Copperas Cove Texas Directional Boring: Topsey Clay, BNSF Railway, Clear Creek
Quick Answer: What is in the top five feet along Big Divide Road? The USDA soil survey maps Topsey soil across much of Copperas Cove and bedrock within 40 inches across 70 percent of the city. We do directional boring, also called horizontal directional drilling (HDD), for routes that cross BNSF Railway tracks in Copperas Cove. The Yukon, Oklahoma main office is 370 road miles from Interstate 14 in Copperas Cove. Topsey clay loam can hold a bore open, but sticky clay can gather on the reamer and grip the pipe.
Copperas Cove bores at a glance
- Incorporated city in Coryell County, Lampasas County and Bell County, Texas. Population 39,627 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 370 miles, about 7.1 hours of driving.
- Ground: Topsey soil is mapped on 34 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 70 percent of the area.
- Highways inside the boundary: Interstate 14, US 190, FM 116, FM 3046 and FM 2657. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: BNSF Railway, with 9 mapped street and rail crossings.
- Named streams inside the boundary: Clear Creek, Turkey Run Creek, Binion Creek and Ripstein Creek.
- Public water: City of Copperas Cove, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring along Big Divide Road in Copperas Cove?
We take directional boring work in Copperas Cove, in Coryell County and the neighboring counties within the city limits. The Census Bureau Vintage 2024 estimate puts Copperas Cove at 39,627 residents, a population figure we keep in context when planning underground work. Along Big Divide Road or Robertson Avenue, we install water, sewer, gas, electric conduit and fiber, with the bore route and pipe size guiding the setup.
Our main office is in Yukon, Oklahoma, and Copperas Cove work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa. A typical Copperas Cove job is shorter, with the route shaped by Topsey clay and nearby street or utility crossings.

What kind of ground does Topsey soil mean for Copperas Cove bores?
The USDA soil survey maps Topsey as the leading soil series in Copperas Cove, covering 34 percent of the city. At the surface, clay loam is mapped across 50 percent, while silty clay covers 19 percent. About 40 inches below the surface, the survey maps bedrock across 37 percent and silty clay loam across 34 percent. Average clay content at that depth is 38 percent. These are mapped patterns, not test borings, so the route near Topsey soil still needs a site specific plan.
| USDA soil survey, inside the Copperas Cove city limits | What is mapped |
|---|---|
| Soil series mapped | Topsey 34 percent, Real 13 percent, Nuff 10 percent, Doss 9 percent and Cho 8 percent |
| Texture at the surface | clay loam 50 percent, silty clay 19 percent and gravelly clay loam 18 percent |
| Texture about 40 inches down | bedrock 37 percent, silty clay loam 34 percent and silty clay 11 percent |
| Engineering class about 40 inches down | lean clay (CL) 22 percent, silt (ML) 11 percent and fat clay (CH) 11 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 70 percent of the area (5 percent hard rock, 65 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 32 percent of the area |
Bedrock is typically 23 inches deep in Copperas Cove, and the survey maps it within 60 inches across 70 percent of the city; most of that is weathered bedrock. The geologic map includes Stony Calcareous Clay Solution Residuum of Cenozoic age, with fractured limestone below some residuum. That can slow drilling or change steering at a soil and rock contact. Since seasonal water table and flood prone soils are not mapped for Copperas Cove, we verify ground conditions before selecting bore depth. High steel corrosion risk covers 32 percent, so the line owner should consider casing and tracer wire materials.
How do crews handle bedrock on Copperas Cove bore routes?
The Topsey and Real soil patterns in Copperas Cove point to clay, rock and changing transitions, not one uniform bore. We match the drilling fluid, reaming sequence and tooling to what the route shows.
- Topsey clay loam covers 15 percent of the mapped area; we manage sticky cuttings with fluid suited to clay and ream in stages.
- With bedrock mapped within 40 inches across 70 percent of Copperas Cove, we allow for slower drilling and choose tooling for the encountered rock.
- At a soil and rock transition near the Real Rock outcrop complex, we check steering closely because the drill head can deflect at the change.
- Along Avenue B, we hydrovac expose each marked utility on the bore path, then track the head from the surface and log depth and pitch.

Where can we bore across BNSF Railway in Copperas Cove?
