Rancho Alegre Texas Directional Boring: Clareville Loam, Lattas Creek and US 281 Bypass
Quick Answer: At Gulf Street, confirm the water provider; AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report in Jim Wells County, so verify the electric line owner before routing conduit. Trinity handles directional boring, or horizontal directional drilling (HDD), for crossings such as Lattas Creek. Rancho Alegre is 592 road miles from our Yukon, Oklahoma main office, making Beam Station Road mobilization part of the scope. At 40 inches, sandy clay loam under 52 percent of the mapped area can grip tooling, so crews control fluid and reaming.
Rancho Alegre bores at a glance
- Unincorporated community in Jim Wells County, Texas. Population 1,415 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 592 miles, about 11.5 hours of driving.
- Ground: Clareville soil is mapped on 29 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281 Bypass, US 281, FM 1554 and FM 2507. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Lattas Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near CPKC (Kansas City Southern) in Rancho Alegre?
The water provider for a specific Gulf Street address needs confirmation, and AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County. We verify the line owner before planning a conduit route near CPKC (Kansas City Southern). The 2020 Census count puts Rancho Alegre at 1,415 people. We install water, sewer, gas, electric conduit and fiber along routes such as McMaster Road.
Our main office is in Yukon, Oklahoma, and Rancho Alegre work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for the clay and sandy clay loam mapped around Clareville soil. Our family business began in 1965, and Trinity stays with the job from the first call through the bore log.

What ground should crews expect in Rancho Alegre near Clareville soil?
The USDA soil survey maps Clareville loam across 29 percent of Rancho Alegre, with Racombes sandy clay loam mapped across 15 percent. At about 40 inches below the surface, sandy clay loam makes up 52 percent of the mapped texture, while clay accounts for 19 percent. The survey also maps fine sandy loam at the surface across 36 percent of the area. For Rancho Alegre, we use mapped soil patterns as planning context, not as test borings. The clay rich layers can cling to a reamer, so crews should manage fluid and open the hole in stages.
| USDA soil survey, inside the Rancho Alegre mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Clareville 29 percent, Opelika 19 percent, Pharr 16 percent, Racombes 15 percent and Lattas 10 percent |
| Texture at the surface | fine sandy loam 36 percent, loam 29 percent and clay 19 percent |
| Texture about 40 inches down | sandy clay loam 52 percent, clay loam 29 percent and clay 19 percent |
| Engineering class about 40 inches down | fat clay (CH) 48 percent, lean clay (CL) 34 percent and clayey sand (SC) 18 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 21 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 31 percent of the area |
Across Rancho Alegre, we treat no bedrock mapped in the top five feet as no proof that deeper rock is absent. The USDA survey maps a seasonal water table within 60 inches across 21 percent of the area, so pits may need pumping. For Rancho Alegre crossings, we treat the absence of mapped flood prone soils as a map limitation, not a site conclusion. High steel corrosion risk covers 31 percent, a concern for casing and tracer wire that the line owner should address. The geologic map names the Pleistocene Lissie Formation and Chibanian Alluvium, both with mixed sediments that can vary along a route.
How do crews handle Rancho Alegre sandy clay loam?
The USDA survey maps sandy clay loam at about 40 inches across 52 percent of Rancho Alegre. We adjust fluid and reaming to the ground at the bore, including the clay rich layers mapped near Clareville soil.
- At the sandy clay loam mapped under 52 percent of Rancho Alegre at about 40 inches, we use thinner fluid and staged reaming to manage sticky cuttings.
- Where heavy clay is present near Clareville soil, we watch fluid returns closely so pressure does not lift pavement along Gulf Street.
- The seasonal water table mapped within 60 inches across 21 percent of the area can fill pits, so we plan small pits and pumping near Lattas Creek.
- Before drilling near a marked line on McMaster Road, we hydrovac expose it; surface paint shows its position but not its depth.

What is in the way of a new line in Rancho Alegre near US 281 Bypass?
