trinityboringsolutions.com

Itasca Texas Directional Boring: Houston Black Clay, Union Pacific, Cottonwood Creek

Quick Answer: City of Itasca runs groundwater service, while Oncor Electric Delivery Company and other providers report service in Hill County, so we confirm line ownership before a bore under FM 934. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Itasca, including routes beneath Union Pacific tracks or city streets. Our Yukon, Oklahoma main office is 256 road miles away, a factor for work near Cottonwood Creek. Houston Black clay covers most mapped land and can grip pipe, so fluid and staged reaming matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Itasca bores at a glance

  • Incorporated city in Hill County, Texas. Population 1,885 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 256 miles, about 5 hours of driving.
  • Ground: Houston Black soil is mapped on 94 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: FM 934, Texas State Highway 81, FM 66, FM 67 and Spur 176. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: Union Pacific, with 6 mapped street and rail crossings.
  • Public water: City of Itasca, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Itasca, Hill County?

We take directional boring work in Itasca, an incorporated city in Hill County with a Census Bureau Vintage 2024 estimate of 1,885 residents. For Itasca underground work, we install water, sewer, gas, electric conduit, and fiber. Those lines may run beneath Files Street, Farm Road 934 or other city streets, where a bore can avoid opening the pavement. We confirm the route and existing utilities before drilling.

Our main office is in Yukon, Oklahoma, and Itasca work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982, supporting underground work in Itasca. With City of Itasca water lines and reported electric service already in the ground, our record of no utility strike in over 25 years makes careful locating and exposure central to each route.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Houston Black soil affect drilling in Itasca?

The USDA soil survey maps Houston Black soil across 94 percent of Itasca, with Heiden soil on 5 percent. Houston Black clay map units cover 70 percent of the area on 1 to 3 percent slopes and 23 percent on 0 to 1 percent slopes. The survey maps clay across the surface and at about 40 inches, with average clay content of 54 percent at that depth. For Itasca planning, we treat mapped soil patterns as context, not as test borings for a proposed route. The heavy clay can hold an open hole, stick to the reamer and grip pipe as it swells.

USDA soil survey, inside the Itasca city limitsWhat is mapped
Soil series mappedHouston Black 94 percent and Heiden 5 percent
Texture at the surfaceclay 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The soil survey maps bedrock within 60 inches in only 1 percent of the area, so bedrock is not mapped in the top five feet across most of Itasca. Seasonal water tables are not mapped within 60 inches, and flood prone soils cover 1 percent. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The mapped Eagle Ford Formation is Late Cretaceous shale, siltstone and limestone, which can mean slower drilling if a route meets rock.

What does it take to bore through clay in Itasca?

Houston Black clay can cling to the reamer and tighten around a pipe. On a route near Farm Road 934, we match the fluid and reaming sequence to the ground and keep the pullback ready.

  1. On Houston Black clay, we use a thinner drilling fluid and polymer, then ream in stages to limit sticky buildup around the reamer.
  2. Because heavy clay can hold a hole open and swell against pipe, we watch fluid returns near pavement and pull pipe the day the hole opens.
  3. We hydrovac expose marked utilities along a proposed Hill Street route before drilling near them; surface paint shows position, not depth.
  4. A walkover locator tracks the drill head as it advances beneath FM 934, while we record depth and pitch for the bore log.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a line go under Cottonwood Creek near Itasca?

FM 934, Texas State Highway 81, FM 66 and FM 67 run inside Itasca, while Interstate 35 is 0.4 miles outside the city limits. A highway route may need a bore beneath existing pavement rather than an open cut. Farm Road 934 is the longest named street in the city at 1.59 miles. Hill Street runs 1.13 miles, and Files Street runs 1.03 miles, giving planners several local streets to check against the proposed bore path.

CrossingTypeMapped extentWho has a say
FM 934State highway1.8 roadway miles insideState highway office
Texas State Highway 81State highway1.6 roadway miles insideState highway office
FM 66State highway1.4 roadway miles insideState highway office
FM 67State highway0.2 roadway miles insideState highway office
Spur 176State highway0.1 roadway miles insideState highway office
Interstate 35Highway nearby0.4 miles outsideState highway office
Union PacificRailroad1.17 track miles insideThe railroad
Cottonwood CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Coleman CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Walker CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.17 track miles inside Itasca, and public mapping shows 6 street and rail crossings. A route beneath the track needs the railroad owner’s crossing agreement. No named streams are mapped inside the city, but Cottonwood Creek and Coleman Creek are each 0.3 miles from the limits, and Walker Creek is 0.6 miles away. The city has 1.22 miles of unnamed drainage, so a route near a drainage feature needs a careful path review.

Who approves a bore near Union Pacific in Itasca?

For work in the right of way of FM 934, Texas State Highway 81, FM 66, FM 67 or nearby Interstate 35, the utility that owns the line files the TxDOT permit in RULIS. TxDOT’s Waco District reviews it; we give the utility the bore plan and profile and work under its permit. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest point of the crossed grade, and water lines need 60 inches. A Union Pacific track crossing needs an agreement from the railroad owner. A planned crossing of Cottonwood Creek is checked for federal waterway jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near City of Itasca lines?

