Tolar Texas Directional Boring: Selden Soil, Comanche Creek and US 377
Quick Answer: On Tolar routes near Comanche Creek, we do directional boring, also called horizontal directional drilling (HDD), to put lines below crossings without opening the surface. From our Yukon, Oklahoma main office, the drive to Tolar is 260 road miles, and US 377 is one route a bore may need to pass. Selden soil is mapped across 37 percent of town, and sandy clay loam about 40 inches down can hold the hole while clinging to the reamer.
Tolar bores at a glance
- Incorporated city in Hood County, Texas. Population 1,339 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 260 miles, about 5.2 hours of driving.
- Ground: Selden soil is mapped on 37 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 21 percent of the area.
- Highways inside the boundary: US 377, FM 56, Texas State Highway 56 and FM 201. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: Fort Worth and Western Railroad and Fort Worth and Western Railroad (line shown as out of service), with 4 mapped street and rail crossings.
- Named streams inside the boundary: Comanche Creek.
- Public water: City of Tolar, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring in Tolar, Hood County?
From Yukon, Tolar is 260 road miles away, and our own crews and vetted partner drilling contractors handle work along US 377 and town streets. The Census Bureau Vintage 2024 estimate puts Tolar at 1,339 people in Hood County. We install water, sewer, gas, electric conduit and fiber beneath places such as 7th Street or toward Comanche Creek when the site plan calls for a crossing.
Our main office is in Yukon, Oklahoma, and Tolar work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line by 7th Street and a 48 inch casing crossing near US 377 show the size range we handle. Our family business began in 1965, and we have done directional boring since 1982; we bring that experience to planning in Tolar.

What is Selden soil like to bore through in Tolar?
The USDA soil survey maps Selden fine sand, with 1 to 5 percent slopes, across 37 percent of Tolar. Hassee fine sandy loam accounts for 13 percent, and Demona loamy sand for 12 percent. The surface is not the whole story: about 40 inches down, sandy clay loam is mapped under 37 percent of the area, while sandy clay is mapped under 21 percent. Those layers can change how the hole holds together, so a route near 7th Street needs a plan based on its actual ground, not just the surface texture.
| USDA soil survey, inside the Tolar city limits | What is mapped |
|---|---|
| Soil series mapped | Selden 37 percent, Hassee 13 percent, Demona 12 percent, Windthorst 8 percent and Sunev 6 percent |
| Texture at the surface | fine sand 37 percent, fine sandy loam 15 percent and loamy sand 12 percent |
| Texture about 40 inches down | sandy clay loam 37 percent, sandy clay 21 percent and bedrock 17 percent |
| Engineering class about 40 inches down | lean clay (CL) 71 percent and fat clay (CH) 12 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | 21 percent of the area (17 percent hard rock, 5 percent weathered rock) |
| Seasonal water table within 60 inches | 63 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 63 percent of the area |
The USDA soil survey maps bedrock within 40 inches under 17 percent of Tolar, and a seasonal water table within 40 inches under 63 percent. That can mean rock on some routes and water in pits on others. Flood prone soils are mapped under 5 percent, including ground to consider near Comanche Creek. High steel corrosion risk is mapped under 63 percent, so the line owner should consider casing and tracer wire materials. The mapped units include Quartz sand decomposition residuum of Cenozoic age and Glen Rose limestone of Albian age.
How do crews bore sandy clay loam in Tolar?
Tolar soil changes with depth, from Selden fine sand near the surface to sandy clay loam about 40 inches down. We adjust the drilling fluid and reaming steps to suit the ground along the route.
- Selden fine sand can cave behind the bit, so we use drilling fluid to support the hole and ream in stages on routes near Parkview Circle.
- Where Tolar’s sandy clay loam holds an open hole, sticky clay can build on the reamer; thinner fluid and a same day pull help manage the line.
- If a route meets Glen Rose limestone, a rock bit or other rock drilling setup may be needed; we track depth and pitch near Comanche Creek.
- Before drilling near a marked utility in Tolar, we hydrovac pothole it. At 7th Street, paint shows position, not depth, so we expose the line first.

What does a bore have to cross near Comanche Creek in Tolar?