US 281 Bypass and US 281 each run through Rancho Alegre, alongside FM 1554 and FM 2507. Texas State Highway 359 and Texas State Highway 44 are each 0.1 miles outside the mapped community boundary. The longer local routes include Gulf Street at 0.86 miles, McMaster Road at 0.78 miles and Beam Station Road at 0.48 miles. Those roads shape access and crossing locations. A bore can pass beneath pavement without cutting it, subject to the right of way permit and its conditions.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 Bypass | US highway | 0.4 roadway miles inside | State highway office |
| US 281 | US highway | 0.4 roadway miles inside | State highway office |
| FM 1554 | State highway | 2.3 roadway miles inside | State highway office |
| FM 2507 | State highway | 0.3 roadway miles inside | State highway office |
| Texas State Highway 359 | Highway nearby | 0.1 miles outside | State highway office |
| Texas State Highway 44 | Highway nearby | 0.1 miles outside | State highway office |
| US 281 Business | Highway nearby | 0.2 miles outside | State highway office |
| CPKC (Kansas City Southern) | Railroad nearby | 0.1 miles outside | The railroad |
| Lattas Creek | Stream | 2.42 channel miles inside | Checked for Corps of Engineers jurisdiction |
| San Diego Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
The CPKC (Kansas City Southern) railroad is 0.1 miles outside Rancho Alegre, and no street and rail crossing is mapped inside the community. Any route that reaches the track needs an agreement from the railroad owner. Lattas Creek runs for 2.42 channel miles inside the community, and four street crossings of named streams are mapped. Creek work needs depth planning and a jurisdiction check during planning. With no lakes or ponds mapped within one mile of Rancho Alegre, we still plan each crossing for its route conditions.
Who approves a bore in Rancho Alegre in Jim Wells County?
Rancho Alegre is unincorporated, so it has no city government to approve work on streets such as Gulf Street or Beam Station Road. County or state authority depends on the route. For work in the right of way of US 281 Bypass, US 281, FM 1554 or FM 2507, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Corpus Christi District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under its permit. A CPKC track crossing needs the railroad owner’s agreement. Lattas Creek crossings are checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Rancho Alegre in Jim Wells County?
EPA drinking water records do not tie water systems to towns in Texas, so the water provider for a specific Gulf Street address has to be confirmed with Jim Wells County or the local water district before a bore is planned. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County. That does not identify the electric owner at every Beam Station Road address, so we confirm the owner and conduit requirements before setting the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Jim Wells County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Rancho Alegre’s median housing year at 1968, context we use when planning underground work. For Rancho Alegre, we use housing estimates in planning: 13 percent before 1960, 73 percent from 1960 to 1999, and 14 percent in 2000 or later. Those dates do not establish the age of buried lines. A replacement route near McMaster Road may meet existing services, so we hydrovac expose marked utilities before drilling near them; paint shows position, not depth.

Where is Rancho Alegre in relation to Alice?
Rancho Alegre is an unincorporated community in Jim Wells County, at an elevation of 223 feet and covering 1.28 square miles. ZIP code 78332 serves the area. Alice Acres is 1.9 miles south, while Alice is 2.5 miles northeast and is both the county seat and the nearest larger city. Coyote Acres is 2.7 miles southwest. From our Yukon, Oklahoma main office, the drive is 592 road miles and 11.5 hours. That distance is part of planning crew mobilization for a route near FM 1554.
Places near Rancho Alegre
- Directional boring in Alice Acres: 1.9 miles south
- Directional boring in Alice: 2.5 miles northeast
- Directional boring in Coyote Acres: 2.7 miles southwest
- Directional boring in Ben Bolt: 5.1 miles south
- Directional boring in Loma Linda East: 5.9 miles west
What kinds of bores come up around Rancho Alegre and Beam Station Road?
- Highway crossing: A bore beneath US 281 Bypass keeps the line below the travel lanes and avoids cutting existing pavement.
- Water service: A new service along Gulf Street needs the address specific water provider confirmed before its route is planned.
- Fiber conduit: A route near FM 1554 can be bored beneath pavement, with marked utilities exposed before the drill approaches.
- Creek crossing: A Lattas Creek bore needs a planned depth below the channel and a jurisdiction check during planning.
- Rail crossing: A route reaching CPKC (Kansas City Southern) needs the railroad owner’s agreement before the track is crossed.
- Street replacement: A line near McMaster Road can pass under pavement while crews pothole marked utilities along the planned path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring in Rancho Alegre near Gulf Street?
For a Gulf Street quote, start with the address or map pin. Tell us what is going in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help us see the route toward Beam Station Road and spot likely crossings before we set the work scope.
