trinityboringsolutions.com

Oak Trail Shores Texas Directional Boring: Brackett Soil, FM 4 and Lake Granbury

Quick Answer: Can we get your line beneath FM 4 without cutting the pavement? We use directional boring, also called horizontal directional drilling (HDD), for routes such as FM 4 and Lake Granbury. Oak Trail Shores is 256 road miles from our Yukon, Oklahoma main office, and Briarwood Street is one local route to plan around. Brackett soil and shallow mapped bedrock can make the ground change quickly, so the bore plan needs to account for rock as well as soil.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oak Trail Shores bores at a glance

  • Unincorporated community in Hood County, Texas. Population 2,979 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 256 miles, about 5.2 hours of driving.
  • Ground: Brackett soil is mapped on 21 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 67 percent of the area.
  • Highways inside the boundary: FM 4. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Lake Granbury.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near FM 4 in Oak Trail Shores?

Can we get a line beneath FM 4 without cutting the pavement? Yes, we take directional boring work in Oak Trail Shores, an unincorporated community in Hood County. The 2020 Census count was 2,979 people. A water or sewer line can be routed under a local street, while electric conduit or fiber can follow a route near FM 4; the exact path depends on the address and existing lines.

Our main office is in Yukon, Oklahoma, and Oak Trail Shores work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, and we have done directional boring since 1982. Our record of no utility strikes in over 25 years matters around the lines already serving Hood County homes and streets such as Oak Trail.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should you expect in Oak Trail Shores near Brackett soil?

The USDA soil survey maps Brackett soils across 21 percent of Oak Trail Shores, with Sunev, Eckrant and Aledo also prominent. Surface textures include loam, clay loam and gravelly clay loam. At about 40 inches below the surface, bedrock is mapped across 67 percent of the area, while clay loam is another mapped texture. Average clay content at that depth is 31 percent, so the hole may hold its shape but sticky cuttings can cling to a reamer. Brackett, Sunev, Eckrant, and Aledo are mapped soil patterns in Oak Trail Shores, not test borings, so we check conditions before boring.

USDA soil survey, inside the Oak Trail Shores mapped community boundaryWhat is mapped
Soil series mappedBrackett 21 percent, Sunev 16 percent, Eckrant 16 percent, Aledo 16 percent and Purves 5 percent
Texture at the surfaceloam 26 percent, clay loam 22 percent and gravelly clay loam 21 percent
Texture about 40 inches downbedrock 67 percent, clay loam 21 percent and clay 4 percent
Engineering class about 40 inches downlean clay (CL) 26 percent and fat clay (CH) 7 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches67 percent of the area (46 percent hard rock, 21 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel26 percent of the area

The USDA soil survey maps bedrock within 60 inches across 67 percent of Oak Trail Shores, including hard bedrock across 46 percent and weathered bedrock across 21 percent. That pattern can mean slower drilling and a change in steering where soil meets rock. Glen Rose Limestone, an Aptian age unit, is mapped here. Seasonal water table and flood prone soils are not mapped in the survey. High steel corrosion risk is mapped across 26 percent, so the line owner should consider casing and tracer wire materials for a route near Brackett soil.

How do crews bore Oak Trail Shores ground with shallow bedrock?

The Brackett soil map and widespread shallow bedrock call for a bore plan that can handle both sticky soil and rock. We track the drill head from the surface and adjust the approach as conditions change near streets such as Hilltop Road.

  1. Brackett soil can hold a bore open but stick to the reamer, so we use thinner drilling fluid, polymer and staged reaming when the soil calls for it.
  2. With bedrock mapped within 40 inches across much of Oak Trail Shores, we select rock capable tooling when needed and watch the soil to rock transition for steering changes.
  3. Before drilling near a marked line on Hilltop Road or another street, we hydrovac pothole that utility because surface paint does not show its depth.
  4. A walkover locator follows the drill head along routes such as Briarwood Street, while the crew records depth and pitch as the bore advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Oak Trail Shores near Lake Granbury?

FM 4 is the state highway mapped inside Oak Trail Shores, with 0.6 roadway miles in the community. Oak Trail, Hilltop Road and Blueberry Trail are among the longest named local streets; Briarwood Street is another route to consider. The mapped road network includes 38.33 public road centerline miles across 88 named streets. A bore beneath pavement can leave the surface intact, but the alignment and work area still need to fit the road and the lines below it.

CrossingTypeMapped extentWho has a say
FM 4State highway0.6 roadway miles insideState highway office
Lake GranburyStream0.24 channel miles insideChecked for Corps of Engineers jurisdiction
Blue BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Robinson CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Strouds CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Lake GranburyLake or pond1,137 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Oak Trail Shores or within one mile outside the community, so there is no mapped track route to plan around. Lake Granbury runs for 0.24 channel miles inside the community, and one crossing of a named stream by a street is mapped. A proposed bore near Lake Granbury needs a route planned for the shoreline and channel; during planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Who approves a bore in Oak Trail Shores and Hood County?

Oak Trail Shores has no city government, so street authority depends on the road: local streets are a county matter, while FM 4 is controlled by the state. A utility bore in FM 4 right of way needs a TxDOT utility permit reviewed by the TxDOT Fort Worth District. The utility owner, not the drilling contractor, files in TxDOT’s RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. TxDOT rules require boring or tunneling beneath existing highway pavement. A Lake Granbury crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Oak Trail Shores, Hood County?

