South Fork Estates Texas Directional Boring: Nueces Soil, FM 3073 and Arroyo de Maqueyes
Quick Answer: Along Los Lobos Boulevard and Arroyo de Maqueyes, Trinity does directional boring, or horizontal directional drilling (HDD), in South Fork Estates, Texas. Siesta Street is among 10.9 public road miles inside the mapped community, 639 road miles from our Yukon yard. USDA maps 52% fine sand at the surface, which can cave behind the bit and calls for staged reaming. Arroyo de Maqueyes has 2.93 channel miles here, so a nearby route needs crossing review.
South Fork Estates bores at a glance
- Unincorporated community in Jim Hogg County, Texas. Population 136 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 639 miles, about 12.8 hours of driving.
- Ground: Nueces soil is mapped on 52 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 3073 and Texas State Highway 16. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Arroyo de Maqueyes.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring in South Fork Estates along FM 3073?
South Fork Estates is an unincorporated census designated place in Jim Hogg County, with 136 people in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. We take water, sewer, gas, electric conduit and fiber routes along FM 3073, Texas State Highway 16 and streets such as Los Lobos Boulevard, where open trenching could disrupt access.
Our main office is in Yukon, Oklahoma, and South Fork Estates work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For directional boring planning near Encino Avenue, our family business began in 1965, and we have done directional boring since 1982. Four decades of boring help us plan for the fine sand and sandy clay loam mapped around South Fork Estates, where hole support and staged reaming matter.

What is South Fork Estates ground like around Nueces soil?
The USDA soil survey maps the Nueces series across 52% of South Fork Estates, with Delmita at 33%, Comitas at 10% and Delfina at 5%. At the surface, fine sand covers 52% of the mapped area, loamy fine sand 30%, and fine sandy loam 18%. About 40 inches down, sandy clay loam is mapped under 56% of the area, while cemented material is mapped under 33%. The survey reports average clay content of 25% at that depth. Around Los Lobos Boulevard, the mapped Nueces, Delmita, Comitas, and Delfina soil patterns are reference information, not test borings.
| USDA soil survey, inside the South Fork Estates mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Nueces 52 percent, Delmita 33 percent, Comitas 10 percent and Delfina 5 percent |
| Texture at the surface | fine sand 52 percent, loamy fine sand 30 percent and fine sandy loam 18 percent |
| Texture about 40 inches down | sandy clay loam 56 percent, cemented material 33 percent and fine sandy loam 10 percent |
| Engineering class about 40 inches down | clayey sand (SC) 56 percent and silty clayey sand (SC SM) 10 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
USDA mapping does not place bedrock within the top five feet; that supports a soil focused plan without ruling out deeper rock. Seasonal water table and flood prone soils are not mapped, so those concerns are not indicated by this survey, while a route at Arroyo de Maqueyes still needs channel planning. When planning a crossing near Arroyo de Maqueyes, we do not see high steel corrosion risk mapped. Geology includes Holocene sand sheet, wind blown deposits about 0.5 to 5 m thick in the southeast, plus Pliocene sedimentary material. The sand can cave behind a bit, making fluid support and staged reaming useful.
How do crews handle South Fork Estates sandy clay loam?
The Nueces and Delmita mapping points to sandy surface material over sandy clay loam or cemented material. We set the plan for the exact route and check the changing ground as the drill head advances.
- Before drilling near a marked utility on an FM 3073 bore path, we expose it by hydrovac; surface paint shows position, not depth.
- Where fine sand is mapped near Los Lobos Boulevard, drilling fluid supports the hole, and staged reaming helps manage ground that can slough behind the bit.
- About 40 inches down, sandy clay loam is common in the survey; we adjust the reaming sequence to the material and watch the fluid returns.
- For a proposed service crossing Siesta Street, a walkover locator tracks the drill head from the surface as we log depth and pitch.

What is in the way of a new line in South Fork Estates near Los Lobos Boulevard?