Interstate 14, US 190, FM 116 and FM 3046 run inside Copperas Cove, while Texas State Highway 9 lies just outside the city limits. Work along those routes can involve TxDOT right of way. Big Divide Road runs 3.8 miles within the city, Robertson Avenue 3.28 miles and Avenue B 2.66 miles. Those long streets can have multiple utilities and pavement to work around. A bore route lets crews pass under a street or driveway rather than cut across its surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 14 | Interstate | 3.5 roadway miles inside | State highway office |
| US 190 | US highway | 14.4 roadway miles inside | State highway office |
| FM 116 | State highway | 8.4 roadway miles inside | State highway office |
| FM 3046 | State highway | 1.2 roadway miles inside | State highway office |
| FM 2657 | State highway | 0.9 roadway miles inside | State highway office |
| FM 1113 | State highway | 0.2 roadway miles inside | State highway office |
| Texas State Highway 9 | Highway nearby | 0.1 miles outside | State highway office |
| Texas State Highway 201 | Highway nearby | 0.4 miles outside | State highway office |
| US 190 Business | Highway nearby | 1.5 miles outside | State highway office |
| BNSF Railway | Railroad | 5.19 track miles inside | The railroad |
| Clear Creek | Stream | 2.89 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Turkey Run Creek | Stream | 1.94 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Binion Creek | Stream | 1.76 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Ripstein Creek | Stream | 0.55 channel miles inside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 5.19 track miles inside Copperas Cove, and public records map 9 street and rail crossings in the city. A track bore needs the railroad owner’s agreement. Clear Creek runs 2.89 channel miles in the city, and the map records 20 street crossings of named streams. Turkey Run Creek and Binion Creek also run through Copperas Cove. Creek crossings are reviewed for possible federal jurisdiction during planning, and the bore path must account for the channel.
Who approves a bore near Interstate 14 in Copperas Cove?
Interstate 14, US 190, FM 116 and other state routes in Copperas Cove fall under TxDOT for utility work in the right of way. The TxDOT Waco District reviews the highway permit. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. A highway crossing is bored or tunneled, with required cover and casing set by TxDOT rules and the permit. Copperas Cove streets belong to the city. BNSF Railway track crossings need an agreement from the railroad owner, and Clear Creek crossings are checked for jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in the ground across Coryell County near Copperas Cove?
The City of Copperas Cove owns the public water system, which uses purchased surface water and serves 41,669 people through 14,734 service connections. That network may affect a new water bore along Avenue B or Big Divide Road. Electric service reporting for Coryell County lists Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. We identify the line owner for the route before setting electric conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Copperas Cove | Public water system | Surface water bought from another system | 14,734 connections, 41,669 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Coryell County, Lampasas County and Bell County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Copperas Cove’s median housing year at 1990, which we consider when planning underground routes. Survey estimates show 6 percent of Copperas Cove homes built before 1960, 62 percent from 1960 to 1999 and 32 percent in 2000 or later; we plan with this profile. A bore along Avenue B may serve a newer connection or replace an older line. Before the drill approaches any marked utility, we expose it with hydrovac potholing; paint shows its position, not its depth.

Do you cover Copperas Cove and nearby Fort Hood?
Copperas Cove covers 18.03 square miles across Coryell, Lampasas and Bell counties, with 81 percent in Coryell County. The city sits at an elevation of 1,122 feet and uses ZIP code 76522. Kempner is 4.6 miles southwest, Fort Hood is 7.8 miles east and Killeen is 11.2 miles east. Gatesville, the Coryell County seat, is 24.2 miles northeast. The Yukon, Oklahoma main office is 370 road miles away, or a 7.1 hour drive, which can affect mobilization for a Copperas Cove job.
Places near Copperas Cove
- Directional boring in Kempner: 4.6 miles southwest
- Directional boring in Fort Hood: 7.8 miles east
- Directional boring in Killeen: 11.2 miles east
- Directional boring in Briggs: 15.9 miles south
- Directional boring in Lampasas: 16.3 miles west
What kinds of bores come up near Robertson Avenue in Copperas Cove?
- Highway crossing: A bore under Interstate 14 avoids opening the pavement, with the utility owner arranging the TxDOT permit.
- Water service: A route near the City of Copperas Cove water system can connect a service while passing beneath Robertson Avenue.
- Fiber conduit: Big Divide Road offers a named route where conduit may need to pass below street pavement and marked utilities.
- Creek crossing: A bore under Clear Creek keeps the channel surface uncut, with jurisdiction checked during planning.
- Rail crossing: A route beneath BNSF Railway track needs an agreement from the railroad owner before the crossing is planned.
