Bay City Texas Directional Boring: Dacosta Clay, BNSF Railway, Cottonwood Creek
Quick Answer: Need a line under Cottonwood Creek or 7th Street without cutting the surface? We use directional boring, also called horizontal directional drilling (HDD), for crossings such as these in Bay City, Texas. The Yukon, Oklahoma main office is 506 road miles away, so distance and access near BNSF Railway can affect mobilization. Dacosta sandy clay loam is common near the surface, while clay at 40 inches can grip the reamer and pipe.
Bay City bores at a glance
- County seat of Matagorda County, Texas. Population 17,471 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 506 miles, about 10.3 hours of driving.
- Ground: Dacosta soil is mapped on 50 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 35, Texas State Highway 60, FM 2668, FM 457 and FM 3156. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: BNSF Railway, Union Pacific and BNSF Railway (line shown as out of service), with 44 mapped street and rail crossings.
- Named streams inside the boundary: Cottonwood Creek, Dry Creek, Bucks Bayou and Colorado River.
- Public water: City of Bay City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Bay City near BNSF Railway?
We take directional boring work in Bay City, Matagorda County, where the Census Bureau Vintage 2024 estimate puts the population at 17,471. Can you get a line beneath a road, track or creek without cutting it? We install water, sewer, gas, electric conduit and fiber beneath 7th Street, Texas State Highway 35 or Cottonwood Creek when the route and ground fit.
Our main office is in Yukon, Oklahoma, and Bay City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small service line beneath Avenue F and a large casing crossing near BNSF Railway fit different ends of our 3/4 inch to 48 inch range. Our family business began in 1965, and we have done directional boring since 1982; those dates frame our Bay City service.

What kind of ground does Bay City have around Dacosta soil?
The USDA soil survey maps Dacosta sandy clay loam across 50 percent of Bay City, with Edna loam at 25 percent and Texana fine sandy loam at 11 percent. For Bay City crossings, we treat these as mapped patterns, not test borings, so they do not confirm conditions at a specific site. At about 40 inches, the survey maps clay across 89 percent and sandy clay across 11 percent; average clay content there is 43 percent. That deeper clay can hold an open hole but may cling to a reamer and grip pipe, so the bore plan needs to account for sticky cuttings.
| USDA soil survey, inside the Bay City city limits | What is mapped |
|---|---|
| Soil series mapped | Dacosta 50 percent, Edna 25 percent, Texana 12 percent and Laewest 11 percent |
| Texture at the surface | sandy clay loam 50 percent, loam 25 percent and fine sandy loam 13 percent |
| Texture about 40 inches down | clay 89 percent and sandy clay 11 percent |
| Engineering class about 40 inches down | fat clay (CH) 89 percent and lean clay (CL) 11 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 26 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 87 percent of the area |
The soil survey maps seasonal water tables within 60 inches across 26 percent of Bay City, so some pits may need pumping. Flood prone soils are not mapped, but Cottonwood Creek still calls for a channel specific crossing plan. High steel corrosion risk is mapped across 87 percent, a concern for steel casing and tracer wire that the line owner should consider. Bedrock is not mapped in the top five feet of the city. The Beaumont Formation, predominantly sand in the mapped area, is Pleistocene age, so actual ground can vary along a route.
How do crews bore through Bay City clay?
Bay City’s mapped clay at 40 inches can make cuttings sticky and put a grip on the pipe. We plan the fluid, reaming sequence and pullback around that condition and check the route before drilling near existing lines.
- Dacosta sandy clay loam covers much of Bay City’s mapped surface, so we adjust drilling fluid and ream in stages to manage sticky cuttings.
- At 40 inches, clay is mapped across 89 percent of the city; we watch returns and pull pipe promptly so swelling clay has less time to grip it.
- Seasonal water tables are mapped within 60 inches across 26 percent of Bay City, so pits near Avenue F may need pumping and careful water control.
- Before a bore near 7th Street, we hydrovac pothole marked utilities on the path because paint shows their location, not how deep they are.

Which Bay City roads, tracks or creeks could a bore cross near 7th Street?
