trinityboringsolutions.com

Dripping Springs Texas Directional Boring: Brackett Soil, US 290 and Little Barton Creek

Quick Answer: Can we get your line beneath US 290 or Little Barton Creek without cutting pavement or bank? Yes, we do directional boring, also called horizontal directional drilling (HDD), in Dripping Springs for routes like those. Dripping Springs is 423 road miles from our Yukon yard, and Creek Road runs 1.56 miles within the city. Brackett soil and shallow mapped bedrock can slow a bore, so we plan the tooling and reaming around the route.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Dripping Springs bores at a glance

  • Incorporated city in Hays County, Texas. Population 10,165 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 423 miles, about 8.2 hours of driving.
  • Ground: Brackett soil is mapped on 36 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 92 percent of the area.
  • Highways inside the boundary: US 290, RM 12 and RM 150. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Little Barton Creek, Onion Creek and Jackson Branch.
  • Public water: Dripping Springs Water Supply Corporation, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Creek Road in Dripping Springs?

Can we get your water, sewer, gas, electric conduit or fiber line beneath Creek Road or US 290 without cutting the surface? We take directional boring work in Dripping Springs, Hays County, where the Census Bureau Vintage 2024 estimate puts the population at 10,165. We route the bore to the line and crossing, whether it serves a home along Blue Ridge Drive or follows another city street.

Our main office is in Yukon, Oklahoma, and Dripping Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters around lines owned by Dripping Springs Water Supply Corporation and the electric providers reporting service in Hays County. Our family business began in 1965, and we have done directional boring since 1982; for a US 290 crossing in Dripping Springs, we plan around the route.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a Dripping Springs bore meet in Brackett soil?

The USDA soil survey maps Brackett as the leading soil series in Dripping Springs, covering 36 percent of the city. Brackett soil appears in mapped complexes with rock outcrop, Comfort and Real soils, so a route can change from soil to rock over a short distance. About 40 inches below the surface, the survey maps bedrock across 92 percent of the area, clay loam across 5 percent and clay across 3 percent. Surface textures include paragravelly clay loam and silty clay, while no sandy area is mapped at that depth. Brackett, Real, Doss and Comfort soil patterns guide our planning in Dripping Springs, but they are mapped patterns, not test borings.

USDA soil survey, inside the Dripping Springs city limitsWhat is mapped
Soil series mappedBrackett 36 percent, Real 21 percent, Doss 12 percent, Comfort 8 percent and Denton 5 percent
Texture at the surfaceparagravelly clay loam 27 percent, gravelly loam 21 percent and silty clay 18 percent
Texture about 40 inches downbedrock 92 percent, clay loam 5 percent and clay 3 percent
Engineering class about 40 inches downlean clay (CL) 5 percent and fat clay (CH) 3 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches92 percent of the area (21 percent hard rock, 71 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel34 percent of the area

Bedrock is mapped within 60 inches across 92 percent of Dripping Springs; the survey classifies 21 percent of that area as hard bedrock and 71 percent as weathered bedrock. A typical mapped depth is 17 inches, so we allow for rock tooling and slower progress, with extra care where soil meets rock. Along Little Barton Creek, our mapped soil information does not show seasonal water tables or flood prone soils. High steel corrosion risk covers 34 percent, a reason to discuss casing and tracer wire material with the line owner. The geologic map names Glen Rose Limestone of Albian age, another reason to check actual route conditions before choosing the bore setup.

What does it take to bore Dripping Springs bedrock?

With bedrock mapped close to the surface across much of Dripping Springs, we plan the route and tooling for rock as well as soil. The Brackett soil map is a guide, not a substitute for checking the actual bore path.

  1. Where Brackett soil gives way to the bedrock mapped within about 17 inches, we select tooling for the ground and ream in stages rather than treating the route as uniform.
  2. At a US 290 pavement crossing, we plan the bore path and pits around the roadway, then track the drill head from the surface and record depth and pitch.
  3. Before the drill approaches marked lines near Dripping Springs Water Supply Corporation or an electric route on Blue Ridge Drive, we expose them with hydrovac potholing.
  4. For a Little Barton Creek route, we plan to stay beneath the channel and check for possible Corps jurisdiction; the survey maps no flood prone soils in the city.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks might a Dripping Springs bore cross near US 290?