In Rancho Alegre, soil and crossing exposure matter first: clay rich ground near Clareville soil can call for staged reaming, while Lattas Creek or US 281 Bypass adds crossing planning. Pipe or conduit size and bore length also shape the work. Pavement, utility exposures, pits and excavator time affect the setup. Mobilization matters because Rancho Alegre is 592 road miles from Yukon. For high profile or emergency work in Rancho Alegre, we account for added planning needs before proceeding with the crossing.
Questions people ask about boring in Rancho Alegre
Does Trinity Boring Solutions take directional boring work in Rancho Alegre and Jim Wells County?
Yes. We take directional boring work in Rancho Alegre and across Texas, planning each crossing around its site conditions. The main office is in Yukon, and crews work from there or from satellite yards operated by vetted partner drilling contractors. For a route near US 281 Bypass, you work with Trinity from the first call through the bore log, regardless of which crew is on site.
Can a line be bored beneath Lattas Creek in Rancho Alegre?
A bore beneath Lattas Creek can be planned, with the route and depth set for the crossing. The creek has 2.42 channel miles inside Rancho Alegre, and four street crossings of named streams are mapped. During Rancho Alegre crossing planning, we check whether the route falls under US Army Corps of Engineers jurisdiction.
Who owns electric lines in Rancho Alegre and Jim Wells County, and who confirms conduit specs?
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County, but that does not establish the owner at a specific address. Before planning a conduit bore near FM 1554, we confirm the line owner and its conduit specifications for that route.
Who controls Beam Station Road in Rancho Alegre, and does a bore require cutting it?
Rancho Alegre has no city government, so street authority rests with the county or state rather than a town government. A bore along Beam Station Road can pass beneath the pavement without an open cut. The authority for the specific right of way and any required approval depends on the route.
How old are houses and buried lines near McMaster Road in Rancho Alegre?
The American Community Survey 2019 to 2023 estimates place the median housing year at 1968, but that does not date buried utilities. A replacement bore near McMaster Road may cross existing services. We use Texas811 marks and hydrovac potholing to expose marked lines before drilling close to them.
Could groundwater or flooding affect bore pits near Lattas Creek in Rancho Alegre?
Groundwater can affect some pits: the USDA soil survey maps a seasonal water table within 60 inches across 21 percent of Rancho Alegre. For Rancho Alegre crossings, we treat the absence of mapped flood prone soils as a map limitation, not a site conclusion. Near Lattas Creek, crews still plan the crossing depth for the channel and can use small pits and pumping where wet ground calls for it.
Does Trinity cover Alice Acres and rural sites outside Rancho Alegre?
Yes. We take work in Alice Acres, which is 1.9 miles south of Rancho Alegre, and at rural sites outside the mapped community boundary. The Yukon main office is 592 road miles away, so the address, route and scope help us plan mobilization for jobs near Alice or FM 1554.
How much notice does Texas811 need for a bore near Gulf Street in Rancho Alegre?
Texas811 needs a locate request at least 48 hours before excavation, not counting weekends or legal holidays, and the request cannot be made earlier than 14 days before work. If a Gulf Street start slips more than 14 days past the original notice, submit a new request. If marks are worn or moved along a Rancho Alegre crossing, we refresh them before continuing work.
What affects the cost of a Rancho Alegre bore near US 281 Bypass?
For Rancho Alegre boring work, we set pricing according to the job scope established for the crossing. Soil conditions around Clareville soil, crossing exposure at US 281 Bypass, pipe size and bore length all affect the work. Pavement, utility potholing, pits, excavator time and backfill can add to the scope. Mobilization also matters because Rancho Alegre is 592 road miles from Yukon.
Where the Rancho Alegre facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Rancho Alegre
- U.S. Census Bureau, TIGER/Line 2024: Rancho Alegre boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Rancho Alegre population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Rancho Alegre housing units and year built
- Macrostrat geologic map compilation: map units under Rancho Alegre
- U.S. Department of Transportation, North American Rail Network: track owners in Jim Wells County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: Rancho Alegre elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Rancho Alegre
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Rancho Alegre
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Rancho Alegre, Texas
Type the address of your job in Rancho Alegre. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Rancho Alegre
Same county: Premont · Orange Grove · San Diego · Sandia · Westdale · K-Bar Ranch · South La Paloma · Amargosa · Owl Ranch · Alfred. All counties: Texas county list.