FM 3073 and Texas State Highway 16 run inside the mapped community boundary, with 4.0 mapped roadway miles of FM 3073 and 3.3 of Highway 16. Los Lobos Boulevard is the longest named street at 0.92 mile; Falcon covers 0.47 mile and Siesta Street 0.4 mile. Encino Avenue adds 0.28 mile. A bore can pass below pavement rather than opening the route, but launch and receiving pits still need workable space off the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 3073 | State highway | 4 roadway miles inside | State highway office |
| Texas State Highway 16 | State highway | 3.3 roadway miles inside | State highway office |
| Arroyo de Maqueyes | Stream | 2.93 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the community or within one mile, so no mapped track crossing shapes a route here. The records show no mapped street and rail crossing. Arroyo de Maqueyes runs 2.93 channel miles through South Fork Estates, and four mapped street crossings of named streams occur within the community. For a crossing near FM 3073, no lakes or ponds are mapped within one mile in South Fork Estates. A route near the arroyo needs planning around the channel.
Who has to sign off on South Fork Estates work in Jim Hogg County?
South Fork Estates has no city government, so street authority rests with Jim Hogg County or the state, depending on the road. For work in the FM 3073 or Texas State Highway 16 right of way, TxDOT utility cover depths shape the bore: electric and communication crossings need 60 inches below the lowest crossed grade, while lines running along the right of way need 48 inches. The utility owner files through RULIS, with the TxDOT Pharr District reviewing it; we prepare the bore plan and profile. TxDOT requires boring or tunneling beneath existing Texas State Highway 16 pavement, and we plan the crossing accordingly.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already in the ground in South Fork Estates, Jim Hogg County?
EPA drinking water records do not tie systems to towns here, so the water provider for a specific South Fork Estates address must be confirmed with the county or local water district before a bore is planned. AEP Texas Central and Medina Electric Cooperative report electric service in Jim Hogg County, but that does not identify the provider at every address. We confirm the line owner before planning an electric conduit bore near FM 3073 or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and Medina Electric Cooperative | Electric utilities reporting service in Jim Hogg County | EIA Form 861 | Confirm the line owner by address |
Housing data is not published reliably for a place this small, so a route near Siesta Street may involve a service run rather than a block wide replacement. Lines can follow FM 3073 or Texas State Highway 16, and the wettest month averages 4.5 inches of rain in September, compared with 0.9 inches in February. For a new service beneath Siesta Street, hydrovac potholing can expose marked utilities along the planned path before the drill approaches.

Do you cover South Fork Estates near Hebbronville?
South Fork Estates is in Jim Hogg County and covers 3.35 square miles at an elevation of 599 feet. ZIP code 78361 serves the community. Thompsonville is 3.8 miles west, and Hebbronville, the county seat, is 4.5 miles northeast; Las Lomitas is 6.0 miles northeast. The larger city of Zapata is 41.7 miles southwest. Our Yukon, Oklahoma yard is 639 road miles away, a 12.8 hour drive, so travel and mobilization factor into planning work along Los Lobos Boulevard or FM 3073.
Places near South Fork Estates
- Directional boring in Thompsonville: 3.8 miles west
- Directional boring in Hebbronville: 4.5 miles northeast
- Directional boring in Las Lomitas: 6 miles northeast
- Directional boring in Bruni: 12.8 miles northwest
- Directional boring in Realitos: 17 miles northeast
- Directional boring in Zapata: 41.7 miles southwest
What kinds of bores come up in South Fork Estates near Siesta Street?
- Highway crossing: A bore beneath FM 3073 needs a route and pits planned around the state highway right of way and pavement.
- Water service: A new service along Encino Avenue needs the address specific water provider confirmed before the route is set.
- Fiber conduit: A fiber run near Siesta Street can be bored below pavement, with marked utilities exposed before the drill approaches.
- Creek crossing: A line near Arroyo de Maqueyes needs a channel crossing plan and jurisdiction review during planning.
- Electric conduit: A conduit route near Texas State Highway 16 starts with confirming the electric line owner for the address.
- Street service: A route beneath Los Lobos Boulevard can avoid opening the street surface, with pits placed off the traveled way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for South Fork Estates work near Encino Avenue?
Start with the address or map pin, such as a spot along Encino Avenue. For a project on Siesta Street, tell us what will go underground, the pipe or conduit size, and the footage. A sketch or plans help show whether the route approaches FM 3073, Arroyo de Maqueyes or another crossing, so we can review the actual path.
