Sealy Texas Directional Boring: Katy Soil, Allens Creek and BNSF Railway
Quick Answer: City of Sealy owns the groundwater water system, while four electric utilities report service in Austin County, so we confirm the line owner before a conduit bore near Meyer Street. We do directional boring, also called horizontal directional drilling (HDD), for routes beneath Interstate 10 and other Sealy crossings. The Yukon main office is 446 road miles away, a distance that matters for work near Allens Creek. Katy soil and sandy clay loam over clay call for controlled fluid and staged reaming.
Sealy bores at a glance
- Incorporated city in Austin County, Texas. Population 7,553 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 446 miles, about 8.8 hours of driving.
- Ground: Katy soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10, US 90, Texas State Highway 36, FM 2187 and FM 3538. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: BNSF Railway and Union Pacific, with 31 mapped street and rail crossings.
- Named streams inside the boundary: Allens Creek, Little Bernard Creek and Bollingers Creek.
- Public water: City of Sealy, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Allens Creek in Sealy?
We take directional boring work in Sealy, Austin County, where the Census Bureau Vintage 2024 estimate puts the population at 7,553. Our crews install water, sewer, gas, electric conduit and fiber for routes along Meyer Street, Ward Bend Road or beneath Allens Creek. Naming the line and its route helps us plan the bore around the streets and creek crossings that are actually in the way.
Our main office is in Yukon, Oklahoma, and Sealy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored directionally since 1982, building on a family business started in 1965. Four decades of boring matter around Sealy’s sandy soils and clay below, where the hole needs a plan that holds its shape without driving fluid pressure too high.

What kind of ground should I expect in Sealy near Katy soil?
The USDA soil survey maps Katy soil across 30 percent of Sealy, with Wockley at 23 percent and Hockley at 18 percent. Fine sandy loam is the surface texture across 58 percent of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped under 53 percent, clay loam under 30 percent and clay under 11 percent. Those patterns point to a bore that can meet sticky clay below a looser surface, so the fluid and reaming plan must suit the changing ground.
| USDA soil survey, inside the Sealy city limits | What is mapped |
|---|---|
| Soil series mapped | Katy 30 percent, Wockley 23 percent, Hockley 18 percent, Monaville 11 percent and Cyfair 4 percent |
| Texture at the surface | fine sandy loam 58 percent, loamy fine sand 30 percent and loam 4 percent |
| Texture about 40 inches down | sandy clay loam 53 percent, clay loam 30 percent and clay 11 percent |
| Engineering class about 40 inches down | lean clay (CL) 77 percent, clayey sand (SC) 11 percent and fat clay (CH) 9 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 52 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 57 percent of the area |
USDA soil data show no bedrock mapped within 60 inches in Sealy, but the geologic map identifies Alluvial Sand, Silt, And Clay of Chibanian age, so deeper material can still vary. A seasonal water table is mapped within 60 inches across 52 percent of the area, which can leave pits wet. For Sealy, we plan around the fact that flood prone soils are not mapped, rather than treating the absence of a map as a site condition. High steel corrosion risk covers 57 percent, so the line owner should select steel protection; HDPE avoids that steel concern.
How do we drill Sealy’s sandy clay loam while accounting for its stated texture during bore planning?
Sealy’s fine sandy loam surface and sandy clay loam below call for a bore plan that changes with the ground. We watch returns and keep the hole stable as the drill passes between soil layers.
- Katy soil has a fine sandy loam surface, but Sealy’s mapped sandy clay loam below can hold the hole and grip pipe, so we use staged reaming and manage fluid.
- With a seasonal water table mapped within 60 inches across 52 percent of Sealy, we keep pits small and pump water where needed, especially near Allens Creek.
- We expose every marked utility with hydrovac potholing before drilling near it; for example, a marked line along Meyer Street is exposed because paint does not show depth.
- As the drill crosses Sealy’s sandy and clay layers, a walkover locator tracks the head and we log depth and pitch so the route stays controlled.

What is in the way of a new line near Ward Bend Road in Sealy?
