Canyon Creek Texas Directional Boring: Eckrant Soil, Contrary Creek And Glen Rose Limestone
Quick Answer: At Williamson Road, what does the top five feet show? Eckrant soil and shallow bedrock shape how we plan directional boring, also called horizontal directional drilling (HDD), for routes under local streets. Canyon Creek is 258 road miles from our Yukon, Oklahoma main office, and Contrary Creek is a local crossing to consider. The USDA soil survey maps bedrock within 40 inches across 58 percent of the area, so the drill plan must account for rock close to the surface.
Canyon Creek bores at a glance
- Unincorporated community in Hood County, Texas. Population 1,249 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 258 miles, about 5.2 hours of driving.
- Ground: Eckrant soil is mapped on 56 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 82 percent of the area.
- No state or US highway is mapped inside the boundary. Closest: Texas State Highway 144.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Contrary Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Williamson Road in Canyon Creek?
We take directional boring work in Canyon Creek, Hood County, including routes along Williamson Road and San Gabriel Drive for water, sewer, gas, electric conduit and fiber. The Census Bureau counted 1,249 people here in the 2020 Census. That count describes an unincorporated community, not a city service area, so we plan a bore around the actual address and the line being installed.
Our main office is in Yukon, Oklahoma, and Canyon Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have done directional boring since 1982. Four decades in the trade means we plan for the Eckrant soil and shallow bedrock mapped along streets such as Williamson Road, rather than treating every route like easy soil.

What ground does a bore meet in Canyon Creek’s Eckrant soil?
The USDA soil survey maps Eckrant soil across 56 percent of Canyon Creek. Very cobbly clay is the leading surface texture, also mapped across 56 percent, while fine sandy loam covers 19 percent. At about 40 inches below the surface, bedrock is mapped across 56 percent of the area, and sandy clay across 23 percent. Average clay content at that depth is 33 percent. These are mapped soil patterns, not test borings; a route near Steepleridge Circle still needs planning for the ground at its exact location.
| USDA soil survey, inside the Canyon Creek mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Eckrant 56 percent, Windthorst 25 percent and Sunev 6 percent |
| Texture at the surface | very cobbly clay 56 percent, fine sandy loam 19 percent and very fine sandy loam 7 percent |
| Texture about 40 inches down | bedrock 56 percent, sandy clay 23 percent and clay loam 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 34 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | 82 percent of the area (56 percent hard rock, 25 percent weathered rock) |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 58 percent of the area |
Bedrock is mapped within 60 inches across 82 percent of Canyon Creek, including hard bedrock across 56 percent and weathered bedrock across 25 percent. The typical mapped depth is 24 inches, so a bore may need rock tooling and slower progress. Seasonal water tables within 60 inches cover 1 percent, and flood prone soils are not mapped. High steel corrosion risk covers 58 percent. The Glen Rose Limestone, an Albian geologic unit, is also mapped here. For steel casing or tracer wire, the line owner selects suitable coatings; HDPE does not share that steel corrosion concern.
How do crews handle Canyon Creek’s shallow bedrock?
The Eckrant soil and bedrock mapped close to the surface call for a route specific plan. Near Contrary Creek, we also account for the channel and the ground on both sides.
- Eckrant soil has very cobbly clay at the surface, so we watch how it cuts and manage drilling fluid to keep the hole stable without building excess pressure.
- With bedrock mapped within 40 inches across 58 percent of Canyon Creek, we track the drill head and log depth and pitch as the bore advances.
- Before the drill nears a marked line on San Gabriel Drive, we hydrovac pothole it to verify depth; surface paint alone does not show how deep it sits.
- At a Contrary Creek crossing, we plan the bore below the channel and check during planning whether the crossing falls under Corps jurisdiction.

Where might a Canyon Creek bore pass under Texas State Highway 144?
