trinityboringsolutions.com

East Alto Bonito Texas Directional Boring: McAllen Fine Sandy Loam, US 83, Salado Creek

Quick Answer: US 83 runs along the East Alto Bonito community boundary, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes here. The Yukon main office is 732 road miles away, with the Border Pacific Railroad 0.9 miles outside the mapped community boundary. USDA maps McAllen soil with sandy clay loam about 40 inches down, a layer that can hold the bore but cling to the reamer. Benito Street and Posada Street are local routes where the exact line path guides the bore plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

East Alto Bonito bores at a glance

  • Unincorporated community in Starr County, Texas. Population 905 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 732 miles, about 14.3 hours of driving.
  • Ground: McAllen soil is mapped on 100 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary. Closest: US 83.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in East Alto Bonito near Border Pacific Railroad?

US 83 is the main route constraint for East Alto Bonito, and Trinity Boring Solutions takes directional boring work in this Starr County community. The Census Bureau counted 905 residents in 2020. Water, sewer, gas, electric conduit and fiber can be routed beneath streets such as Benito Street or Posada Street, with the route set by the address and existing lines.

Our main office is in Yukon, Oklahoma, and East Alto Bonito work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. Compared with that reach, a route near US 83 is planned around its own length, ground and crossings. We are a family business that began in 1965 and has drilled directionally since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does McAllen soil mean for a bore in East Alto Bonito?

The USDA soil survey maps McAllen fine sandy loam across East Alto Bonito, with sandy clay loam at about 40 inches below the surface. That deeper layer is mapped as USCS CL, with an average clay content of 26 percent. The surface texture is fine sandy loam, so the drill moves from a finer sandy surface into a more clay rich layer. For a route near Benito Street, the change matters: clay can keep the hole open, but it may stick to the reamer and grip the pipe.

USDA soil survey, inside the East Alto Bonito mapped community boundaryWhat is mapped
Soil series mappedMcAllen 100 percent
Texture at the surfacefine sandy loam 100 percent
Texture about 40 inches downsandy clay loam 100 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The soil survey does not map bedrock within the top five feet, though that does not rule out rock deeper down. Seasonal water table, flood prone soil and high steel corrosion risk are not mapped in the community. The geologic map shows the Miocene Goliad Formation, which includes clay, sandstone, marl, caliche, limestone and conglomerate. That deeper mix is not a test of a Posada Street bore, so the route still needs field checks and a plan that can adapt if conditions differ.

How do we bore East Alto Bonito’s sandy clay loam?

We plan the bore for the McAllen sandy clay loam mapped in East Alto Bonito, then locate and expose marked lines before drilling near them. A staged ream and a ready pipe help manage the clay layer.

  1. For McAllen soil, we ream in stages and use a thinner drilling fluid with polymer so clay is less likely to ball on the reamer.
  2. On a Benito Street route, we expose every marked utility on the bore path with hydrovac before bringing the drill near it.
  3. We track the drill head from the surface and log depth and pitch as a bore advances beneath a Posada Street alignment.
  4. For a pullback through the sandy clay loam mapped in East Alto Bonito, we have the pipe ready before the final ream and pull it while the hole is open.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a line go under US 83 in East Alto Bonito?

US 83 runs along or touches the mapped East Alto Bonito community boundary, although no highway is mapped inside it. A route crossing the highway needs a bore plan for the pavement and right of way. Inside the community, Benito Street is the longest named street at 0.37 miles, followed by Hermiston Street at 0.35 miles and Toppenish Street at 0.34 miles. Posada Street adds another route to check. Those streets shape access and alignment, but the address determines which crossing applies.

CrossingTypeMapped extentWho has a say
US 83Highway nearbyRuns along or touches the city limitsState highway office
Border Pacific RailroadRailroad nearby0.9 miles outsideThe railroad
Salado CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Border Pacific Railroad lies 0.9 miles outside the mapped community boundary, and no street and rail crossing is mapped inside East Alto Bonito. A route that reaches the track still needs coordination with its owner. Salado Creek is 0.5 miles outside the boundary; no named stream or street crossing of a stream is mapped inside the community. No lakes or ponds are mapped within one mile, so a water crossing is not indicated by the local map.