US 290, RM 12 and RM 150 run inside Dripping Springs, so a route crossing one of them needs highway coordination. Creek Road is the city’s longest named street at 1.56 miles, followed by Post Oak Road at 1.22 miles and Post Oak Drive at 1.18 miles. Blue Ridge Drive adds another 1.15 miles of named roadway. A bore beneath existing highway pavement avoids opening the road surface, while the exact path and access determine where the entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
US 290US highway4.4 roadway miles insideState highway office
RM 12State highway6 roadway miles insideState highway office
RM 150State highway1.2 roadway miles insideState highway office
Little Barton CreekStream0.44 channel miles insideChecked for Corps of Engineers jurisdiction
Onion CreekStream0.42 channel miles insideChecked for Corps of Engineers jurisdiction
Jackson BranchStream0.04 channel miles insideChecked for Corps of Engineers jurisdiction
Barton CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Pier BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
South Onion CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Long BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Dripping Springs or within 1 mile outside the city limits, and no mapped street and rail crossings appear in the city. Little Barton Creek runs 0.44 channel miles inside the limits, Onion Creek 0.42 and Jackson Branch 0.04; one street crossing of a named stream is mapped. Barton Creek runs along or touches the city boundary. There are no lakes or ponds mapped within 1 mile. Creek routes are checked for possible Corps jurisdiction during planning.

Do I need a permit to bore beneath a road in Dripping Springs, Hays County?

For a bore in the right of way of US 290, RM 12 or RM 150, the line owner, not our drilling crew, applies for a TxDOT utility permit through RULIS. TxDOT’s Austin District reviews the application; we prepare the bore plan and profile for the owner and work under its permit. Existing highway pavement is crossed by boring or tunneling. At a crossing, electric and communication lines, water lines and pressurized sewer lines need at least 60 inches of cover below the lowest point of the grade crossed. For a crossing on RM 12, we follow the permit depth if it differs from our planned bore depth. City streets such as Creek Road belong to the incorporated city. Little Barton Creek crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Dripping Springs Water Supply Corporation lines?

Dripping Springs Water Supply Corporation uses purchased surface water and reports 2,679 service connections serving 8,037 people. The City of Dripping Springs public water system also uses purchased surface water, with 178 connections serving 531 people. Hays County electric service is reported by City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near US 290 or Blue Ridge Drive.

Line ownerWhat it isSourceSize
Dripping Springs Water Supply CorporationPublic water systemSurface water bought from another system2,679 connections, 8,037 people served
City of Dripping SpringsPublic water systemSurface water bought from another system178 connections, 531 people served
City of San Marcos, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Hays CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Dripping Springs’ median housing year at 2013; 82 percent of homes were built in 2000 or later and 18 percent from 1960 to 1999. That mix can mean new service routes as well as replacement work on older lines. Before a bore near Dripping Springs Water Supply Corporation or an electric line, we hydrovac pothole marked utilities on the planned path. Paint shows where a line runs, not how deep it is.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Dripping Springs in relation to Kyle?

Dripping Springs is an incorporated city in Hays County, with 8.82 square miles of land and an elevation of 1,169 feet. For underground work in Hays County, we use the listed Dripping Springs ZIP codes 78620, 78619 and 78737 to identify service locations. Nearby, Driftwood is 5.5 miles southeast and Belterra is 6.5 miles east; Kyle is 18.8 miles southeast. San Marcos, the county seat, is 24.2 miles southeast. From our Yukon, Oklahoma yard, the drive is 423 road miles and 8.2 hours. That distance is part of planning mobilization for a bore on US 290 or a city street.

Places near Dripping Springs

Which jobs call for a bore near Little Barton Creek in Dripping Springs?