Interstate 10 and US 90 each have 14.7 mapped roadway miles inside Sealy, making highway right of way a major route consideration. Texas State Highway 36 adds 6.0 miles, while FM 2187 has 3.7 miles. The longest named streets include Ward Bend Road at 3.23 miles, Meyer Street at 2.84 miles and Eagle Lake Road at 2.61 miles. A route on any of these roads needs a site specific crossing plan, not just a line on a map.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 14.7 roadway miles inside | State highway office |
| US 90 | US highway | 14.7 roadway miles inside | State highway office |
| Texas State Highway 36 | State highway | 6 roadway miles inside | State highway office |
| FM 2187 | State highway | 3.7 roadway miles inside | State highway office |
| FM 3538 | State highway | 3.3 roadway miles inside | State highway office |
| FM 1094 | State highway | 1.7 roadway miles inside | State highway office |
| FM 3013 | State highway | 1.2 roadway miles inside | State highway office |
| FM 1458 | State highway | 0.4 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 9.85 track miles inside | The railroad |
| Union Pacific | Railroad | 5.46 track miles inside | The railroad |
| Allens Creek | Stream | 2.7 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Bernard Creek | Stream | 0.57 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bollingers Creek | Stream | 0.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hog Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 9.85 track miles in Sealy, and Union Pacific has 5.46. The map shows 31 street and rail crossings in the city, so a route near either owner’s tracks needs its crossing requirements checked. Allens Creek runs 2.7 channel miles inside the limits; 11 mapped street crossings intersect named streams. Little Bernard Creek, Bollingers Creek and Lake Virnau also make water features relevant to route planning.
Do I need a permit to bore under Interstate 10 in Sealy?
A crossing of Interstate 10 sets the required cover: electric and communication lines need 60 inches below the lowest crossed grade, while water needs 60 inches and pressurized sewer needs 60 inches. Along the right of way, the respective cover depths are 48 inches, 36 inches and 60 inches for pressurized sewer at crossings. The line owner, not the drilling contractor, files for a TxDOT utility permit in RULIS; the TxDOT Yoakum District reviews it. We prepare the bore plan and profile for the utility owner’s application with Sealy’s mapped Alluvial Sand, Silt, And Clay of Chibanian age in view.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Sealy water system?
The City of Sealy public water system uses groundwater wells and has 3,787 service connections serving 6,839 people. That makes water lines a key locate and potholing concern along streets such as Meyer Street. CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric Cooperative report electric service in Austin County. We identify the electric line owner before planning a conduit bore, since the countywide providers do not establish which utility serves a particular address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Sealy | Public water system | Groundwater wells | 3,787 connections, 6,839 people served |
| CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric Cooperative | Electric utilities reporting service in Austin County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Sealy’s median housing year at 1987; 17 percent of housing was built before 1960, and 27 percent from 2000 onward. That mix can mean either replacement work on older streets or new service connections. Before the drill approaches a marked line, we expose it with hydrovac potholing. A locate mark beside Meyer Street shows position, not depth, so the actual line needs to be exposed.

Do you cover Sealy and nearby San Felipe?
Sealy is in Austin County, sits at 181 feet elevation and covers 11.72 square miles. Its ZIP code is 77474. San Felipe is 4.0 miles northeast, and South Frydek is 5.5 miles east; Fulshear, the nearest larger city, is 17.3 miles east. Bellville, the county seat, is 13.9 miles northwest. From our Yukon, Oklahoma main office, Sealy is 446 road miles away and about 8.8 hours by car, so distance is part of planning mobilization for a job near Interstate 10.
Places near Sealy
- Directional boring in San Felipe: 4 miles northeast
- Directional boring in South Frydek: 5.5 miles east
- Directional boring in Brazos Country: 7.5 miles east
- Directional boring in Wallis: 10.9 miles southeast
- Directional boring in Pattison: 11.8 miles east
- Directional boring in Fulshear: 17.3 miles east
What boring work comes up on Meyer Street in Sealy?
- Water service: A connection from the City of Sealy system along Meyer Street needs a route checked against existing water lines before drilling.
- Highway crossing: A new line beneath Interstate 10 needs a bore planned for the required cover and the full roadway crossing.
- Fiber conduit: A run near Ward Bend Road can stay beneath the road surface, with marked utilities exposed before the drill approaches.
- Creek crossing: A route beneath Allens Creek needs depth planned around the channel and a jurisdiction check during planning.