Texas State Highway 35 has 8.2 mapped roadway miles inside Bay City, and Texas State Highway 60 has 5.3, so a crossing route may involve state right of way. FM 2668, FM 457 and FM 3156 are also within the city limits. Among local streets, 7th Street runs 5.59 miles, Avenue F 4.81 miles and Nichols Avenue 2.84 miles. The road owner and route determine the coordination needed, while the street’s pavement and nearby utilities shape the bore plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 35 | State highway | 8.2 roadway miles inside | State highway office |
| Texas State Highway 60 | State highway | 5.3 roadway miles inside | State highway office |
| FM 2668 | State highway | 1.9 roadway miles inside | State highway office |
| FM 457 | State highway | 0.2 roadway miles inside | State highway office |
| FM 3156 | State highway | 0.2 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 2.61 track miles inside | The railroad |
| Union Pacific | Railroad | 2.48 track miles inside | The railroad |
| BNSF Railway (line shown as out of service) | Railroad | 1.33 track miles inside | The railroad |
| Cottonwood Creek | Stream | 8.42 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream | 1.3 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bucks Bayou | Stream | 0.72 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Colorado River | Stream | 0.25 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Spoil Bank | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Live Oak Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 2.61 track miles mapped in Bay City, plus 1.33 miles of a line shown as out of service; Union Pacific has 2.48 track miles. Public records map 44 street and rail crossings, so a route near either railroad needs track specific planning. Cottonwood Creek runs 8.42 channel miles in the city, and 30 street crossings of named streams are mapped. A creek route needs a suitable bore path and a check for federal waterway jurisdiction during planning.
Do I need a permit to bore in Bay City or Matagorda County?
For a bore beneath Texas State Highway 35 or another state highway in Bay City, cover depth helps set the route: electric and communication lines need 60 inches at a crossing, water needs 60 inches, and pressurized sewer needs 60 inches. TxDOT rules require boring or tunneling beneath existing highway pavement, and the TxDOT Yoakum District reviews the utility owner’s application in RULIS. The utility owner files; we provide the bore plan and profile and work under its permit. A crossing of BNSF Railway or Union Pacific needs an agreement with the track owner. City streets such as Nichols Avenue belong to the city. Cottonwood Creek is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Bay City water system?
The City of Bay City public water system uses groundwater wells and reports 9,481 service connections serving 18,061 people. That network matters when a bore approaches 7th Street or another water route. Electric service reported in Matagorda County includes AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative. We confirm the line owner for the specific location before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Bay City | Public water system | Groundwater wells | 9,481 connections, 18,061 people served |
| AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative | Electric utilities reporting service in Matagorda County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Bay City’s median housing year at 1977; 20 percent of homes were built before 1960, 63 percent from 1960 to 1999 and 17 percent in 2000 or later. A replacement bore along Avenue F may meet older buried lines, while a newer service can follow a different route. We use hydrovac potholing to expose marked utilities before drilling near them, since locate marks show position, not depth.

How far is Bay City from Yukon, Oklahoma, and Markham?
Bay City is the Matagorda County seat, at an elevation of 50 feet, and covers 9.27 square miles. ZIP code 77414 serves Bay City, helping us identify the service area when coordinating underground work. Markham is 6.5 miles west, Van Vleck is 5.5 miles northeast, Wadsworth is 11.0 miles south, Midfield is 15.6 miles west and Sweeny is 16.4 miles east. Rosenberg, the nearest larger city listed, is 40.0 miles north. The Yukon, Oklahoma yard is 506 road miles away, a 10.3 hour drive, so mobilization matters for work near Texas State Highway 60 or Cottonwood Creek.
Places near Bay City
- Directional boring in Van Vleck: 5.5 miles northeast
- Directional boring in Markham: 6.5 miles west
- Directional boring in Wadsworth: 11 miles south
- Directional boring in Midfield: 15.6 miles west
- Directional boring in Sweeny: 16.4 miles east
- Directional boring in Rosenberg: 40 miles north
What boring work comes up in Bay City near Avenue F?
- Highway crossing: A bore beneath Texas State Highway 35 keeps the crossing below the pavement and follows the applicable TxDOT permit plan.
- Water service: A connection near the City of Bay City system can use a bore to reach a building without opening the full street route.
- Fiber route: Avenue F’s 4.81 miles of mapped street provide a local example of a longer corridor where conduit may need utility potholing.