  • Highway crossing: A bore beneath US 290 keeps the line below the existing pavement, with the route and pits planned around the crossing.
  • Water service: A new connection near Dripping Springs Water Supply Corporation can be bored from a property side toward the service route without trenching the whole path.
  • Fiber route: A conduit bore along Creek Road can carry fiber beneath pavement and driveways, with marked utilities exposed before drilling near them.
  • Creek crossing: A Little Barton Creek bore is planned beneath the channel, with route review for possible Corps jurisdiction.
  • Electric conduit: Near Blue Ridge Drive, we confirm the serving line owner before planning a conduit route and pothole marked utilities along the bore path.
  • Sewer line: A sewer bore near RM 12 can pass beneath the road surface, with the line size, depth and right of way needs set in the plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Blue Ridge Drive in Dripping Springs?

For a quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help us place the route near Blue Ridge Drive. Include any planned crossing of US 290, Little Barton Creek or a paved driveway, since each can change the bore layout and access.

The Brackett soil and shallow mapped bedrock make ground conditions the first pricing question, since rock can change tooling and drilling time. Next are the line size and bore length, then the utilities that need exposure along the route. A US 290 crossing, concrete or pavement, or a Little Barton Creek crossing can add planning and equipment needs. Pit size, excavator time, sand backfill and emergency timing matter too. Mobilization also depends on the 423 road miles from Yukon.

Questions people ask about boring in Dripping Springs

Does Trinity take directional boring work in Dripping Springs and Hays County?

Yes. We take Dripping Springs work in Hays County using our own crews and satellite yards operated by drilling partners we have vetted. You work with Trinity through planning and the bore log, whichever crew is on site. We can install water, sewer, gas, electric conduit and fiber lines for routes near Creek Road or US 290.

What ground should I expect for a bore through Brackett soil in Dripping Springs?

The USDA soil survey maps Brackett across 36 percent of Dripping Springs, often in complexes with rock outcrop. About 40 inches down, bedrock is mapped across 92 percent of the city, while clay loam and clay account for the remainder. A route near Little Barton Creek still needs site specific planning because mapped soils are not test borings.

How much of Dripping Springs has bedrock in the top five feet, and is it hard?

The USDA soil survey maps bedrock within 60 inches across 92 percent of Dripping Springs. It classifies 21 percent of the area as hard bedrock and 71 percent as weathered bedrock. Around a route near US 290, that map suggests we should plan for possible rock, but the actual ground can vary along the bore.

Who handles approval through the TxDOT Austin District for our bore under US 290 in Dripping Springs?

The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Austin District reviews it. We prepare the bore plan and profile for the owner and work under its permit. For a US 290 crossing, the plan must account for cover and boring beneath existing highway pavement.

Can a line be bored beneath Little Barton Creek in Dripping Springs?

A bore can be planned beneath Little Barton Creek, which runs 0.44 channel miles inside Dripping Springs. The route must be designed for the channel crossing, and possible U.S. Army Corps of Engineers jurisdiction is checked during planning. The soil survey maps no flood prone soils within the city.

Who runs the public water systems in Dripping Springs, and where does the water come from?

Dripping Springs Water Supply Corporation uses purchased surface water and serves 8,037 people through 2,679 connections. The City of Dripping Springs system also uses purchased surface water, serving 531 people through 178 connections. For a bore near Creek Road, confirm which system or service line owns the specific route.

What bore sizes and lengths can Trinity handle near Blue Ridge Drive in Dripping Springs?

For a Creek Road crossing in Dripping Springs, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a job near Blue Ridge Drive, the route, ground and crossings help determine what setup fits. A sketch showing the line path and any pavement or utility conflicts helps us assess it.

How early should I call Texas811 for a Dripping Springs bore near Creek Road, and what if marks move?

For a bore near Creek Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a start near Driftwood slips more than 14 days past the original notice, we submit a new request. Before continuing near Onion Creek, we have worn or moved marks refreshed through Texas811.

What affects the price of a directional bore under US 290 in Dripping Springs?

The route and conditions set the price, with Brackett soil and shallow mapped bedrock affecting tooling and time. A US 290 crossing, line size and length, utilities to expose, pavement, pits and excavator work all matter. Little Barton Creek crossings can add planning needs, and mobilization reflects the 423 road miles from Yukon.

Where the Dripping Springs facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Dripping Springs

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Dripping Springs, Texas

Type the address of your job in Dripping Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Dripping Springs

Same county: San Marcos · Buda · Wimberley · Uhland · Austin · Mountain City · Niederwald · Hays · Creedmoor. All counties: Texas county list.