Texas State Highway 144 is 1.4 miles outside the mapped Canyon Creek boundary, and no highway is mapped inside it. If a route reaches that state road, the line owner needs a TxDOT utility permit before work in the right of way. Inside the community, Williamson Road is the longest named street at 2.38 miles, followed by Steepleridge Circle at 1.89 miles and San Gabriel Drive at 1.0 mile. A bore beneath one of these streets can keep its pavement uncut while pits sit in the dirt on either side.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 144 | Highway nearby | 1.4 miles outside | State highway office |
| Contrary Creek | Stream | 0.5 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lake Granbury | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Canyon Creek or within 1 mile outside the mapped boundary, so there is no local track crossing identified. Contrary Creek runs 0.5 channel miles inside the community, with one mapped street crossing of a named stream. A crossing there needs a route planned under the channel, and its jurisdiction is checked during planning. Lake Granbury lies 0.8 miles outside the boundary, another nearby water feature to check if a proposed route reaches it.
Who approves a Canyon Creek bore in Hood County?
Canyon Creek has no city government, so streets and local approvals are handled by Hood County or the state, depending on the route. For work in the right of way of Texas State Highway 144, the line owner, not the driller, files for a utility permit through TxDOT’s online system. The TxDOT Fort Worth District reviews it. We give the owner the bore plan and profile and work under its permit. At a highway crossing, electric and communication lines need 60 inches of cover, water needs 60 inches, and pressurized sewer needs 60 inches; the permit may set another depth. A Contrary Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities report service in Hood County near Canyon Creek?
EPA drinking water records do not tie a water provider to Canyon Creek by name, so the provider for a specific address must be confirmed with the county or local water district before a bore is planned. Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Hood County. Those records do not identify the electric provider for every Williamson Road address, so we confirm the line owner before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Hood County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Canyon Creek’s median housing year at 2008; 67 percent of homes were built in 2000 or later, and 33 percent from 1960 to 1999. That mix can mean either replacement work or new services along Steepleridge Circle. Along Williamson Road, we pothole each marked utility on the bore path before drilling near it. For example, a marked line beneath San Gabriel Drive needs its depth exposed, since locate paint shows position, not depth.

How far is Canyon Creek from Granbury and our Yukon yard?
Canyon Creek is an unincorporated Hood County community at an elevation of 794 feet, covering 2.35 square miles in ZIP code 76048. Granbury, the county seat and nearest larger city, is 3.6 miles northwest. DeCordova is 3.8 miles northeast, Pecan Plantation is 5.3 miles east, and Stockton Bend is 6.2 miles north. Our Yukon, Oklahoma main office is 258 road miles away, a drive of 5.2 hours. That distance is part of planning mobilization for a bore on Williamson Road or near Contrary Creek.
Places near Canyon Creek
- Directional boring in Granbury: 3.6 miles northwest
- Directional boring in DeCordova: 3.8 miles northeast
- Directional boring in Pecan Plantation: 5.3 miles east
- Directional boring in Stockton Bend: 6.2 miles north
- Directional boring in Oak Trail Shores: 8.8 miles northwest
What would we bore near San Gabriel Drive in Canyon Creek?
- Street bore: A route beneath San Gabriel Drive can leave the pavement intact, with entry and exit pits set in the dirt.
- Water service: A line along Williamson Road needs its address specific water provider confirmed before we plan the connection.
- Fiber conduit: A route near Steepleridge Circle can use a bore to pass beneath a street without open cutting its surface.
- Creek crossing: A bore beneath Contrary Creek needs a plan for the channel and a jurisdiction check during planning.
- Highway crossing: A route under Texas State Highway 144 needs the line owner’s TxDOT permit for work in the right of way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Canyon Creek near Stonegate Circle?
Start with a map pin or address, because a spot on Stonegate Circle can have different access and crossings from one on Williamson Road. For a Canyon Creek crossing near Contrary Creek, tell us what is going in the ground, the pipe or conduit size, and the footage. A sketch or plans help us see the route and any nearby streets or drainage before we scope the bore.
