planning needs.

Questions people ask about boring in Lakeport

Does Trinity take directional boring work in Gregg County’s Lakeport?

Yes. We take directional boring work in Lakeport, and the job is handled through Trinity from the first call to the bore log. Our crews or partner drilling contractors we have vetted can handle a route such as one along Gardiner Mitchell Parkway. The specific crew arrangement depends on the work and mobilization.

For a bore under Texas State Highway 322 in Lakeport, should we route state permit questions to the TxDOT Tyler District?

The line owner applies for the right of way utility permit through TxDOT’s RULIS system, and the TxDOT Tyler District reviews it. We prepare the bore plan and profile for that application. A Texas State Highway 322 crossing also has to meet the cover and casing conditions set for the approved route.

Can a line be bored under the Sabine River in Lakeport?

A bore can be planned under the Sabine River, which runs 0.54 channel miles in Lakeport. The route needs to pass below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The site conditions and crossing plan determine how the work proceeds.

Who owns electric lines in Gregg County’s Lakeport, and who confirms conduit specs?

Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Gregg County, but that does not identify the owner at every Lakeport address. We confirm the line owner for the specific route before planning conduit, including a route near Jones Road, and the owner confirms its conduit requirements.

Does the city or county control Jones Road in Lakeport, and must it be cut?

Lakeport is an incorporated city, so Jones Road is a city street rather than a county street. A directional bore can pass beneath the roadway without cutting the full street surface; the entry and exit pits are placed beside the route. The precise approach depends on the crossing and access.

How old are homes and buried lines near Estes Parkway in Lakeport?

The American Community Survey 2019 to 2023 five year estimates give Lakeport a median housing year of 1986. Housing age does not establish the age or depth of a buried line near Estes Parkway. For a replacement bore, we locate and expose marked utilities before drilling near them, then plan around what is actually in the route.

How far is Lakeport from Yukon by way of Longview, and does it affect a bore?

Lakeport is 347 road miles and a 6.7 hour drive from our Yukon yard. Longview, the county seat, is 8.5 miles north of Lakeport. The Yukon distance is considered in mobilization planning for work on a route such as Texas State Highway 149; the ground, crossings and equipment needs also shape the job.

How much 811 notice is needed for a Lakeport bore near Gardiner Mitchell Parkway?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If the start moves more than 14 days past the original notice for Gardiner Mitchell Parkway, make a new request. Before work continues near Jones Road, we have worn or moved marks refreshed through Texas811.

What affects the cost of a Lakeport bore under Texas State Highway 322?

The route and work scope determine the price, not just the footage. For Texas State Highway 322, factors include the 347 road miles from Yukon, soil and clay conditions, highway permit and casing needs, utility crossings, pavement, potholing, pits and backfill. A nearby Sabine River crossing or emergency schedule can add planning and equipment demands.

Where the Lakeport facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lakeport

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lakeport, Texas

Type the address of your job in Lakeport. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lakeport

Same county: White Oak · Gladewater · Liberty City · Clarksville City · Warren City. All counties: Texas county list.