A short, direct route near Encino Avenue with clear access is simpler to plan than a bore with several crossings. Price factors include length, pipe or conduit size, soil, exposed utilities, pavement, creek crossings, pits, excavator time and backfill. The fine sand mapped in South Fork Estates may call for added hole support; a crossing at FM 3073 adds permit planning, and the 639 road miles from Yukon affect mobilization.
Questions people ask about boring in South Fork Estates
Does Trinity take directional boring jobs in South Fork Estates, Jim Hogg County, and who staffs them?
Yes. Trinity takes directional boring work in Jim Hogg County, including South Fork Estates. Our Yukon main office coordinates the job, and our own crews or crews from vetted partner drilling contractors handle field work. You work with Trinity through the bore log, and the 639 road mile trip from Yukon is part of mobilization planning.
Who is responsible for Siesta Street in South Fork Estates, and does it have to be cut?
South Fork Estates has no city government, so Siesta Street is under county authority rather than a city street department. A directional bore can place a line beneath the street without opening its surface. The route still needs room for entry and exit pits, and marked utilities must be exposed before drilling near them.
What ground should I expect for a bore through Nueces soil in South Fork Estates?
The USDA soil survey maps Nueces across 52% of South Fork Estates. About 40 inches down, sandy clay loam is mapped under 56% of the area, while the surface is commonly fine sand. Loose sand can cave behind the drill, so fluid support and staged reaming help keep the hole open.
Can we expect a bore beneath FM 3073 in South Fork Estates to hit rock?
For a bore along Falcon in South Fork Estates, bedrock is not mapped in the top five feet, though that does not rule out deeper rock. The geologic map identifies Holocene sand sheet and Pliocene sedimentary material. The mapped sand can be loose, so the starting concern is supporting the bore rather than assuming a shallow rock layer.
Who approves a South Fork Estates bore under FM 3073?
TxDOT reviews utility work in the FM 3073 right of way through its Pharr District. The utility owner submits the application in RULIS, using a bore plan and profile prepared for the route. TxDOT requires boring or tunneling beneath existing highway pavement, and its permit sets the applicable crossing conditions.
Can a line be bored under Arroyo de Maqueyes in South Fork Estates?
A bore can be planned beneath Arroyo de Maqueyes, but the route needs to account for the channel and be checked for U.S. Army Corps of Engineers jurisdiction during planning. The stream has 2.93 channel miles inside the mapped community, and four mapped street crossings of named streams occur there.
How much Texas811 notice does a South Fork Estates bore near Los Lobos Boulevard need?
For work near Los Lobos Boulevard, plan the Texas811 request around the 20 day ticket life. Make the request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a start near La Escuadra Street slips more than 14 days past the original notice, we make a new request to the TxDOT Pharr District. Refresh worn or moved marks through Texas811 before continuing.
How far is South Fork Estates from Zapata and Trinity’s Yukon office?
Zapata is 41.7 miles southwest of South Fork Estates. Trinity’s Yukon, Oklahoma main office is 639 road miles away, a 12.8 hour drive. That distance affects mobilization for a bore near FM 3073, so we factor travel into the job plan along with access, footage and crossing requirements.
What affects the cost of a directional bore in South Fork Estates near FM 3073?
Length, line size, ground conditions and crossings shape the price. Fine sand mapped in South Fork Estates can require fluid support and staged reaming, while work in the FM 3073 right of way adds permit planning. Pavement, exposed utilities, creek crossings, pit work and mobilization from the Yukon yard also affect the scope.
Where the South Fork Estates facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside South Fork Estates
- U.S. Census Bureau, TIGER/Line 2024: South Fork Estates boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: South Fork Estates population count
- Macrostrat geologic map compilation: map units under South Fork Estates
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Hogg County
- U.S. Geological Survey, Elevation Point Query Service: South Fork Estates elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to South Fork Estates
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in South Fork Estates
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in South Fork Estates, Texas
Type the address of your job in South Fork Estates. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for South Fork Estates
Same county: Guerra. All counties: Texas county list.