US 377 runs through Tolar, along with FM 56, Texas State Highway 56 and FM 201. A bore in a state highway right of way needs a plan for the road and its pavement. The longer named streets also shape local routes: Parkview Circle has 0.88 miles mapped in town, Floyd Street has 0.86 miles and 7th Street has 0.75 miles. A route under one of these streets can keep the surface intact while the line passes below it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 377 | US highway | 1.1 roadway miles inside | State highway office |
| FM 56 | State highway | 0.5 roadway miles inside | State highway office |
| Texas State Highway 56 | State highway | 0.2 roadway miles inside | State highway office |
| FM 201 | State highway | 0.2 roadway miles inside | State highway office |
| Fort Worth and Western Railroad | Railroad | 0.97 track miles inside | The railroad |
| Fort Worth and Western Railroad (line shown as out of service) | Railroad | 0.24 track miles inside | The railroad |
| private or unidentified track (line shown as out of service) | Railroad nearby | 0.5 miles outside | The railroad |
| Comanche Creek | Stream | 1.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
The Fort Worth and Western Railroad has 0.97 track miles mapped in Tolar, plus 0.24 miles of track shown as out of service. Public records map 4 street and rail crossings in town, so a proposed route should be checked against the track. Comanche Creek runs for 1.08 channel miles, with 3 mapped street crossings of named streams in Tolar. A creek route needs depth planning, and its jurisdiction is checked during planning.
Do I need a permit to bore under US 377 in Tolar?
For a bore in the US 377 right of way, the utility owner files the application in TxDOT’s online RULIS system, not the drilling contractor. We prepare the bore plan and profile for that filing, and the TxDOT Fort Worth District reviews it. Electric and communication lines crossing a highway need 60 inches of cover below the lowest point of the crossed grade; water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. A Fort Worth and Western Railroad crossing also needs an agreement from the track owner. Tolar’s Comanche Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Tolar system in Tolar?
The City of Tolar public water system uses groundwater wells and reports 620 service connections serving 1,461 people. For electric service in Hood County, public records report Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service. Those reports do not identify the provider at every Tolar address, so we confirm the line owner before planning a conduit bore near the City of Tolar system.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Tolar | Public water system | Groundwater wells | 620 connections, 1,461 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Hood County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Tolar’s median housing year at 2003, context we consider when planning underground work. It estimates 10 percent of homes were built before 1960, 32 percent from 1960 to 1999 and 58 percent in 2000 or later. A replacement route near Floyd Street may meet older buried lines, while newer blocks may need a service extension. Before drilling near a marked utility, we expose it; along Floyd Street, paint shows where a line runs, not how deep it is.

How far is Tolar from Oak Trail Shores and our Yukon yard?
Tolar is in Hood County, at an elevation of 1,024 feet, and covers 1.11 square miles. ZIP code 76476 covers the city. Bluff Dale is 6.7 miles southwest, Oak Trail Shores is 8.5 miles northeast, and Granbury is 9.0 miles east. Granbury is also the county seat and the nearest larger city. The drive from our Yukon, Oklahoma main office is 260 road miles and 5.2 hours, which matters when planning equipment mobilization for a bore near US 377.
Places near Tolar
- Directional boring in Bluff Dale: 6.7 miles southwest
- Directional boring in Oak Trail Shores: 8.5 miles northeast
- Directional boring in Granbury: 9 miles east
- Directional boring in Canyon Creek: 10.5 miles east
- Directional boring in Stockton Bend: 11.1 miles northeast
What boring work comes up near Parkview Circle in Tolar?
- Highway crossing: A bore below US 377 needs a route and cover plan that accounts for highway pavement and the right of way.
- Street service: A water or sewer line can pass below Parkview Circle, keeping the street surface uncut while the route reaches a property.
- Creek crossing: A line routed below Comanche Creek needs depth planning and a jurisdiction check during design.
- Rail crossing: A proposed bore at the Fort Worth and Western Railroad needs the track owner’s crossing agreement before work is planned.
- Water service: A service route near the City of Tolar system starts with confirming the connection point and the line owner’s existing utilities.
- Fiber conduit: A conduit route along Floyd Street needs marked utilities exposed before the drill approaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near the Fort Worth and Western Railroad in Tolar?