The City of Itasca public water system uses groundwater wells and has 639 service connections serving 1,625 people. For electric work in Hill County, reported providers include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative. The provider can vary by address, so we confirm the line owner before planning conduit near the city water system or along FM 934.

Line ownerWhat it isSourceSize
City of ItascaPublic water systemGroundwater wells639 connections, 1,625 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Hill CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Itasca’s median housing year at 1973; 28 percent of homes were built before 1960, 40 percent from 1960 to 1999 and 32 percent in 2000 or later. A replacement bore along Hill Street may meet older service lines, but housing age alone does not identify their location or depth. Texas811 marks show position, not depth, so we hydrovac expose marked utilities before drilling near them.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Itasca in relation to Carl’s Corner?

Itasca is an incorporated city in Hill County, at an elevation of 690 feet and covering 1.24 square miles. Its ZIP code is 76055. Covington is 6.8 miles west, Carl’s Corner is 7.6 miles southeast, and Grandview is 7.8 miles north. Hillsboro, the county seat and nearest larger city, is 10.6 miles south. The Yukon, Oklahoma main office is 256 road miles away, a five hour drive, so mobilization is part of planning a bore in Itasca.

Places near Itasca

Which jobs call for a bore near Files Street in Itasca?

  • Highway crossing: A bore beneath FM 934 can keep a new line out of the existing road pavement.
  • Water service: A City of Itasca groundwater connection can be routed beneath a street without cutting its surface.
  • Fiber conduit: A route along Files Street can pass marked utilities after they are exposed before drilling.
  • Rail crossing: A bore beneath the Union Pacific track needs the railroad owner’s crossing agreement.
  • Creek crossing: A proposed route near Cottonwood Creek needs planning for the channel and a jurisdiction check.
  • Street replacement: A bore near Hill Street can carry replacement pipe while avoiding an open cut through the roadway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Front Street in Itasca?

For a route near Front Street, start with the address or a map pin. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help us see the route, nearby streets and any crossings before we scope the work.

Houston Black clay is the first pricing factor to sort out because it can cling to the reamer and grip the pipe. The scope also changes with bore length, pipe or conduit size, utilities to expose, pavement, pits and excavator time. A Union Pacific crossing or a route near Cottonwood Creek adds crossing details to plan. Mobilization matters too, with the Yukon office 256 road miles from Itasca.

Questions people ask about boring in Itasca

Does Trinity Boring Solutions take directional boring work in Itasca, Hill County?

Yes. We take directional boring work in Itasca, and our own crews or crews from vetted partner drilling contractors handle the field work. We coordinate the job through the bore log, including a route under Files Street or near the City of Itasca water system.

For Itasca underground planning, who runs the public water system, and where does its water come from?

The City of Itasca owns and runs the public water system, which draws from groundwater wells. Public records list 639 service connections serving 1,625 people. That system is a key locate to account for when planning a bore beneath FM 934 or a nearby city street.

Which electric company serves my Itasca address in Hill County, and who confirms conduit specs?

Electric providers reporting service in Hill County include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative. The provider is not established for every address, so we confirm the line owner and conduit requirements before planning a route near Files Street.

Who controls Itasca streets such as Files Street, and does a bore cut the road?

Because Itasca is incorporated, we account for city ownership when planning work along its streets. A directional bore beneath Files Street can avoid an open cut through the roadway. The route still needs utility locating and exposure, and work on a state highway such as FM 934 involves TxDOT.

Could older buried lines affect a replacement bore near Itasca’s Hill Street?

They could affect the route and locating plan. American Community Survey 2019 to 2023 estimates put the median housing year at 1973, with 28 percent of homes built before 1960. That does not date an individual line, so we expose marked utilities before drilling near Hill Street.

Does Houston Black soil in Itasca corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across Itasca, where Houston Black clay dominates. That is a reason for the line owner to consider casing and tracer wire materials. HDPE is not affected by this soil corrosion concern; the line owner selects the materials for the project.

How much Texas811 notice does an Itasca bore near Farm Road 934 need, and what if marks fade?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Itasca work, if the start slips more than 14 days past the original notice, we submit a new request. Refresh worn or moved marks through Texas811 before work continues near Farm Road 934.

How far is Itasca from the Yukon office, and does Hillsboro make a difference?

Itasca is 256 road miles and a five hour drive from our Yukon, Oklahoma main office. Hillsboro is 10.6 miles south and is the nearest larger city, but the Yukon distance can affect crew mobilization. We account for the actual route and access near the job, such as a crossing by FM 66.

What affects the cost of a directional bore in Itasca near FM 934?

The price depends on the work scope, not just footage. Houston Black clay, pipe size and bore length matter, as do the number of utilities to expose, pavement, pits and excavator time. A Union Pacific crossing or drainage near Cottonwood Creek can add planning needs, and mobilization from Yukon is another factor.

Where the Itasca facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Itasca

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Itasca, Texas

Type the address of your job in Itasca. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Itasca

Same county: Whitney · Hubbard · Blum · Abbott · Mount Calm · Malone · Penelope · Bynum · Mertens · Aquilla. All counties: Texas county list.