- Rail crossing: A bore beneath BNSF Railway needs the railroad owner’s agreement for casing, depth and flagging.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near BNSF Railway in Sealy?
A map pin matters near BNSF Railway because the exact track location changes the crossing plan. Send the Sealy address or pin, what goes in the ground, pipe or conduit size and footage. A sketch or plans help us see how the route relates to Ward Bend Road, the tracks or a creek before we scope the work.
The job itself sets the price. A shorter route through Sealy’s sandy clay loam may be simpler than one needing staged reaming through clay. Pipe size, footage, marked utilities to expose, pavement, pits, backfill and creek crossings all affect the work. A BNSF Railway crossing adds coordination with the track owner. The 446 road miles from Yukon also affect mobilization, while emergency or high profile work can require a different scope.
Questions people ask about boring in Sealy
Does Trinity Boring Solutions take directional boring jobs in Sealy, Austin County?
Yes. We take directional boring work in Sealy and handle it through our own crews or partner contractor crews from satellite yards. We stay involved from the first call through the bore log for Sealy, regardless of which crew is at the site. For a route near Meyer Street, send the location and line details so we can plan the scope.
Will groundwater near Allens Creek make Sealy bore pits difficult?
It can affect pit work. Sealy’s soil survey maps a seasonal water table within 60 inches across 52 percent of the area, so pits may need pumping. Allens Creek is a local channel crossing, and we plan pit placement and bore depth with that water and channel setting in mind.
Does Katy soil in Sealy corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 57 percent of Sealy, so the line owner should choose any coating for steel casing or tracer wire. For Sealy bores, we use HDPE without the steel corrosion concern, keeping that material distinction clear in the bore plan. Katy soil is common in the area, but the survey pattern is not a site test, so the actual route still needs evaluation.
What ground will a directional bore pass through in Sealy’s Katy soil?
The surface is often mapped as fine sandy loam, and Katy is the leading soil series at 30 percent of Sealy. At about 40 inches, sandy clay loam is mapped under 53 percent of the area. That transition can make the bore move from looser surface soil into clay that holds the hole and can grip the pipe.
Will a bore in Sealy hit rock below the mapped Alluvial Sand, Silt, And Clay of Chibanian age?
The USDA soil survey maps no bedrock within the top 60 inches in Sealy, so shallow bedrock is not indicated. We use Sealy’s geologic map of Alluvial Sand, Silt, And Clay of Chibanian age to describe mapped material, not conditions deeper along a bore.
Who approves a bore under Interstate 10 in Sealy?
The utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Yoakum District reviews it. The owner submits the application; we prepare the bore plan and profile. Interstate 10 crossings also need the applicable cover and boring requirements addressed in the permit plan.
Does Sealy’s distance from Yukon change a job near Fulshear?
Sealy is 446 road miles from our Yukon, Oklahoma main office, about 8.8 hours by car. Fulshear is 17.3 miles east of Sealy. That distance can affect mobilization planning and the job scope, especially when a route also involves Interstate 10 or a BNSF Railway crossing.
How early should I call Texas811 for a bore on Ward Bend Road in Sealy?
The person arranging the locate request should describe the bore path along Ward Bend Road to Texas811. Texas law requires notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed before work continues.
What affects the cost of a directional bore under Interstate 10 in Sealy?
The scope drives the price: footage, pipe size, Sealy’s clay, utilities to expose, pavement, pits, backfill and any creek crossing all matter. A route beneath Interstate 10 has highway requirements to plan for, and a BNSF Railway crossing adds railroad coordination. Mobilization from Yukon is another job factor.
Where the Sealy facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sealy
- U.S. Census Bureau, TIGER/Line 2024: Sealy boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Sealy
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sealy housing units and year built
- Macrostrat geologic map compilation: map units under Sealy
- U.S. EPA Safe Drinking Water Information System: public water systems serving Sealy
- U.S. Department of Transportation, North American Rail Network: track owners in Austin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Austin County
- U.S. Geological Survey, Elevation Point Query Service: Sealy elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sealy
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sealy
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sealy, Texas
Type the address of your job in Sealy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Sealy
Same county: Bellville · Industry · New Ulm. All counties: Texas county list.