- Street utility: A bore along Avenue B can carry sewer or electric conduit beneath pavement, with marked lines exposed before drilling near them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Copperas Cove bore near Clear Creek?
For a quote near Clear Creek or Robertson Avenue, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans also help. A route map helps us see whether the job approaches a creek, a street crossing or the BNSF Railway before we plan the bore.
A short route through Topsey clay with clear access and few crossings is simpler to plan than a longer bore through rock or beneath pavement. The price depends on footage, pipe size, soil and rock, utility exposures, pavement, pits and excavator time. A Clear Creek crossing can add planning and site needs, while a BNSF Railway or Interstate 14 crossing calls for added coordination. Copperas Cove’s 370 road miles from Yukon also affect mobilization.
Questions people ask about boring in Copperas Cove
Does Trinity Boring Solutions take directional boring work in Coryell County and Copperas Cove?
Yes. We take work in Copperas Cove and staff it with our own crews or crews working from vetted partner contractor yards. Our Yukon office stays your contact from the first call through the bore log. For a route near Big Divide Road, we plan around the mapped clay and the utilities along the path.
What does a Copperas Cove bore under BNSF Railway need?
BNSF Railway owns 5.19 track miles inside Copperas Cove. A crossing needs an agreement with the railroad owner, which sets the crossing conditions. If the route also involves highway right of way near Interstate 14, TxDOT asks for a copy of the railroad agreement as part of its review.
Can a line be bored under Clear Creek in Copperas Cove?
A bore can be planned beneath Clear Creek, which runs 2.89 channel miles inside Copperas Cove. The route must account for channel depth and site conditions. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction, then shape the bore path around the creek and nearby utilities.
Who runs Copperas Cove’s public water system, and where does its water come from for our underground work planning?
The City of Copperas Cove owns the public water system, and its source is purchased surface water. Public records show 14,734 service connections serving 41,669 people. For a bore near Avenue B, the water system’s location and the proposed route help determine where existing lines must be exposed.
Which electric companies report service in Coryell County near Copperas Cove, and who confirms conduit specs?
Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service report service in Coryell County. That information does not confirm the water provider at every Copperas Cove address, so we verify service details before planning a bore. The line owner should confirm conduit requirements for a route near Big Divide Road.
Who is responsible for streets like Avenue B in Copperas Cove, and does a bore require cutting one?
Avenue B is a city street because Copperas Cove is incorporated. A directional bore can pass below the street without cutting its pavement, with entry and exit pits placed off the travel surface where conditions allow. The mapped Avenue B route is 2.66 miles within the city.
How far is Copperas Cove from Yukon, and does Killeen change the job plan?
The Yukon, Oklahoma main office is 370 road miles from Copperas Cove, a 7.1 hour drive. That distance can affect crew mobilization. Killeen is 11.2 miles east of Copperas Cove, but the quote still depends on the bore route, ground and crossings at the actual job site.
How much notice does Texas811 need for a Copperas Cove bore along Big Divide Road?
The person arranging a bore along Big Divide Road should describe the route and request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no more than 14 days ahead. If the start moves more than 14 days beyond the original notice, submit a new request. Before continuing a Copperas Cove bore, we have worn or moved marks refreshed to keep the marked utility route clear.
What affects the cost of directional boring near Interstate 14 in Copperas Cove?
The job’s length and pipe size, Topsey clay or bedrock, utility crossings, pavement, pits and excavator time all affect the price. A crossing near Interstate 14 can require TxDOT coordination, while distance from the Yukon office affects mobilization. A Clear Creek route or BNSF Railway crossing can add planning demands.
Where the Copperas Cove facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Copperas Cove
- U.S. Census Bureau, TIGER/Line 2024: Copperas Cove boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Copperas Cove
- U.S. Census Bureau, American Community Survey 2019 to 2023: Copperas Cove housing units and year built
- Macrostrat geologic map compilation: map units under Copperas Cove
- U.S. EPA Safe Drinking Water Information System: public water systems serving Copperas Cove
- U.S. Department of Transportation, North American Rail Network: track owners in Coryell County, Lampasas County and Bell County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Coryell County, Lampasas County and Bell County
- U.S. Geological Survey, Elevation Point Query Service: Copperas Cove elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Copperas Cove
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Copperas Cove
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Copperas Cove, Texas
Type the address of your job in Copperas Cove. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Copperas Cove
County: Lampasas County directional boring. Same county: Gatesville · Oglesby · South Mountain · Evant · Flat · Mound · Lometa. All counties: Texas county list.