- Creek crossing: A Cottonwood Creek bore needs a route planned around the channel and a check for federal waterway jurisdiction.
- Rail crossing: A route beneath BNSF Railway needs coordination with the railroad that owns the track.
- Street crossing: A bore beneath Nichols Avenue can avoid cutting pavement, with the city street route and buried utilities considered in the plan.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Bay City quote near Cottonwood Creek?
For a quote near Cottonwood Creek or Avenue F, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. Those details let us compare the proposed route with nearby streets, drainage and utilities before we set the bore scope.
The Bay City job scope shapes the price through ground, crossings and logistics. Dacosta soil and deeper clay affect drilling and reaming; Texas State Highway 35 or BNSF Railway may add crossing coordination. Creek or drainage crossings, exposed utilities, pavement, pits, sand backfill and excavator time also change the work. The 506 road miles from Yukon affect mobilization, while pipe size, footage, emergency timing and access complete the picture.
Questions people ask about boring in Bay City
Does Trinity Boring Solutions take jobs in Bay City and Matagorda County?
Yes, we take directional boring work in Bay City and across Texas. Our main office is in Yukon, and our own crews or vetted partner contractor crews can staff work in Matagorda County. You deal with Trinity from the first call through the bore log, including work near Texas State Highway 35.
Can you bore a line under Cottonwood Creek in Bay City?
A bore beneath Cottonwood Creek can be planned without cutting the creek bank, subject to the route and ground. The creek runs 8.42 channel miles within Bay City, so we plan the crossing around its channel and check for federal waterway jurisdiction. The proposed line, depth and access shape the method.
Who runs Bay City’s public water system, and where does its water come from before we plan nearby underground work?
The City of Bay City runs the public water system, which draws from groundwater wells. It reports 9,481 service connections and 18,061 people served. For a bore near 7th Street, the system’s presence means the proposed route needs to be checked for existing water lines.
Which electric line owners should I check in Bay City, Matagorda County?
AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report electric service in Matagorda County. That list does not identify the provider at every Bay City address. We confirm the line owner before planning a conduit bore near Avenue F or another street.
Who controls Nichols Avenue in Bay City, and can a bore avoid cutting it?
Nichols Avenue is a city street, so it belongs to the City of Bay City. Directional boring can place a line below the pavement without cutting the street when the route and ground allow. We also check for marked utilities along the path before drilling near the crossing.
How old are Bay City homes and buried lines near Avenue F?
Bay City’s median housing year is 1977, and the American Community Survey estimates 20 percent of homes were built before 1960. That age can make replacement work near Avenue F more likely to meet older buried utilities, though it does not identify any specific line. We pothole marked lines before drilling near them.
How far is Bay City from Trinity’s Yukon office, and does Rosenberg change the job?
Bay City is 506 road miles from the Yukon, Oklahoma main office, a 10.3 hour drive. Rosenberg is 40.0 miles north of Bay City, but the Yukon distance is the key mobilization factor for our work. Access near Texas State Highway 60 and the job scope also affect planning.
How much notice does Texas811 need for a Bay City bore near 7th Street?
For a bore near 7th Street, request a Texas811 locate at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days ahead. For Bay City scheduling, if the start slips more than 14 days past the original notice, we make a new request. Worn or moved marks need refreshing through Texas811 before work continues.
What affects the cost of a Bay City bore under Texas State Highway 35?
The job details determine the price, including bore length and size, Dacosta soil, pavement, utility crossings and pit work. A Texas State Highway 35 crossing can require highway permit planning, while Cottonwood Creek may add crossing considerations. Mobilization from Yukon is another factor because Bay City is 506 road miles from the main office.
Where the Bay City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bay City
- U.S. Census Bureau, TIGER/Line 2024: Bay City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bay City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bay City housing units and year built
- Macrostrat geologic map compilation: map units under Bay City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Bay City
- U.S. Department of Transportation, North American Rail Network: track owners in Matagorda County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Matagorda County
- U.S. Geological Survey, Elevation Point Query Service: Bay City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bay City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bay City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bay City, Texas
Type the address of your job in Bay City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bay City
Same county: Palacios · Blessing · Matagorda · Sargent. All counties: Texas county list.