In Hood County, we set the price from the job details for each bore. Ground conditions matter: Eckrant soil and the mapped bedrock can change tooling and drilling time. Crossings matter too, including a route under Texas State Highway 144 or Contrary Creek, and the number of utilities that need exposure. Pavement, concrete, pits, excavator time and sand backfill affect the work. Logistics also count, including mobilization from Yukon, 258 road miles from Canyon Creek. Near Texas State Highway 144, we plan for extra requirements when Canyon Creek work is high profile or emergency work.
Questions people ask about boring in Canyon Creek
Does Trinity take Canyon Creek jobs in Hood County, and who staffs them?
Yes. We take directional boring work in Canyon Creek, and our crews or vetted partner contractor crews handle the site work. The required crew arrangement depends on scheduling and the job. You work with Trinity from the first call through the bore log, whether the work is near Williamson Road or Contrary Creek.
Who is responsible for San Gabriel Drive in Canyon Creek, and does it need cutting?
Canyon Creek has no city government, so local streets fall under Hood County rather than a city. A bore beneath San Gabriel Drive can avoid cutting the road surface; the entry and exit pits sit in the dirt. The route still has to account for marked utilities and the specific street crossing.
How old are Canyon Creek homes and buried lines near Steepleridge Circle?
The American Community Survey 2019 to 2023 five year estimates give Canyon Creek a median housing year of 2008. That does not establish the age of buried lines near Steepleridge Circle. A replacement bore may follow an older utility route, while newer construction may need a service connection; we expose marked lines before drilling close to them.
Does Eckrant soil in Canyon Creek corrode steel, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across 58 percent of Canyon Creek, including areas of Eckrant soil. For a bore near San Gabriel Drive, we leave coating choices for steel casing or tracer wire to the line owner. For Canyon Creek bores through Eckrant soil, we account for HDPE not being affected by that soil corrosion concern. The selected material depends on the line and project requirements.
What ground does a Canyon Creek bore pass through in Eckrant soil?
Eckrant soil covers 56 percent of Canyon Creek, and very cobbly clay is mapped at the surface across 56 percent. At about 40 inches down, the USDA soil survey maps bedrock across 56 percent and sandy clay across 23 percent. Those patterns guide planning, but they are not test borings at a particular address.
Is there rock on a Canyon Creek bore route, and how much is mapped?
The USDA soil survey maps bedrock within 60 inches across 82 percent of Canyon Creek. Hard bedrock is mapped across 56 percent and weathered bedrock across 25 percent. Rock close to the surface can require rock tooling and slower drilling, so the exact route matters.
Can I reach Trinity after hours about an urgent Canyon Creek bore on San Gabriel Drive?
Yes. A person answers our phone 24 hours a day at (405) 409-7423. For an urgent job near San Gabriel Drive, call and describe the location, line and immediate need so we can discuss the response and work scope.
How much notice does Texas811 need for a Canyon Creek bore on Williamson Road?
Texas811 needs the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days ahead. If the start slips more than 14 days past the original notice for Williamson Road, a new request is needed; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the price of a Canyon Creek bore near Texas State Highway 144?
The route and scope determine the price, with no single factor deciding it. Eckrant soil and shallow bedrock affect drilling, while crossings such as Texas State Highway 144 or Contrary Creek can add planning and exposure work. Pipe size, length, pavement, pits, equipment time and mobilization from Yukon also matter.
Where the Canyon Creek facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Canyon Creek
- U.S. Census Bureau, TIGER/Line 2024: Canyon Creek boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Canyon Creek population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Canyon Creek housing units and year built
- Macrostrat geologic map compilation: map units under Canyon Creek
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hood County
- U.S. Geological Survey, Elevation Point Query Service: Canyon Creek elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Canyon Creek
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Canyon Creek
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Canyon Creek, Texas
Type the address of your job in Canyon Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Canyon Creek
Same county: Tolar · Cresson · Lipan. All counties: Texas county list.