The water provider for the specific Oak Trail Shores address has to be confirmed with the county or the local water district before a bore is planned. Utilities reporting electric service in Hood County include Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and United Electric Cooperative Service. Those reports do not identify the provider at every Oak Trail Shores address, so we confirm the line owner before planning electric conduit along a street such as Oak Trail.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Hood CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Oak Trail Shores’ median housing year at 1984; 85 percent of units date from 1960 to 1999, and 14 percent from 2000 or later. A replacement service along Hilltop Road may need to connect with older buried lines rather than a new service route. Before the drill approaches a marked utility, we expose it with hydrovac potholing; paint shows position, not depth. For a line beneath Blueberry Trail, that means checking the actual crossing point before drilling close to it.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Oak Trail Shores near Granbury?

Oak Trail Shores is an unincorporated Hood County community with 2.54 square miles of land and an elevation of 805 feet. Its ZIP code is 76048. Stockton Bend is 4.2 miles east, Granbury is 5.2 miles southeast, and Horseshoe Bend is 6.9 miles northwest. Granbury is also the county seat and the nearest larger city listed, 5.2 miles southeast. From our Yukon, Oklahoma main office, the trip is 256 road miles and 5.2 hours by car, which affects mobilization for work near FM 4 or Oak Trail.

Places near Oak Trail Shores

What kinds of bores come up on Oak Trail in Oak Trail Shores?

  • Highway crossing: A bore beneath FM 4 keeps the line below the road surface and follows the TxDOT permit plan for the state highway.
  • Water service: A service route near Oak Trail can run beneath the street, with the provider and existing lines confirmed for the address first.
  • Fiber conduit: A fiber drop near Blueberry Trail can avoid an open cut across pavement when the route and marked utilities allow a bore.
  • Lake crossing: A proposed line near Lake Granbury needs a planned route that accounts for the channel and checks federal jurisdiction.
  • Replacement service: A new water or sewer connection near Hilltop Road may need to tie into older buried lines, so the crossing points need checking.
  • Electric conduit: A route along Briarwood Street starts with confirming the electric line owner, since several utilities report Hood County service.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Briarwood Street bore in Oak Trail Shores?

A map pin matters because a bore near Briarwood Street can meet different streets, utilities or ground than one near Lake Granbury. For work near Oak Trail, we need the address or pin, what is going in the ground, pipe or conduit size, and footage to plan the bore. A sketch or plans help us see the route and crossings before we scope the work.

Price depends on the route and what the Oak Trail Shores bore meets along the way. Brackett soil and shallow Glen Rose Limestone can change drilling time and tooling. Crossings of FM 4 or Lake Granbury add planning, and pavement, exposed utilities, pits, excavator time and sand backfill also affect the scope. The 256 road miles from Yukon can affect mobilization. Near Lake Granbury, we allow added planning when a crossing involves high profile or emergency work.

Questions people ask about boring in Oak Trail Shores

Does Trinity take directional boring work in Oak Trail Shores, Hood County?

Yes. We take directional boring work in Oak Trail Shores and serve Texas from our Yukon main office. Our own crews and partner drilling contractors Trinity has vetted can staff the work, with Trinity staying involved from the first call through the bore log. For a route near FM 4, we first need the location and line scope.

Who approves a bore under FM 4 in Oak Trail Shores?

FM 4 is a state highway, so a utility bore in its right of way needs a TxDOT utility permit reviewed by the TxDOT Fort Worth District. The utility owner files the application through RULIS, not the drilling contractor. We prepare the bore plan and profile for the owner’s filing and work under its permit.

Can you bore a line under Lake Granbury in Oak Trail Shores?

A bore may be planned for a route near Lake Granbury, which has 0.24 channel miles mapped inside Oak Trail Shores. The crossing needs an alignment that accounts for the channel and banks. During planning, the route is checked for U.S. Army Corps of Engineers jurisdiction, and the specific site conditions determine the bore design.

Who owns electric lines in Oak Trail Shores, Hood County, and who confirms conduit specs?

Several utilities report Hood County service: Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and United Electric Cooperative Service. Those county reports do not establish which company serves an Oak Trail Shores address. We confirm the line owner for the specific route, and that owner confirms the conduit requirements before a bore is planned.

Does the county control Blueberry Trail in Oak Trail Shores, and must it be cut?

Oak Trail Shores has no city government, so its local streets are a county matter; FM 4 is state controlled. A bore under Blueberry Trail can avoid cutting the street surface when the route and access allow. We pothole marked utilities on the bore path before drilling near them, since surface marks show position rather than depth.

Do older lines near Hilltop Road in Oak Trail Shores affect a replacement bore?

They can affect where the replacement route fits. The American Community Survey 2019 to 2023 estimates put the median housing year at 1984, with 85 percent of units built from 1960 to 1999. Near Hilltop Road, we check the planned crossing points and expose marked utilities before drilling close to existing lines.

How much notice does Texas811 need for an Oak Trail Shores bore on Oak Trail?

For a bore on Oak Trail, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For work near Blue Branch, if the start slips more than 14 days past the original notice, we make a new request. Worn or moved marks need refreshing through Texas811 before work continues.

How far is Oak Trail Shores from Granbury and Trinity’s Yukon main office?

Oak Trail Shores is 5.2 miles from Granbury and 256 road miles from our Yukon, Oklahoma main office, with a 5.2 hour drive listed. The Yukon distance can affect mobilization for a bore near Briarwood Street or Lake Granbury. We factor the trip into the job scope rather than treating it as a local office call.

What affects the price of directional boring near FM 4 in Oak Trail Shores?

The route, length and pipe or conduit size matter, along with Brackett soil and bedrock that may change drilling time. A crossing of FM 4, pavement, utilities that need exposing, pits, excavator time and backfill can add work. Lake Granbury or drainage crossings need planning too, and the distance from Yukon affects mobilization.

Where the Oak Trail Shores facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oak Trail Shores

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oak Trail Shores, Texas

Type the address of your job in Oak Trail Shores. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oak Trail Shores

Same county: Pecan Plantation · DeCordova · Cresson · Lipan. All counties: Texas county list.