A map pin matters near the Fort Worth and Western Railroad because the exact route determines whether the bore approaches a track or stays on a street such as Parkview Circle. Send the address, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route and crossings.
The job details drive the price. Ground conditions matter: Selden soil includes fine sand, and sandy clay loam is mapped about 40 inches down. Crossings matter too, including US 377, Comanche Creek and the Fort Worth and Western Railroad. Logistics include bore length, pipe size, utilities to expose, pavement, creek or drainage crossings, pits and excavator time. Tolar is 260 road miles from Yukon, so mobilization is also part of planning.
Questions people ask about boring in Tolar
Does Trinity Boring Solutions take directional boring jobs in Tolar, Hood County?
Yes. We take directional boring projects in Tolar and across Texas, planning each route around its specific conditions. Our own crews and partner drilling contractors we have vetted handle the work, while you deal with Trinity from the first call through the bore log. That applies to routes by 7th Street, US 377 or Comanche Creek.
When we plan directional boring in Tolar, who runs its public water system, and where does that water come from?
The City of Tolar runs the public water system, and the source is groundwater wells. Public records list 620 service connections serving 1,461 people. For a bore near the City of Tolar system, the connection point and existing lines need to be confirmed for the specific address.
Which electric line owners should I check in Hood County for a Tolar conduit bore?
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Hood County. That does not tell us which company serves a specific Tolar address. We confirm the line owner before planning a conduit bore near a street such as Floyd Street.
Who manages Tolar’s 7th Street, and can we bore without cutting it?
Because Tolar is incorporated, we account for city ownership when planning directional boring along its streets. Directional boring can pass a line beneath 7th Street without opening the street surface, subject to the route and site conditions. Marked utilities along the planned path must be exposed before the drill approaches them.
What do Tolar’s homes near Floyd Street tell us about replacement bores?
The American Community Survey 2019 to 2023 five year estimates put Tolar’s median housing year at 2003, with 10 percent of homes built before 1960. A replacement bore near Floyd Street may encounter existing buried lines, so we expose marked utilities before drilling close. The housing age alone does not establish the age of a particular pipe.
Can groundwater or flooding affect bore pits near Comanche Creek in Tolar?
It can. The USDA soil survey maps a seasonal water table within 40 inches under 63 percent of Tolar and flood prone soils under 5 percent. Near Comanche Creek, we plan pit placement and depth for local conditions, and creek crossing plans are checked for U.S. Army Corps of Engineers jurisdiction.
How early should I request a Tolar locate near Parkview Circle, and what if marks move?
For a bore near Parkview Circle, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. When a Tolar start slips more than 14 days past the original notice, we submit a new request before work begins. If marks are worn or moved along a Tolar route, we refresh them through Texas811 before directional boring continues.
Does Tolar’s distance from Granbury affect a bore scheduled from Yukon?
Granbury is 9.0 miles east of Tolar, but our main office is in Yukon, Oklahoma, 260 road miles away. That distance can affect equipment mobilization and the job schedule for work near US 377. We use our own crews and vetted partner drilling contractors, with Trinity handling the work from the first call through the bore log.
When we plan a directional bore beneath US 377 in Tolar, what local conditions affect its cost?
The route and scope set the price, including bore length, pipe or conduit size, soil and rock, and how many utilities must be exposed. US 377 adds highway crossing requirements, while the Fort Worth and Western Railroad or Comanche Creek can add crossing work. Pavement, pits, excavator time, emergency timing and the 260 road miles from Yukon also affect the job.
Where the Tolar facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Tolar
- U.S. Census Bureau, TIGER/Line 2024: Tolar boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Tolar
- U.S. Census Bureau, American Community Survey 2019 to 2023: Tolar housing units and year built
- Macrostrat geologic map compilation: map units under Tolar
- U.S. EPA Safe Drinking Water Information System: public water systems serving Tolar
- U.S. Department of Transportation, North American Rail Network: track owners in Hood County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hood County
- U.S. Geological Survey, Elevation Point Query Service: Tolar elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Tolar
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Tolar
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Tolar, Texas
Type the address of your job in Tolar. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Tolar
Same county: Pecan Plantation · DeCordova · Cresson · Lipan. All counties: Texas county list.