Who approves a bore in East Alto Bonito, Starr County?

East Alto Bonito is unincorporated, so there is no city government to approve work on its streets; the county or state has authority according to the route. US 83 is a state highway, and its right of way needs a TxDOT utility permit reviewed by the TxDOT Pharr District. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system, while we prepare the bore plan and profile for that application. A Border Pacific Railroad crossing also calls for an agreement with the railroad owner. Salado Creek is checked for federal jurisdiction during crossing planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utility owners should be checked in East Alto Bonito, Starr County?

The water provider for a specific East Alto Bonito address has to be confirmed with the county or local water district before a bore is planned; EPA records do not match a provider to this place. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but that does not establish which serves each address. We confirm the line owner before planning an electric conduit route along Benito Street or another local road.

Line ownerWhat it isSourceSize
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in Starr CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in East Alto Bonito at 2001; 58 percent of homes were built in 2000 or later and 42 percent from 1960 to 1999. That mix can mean both new service routes and replacement work. Before a bore near Posada Street, we use hydrovac potholing to expose marked lines; paint shows position, not depth, and the age of nearby housing does not reveal what is buried at a specific spot.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is East Alto Bonito near Pablo Pena?

East Alto Bonito is an unincorporated community in Starr County at an elevation of 207 feet, covering 0.11 square miles in ZIP code 78582. Pablo Pena and Narciso Pena are each 0.3 miles west; Rivereno is 0.3 miles northwest. La Joya is the nearest larger city, 10.3 miles east, while Rio Grande City, the county seat, is 12.7 miles northwest. From the Yukon yard, the drive is 732 road miles and 14.3 hours, so distance is part of planning a job near US 83.

Places near East Alto Bonito

  • Narciso Pena: 0.3 miles west
  • Pablo Pena: 0.3 miles west
  • Rivereno: 0.3 miles northwest
  • Rafael Pena: 0.3 miles west
  • Longoria: 0.4 miles west
  • Directional boring in La Joya: 10.3 miles east

What would we bore near Benito Street in East Alto Bonito?

  • Highway crossing: A route beneath US 83 needs a bore plan for pavement and the right of way, with the utility owner handling the permit filing.
  • Water or sewer service: A line along Benito Street needs its address specific water provider confirmed before we plan the bore.
  • Fiber or electric conduit: A route near Posada Street starts with line owner confirmation and potholing at marked crossings.
  • Rail crossing: A proposed route near the Border Pacific Railroad needs an agreement with the track owner before drilling is scheduled.
  • Creek crossing: A route near Salado Creek needs channel conditions reviewed and federal jurisdiction checked during planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for East Alto Bonito work near Posada Street?

A map pin matters for a Posada Street quote because a few blocks can change whether the route approaches US 83, a marked utility or a different access point. Send the address, what will go underground, the pipe or conduit size and the footage. A sketch or plan helps us check the intended alignment and identify questions before estimating the work.

McAllen soil is the first pricing concern because clay at about 40 inches can affect reaming and pipe pullback. Length, pipe or conduit size, and the number of utilities to expose also shape the job. A US 83 or Border Pacific Railroad crossing can add design and coordination work; pavement, pits, excavator time and sand backfill matter too. The 732 road miles from Yukon affect mobilization, while emergency timing or a high profile route can change the work plan.

Questions people ask about boring in East Alto Bonito

Does Trinity Boring Solutions take directional boring jobs in East Alto Bonito, Starr County?

Yes. Trinity Boring Solutions takes directional boring work in East Alto Bonito and across Texas. Our Yukon office coordinates the project, and our own crews or crews from satellite yards run by partner drilling contractors we have vetted can perform the work. We remain your point of contact through the bore log, including for a route near US 83.

What is the McAllen soil like for a bore in East Alto Bonito?

The USDA soil survey maps McAllen fine sandy loam, with sandy clay loam about 40 inches below the surface. That layer is classified as CL and has an average clay content of 26 percent. It can help support an open hole but may build up on a reamer, so staged reaming and a planned pullback suit a route near Benito Street.

Will a bore in East Alto Bonito hit rock?

Bedrock is not mapped in the top five feet of East Alto Bonito, which does not rule out deeper rock. The geologic map shows the Miocene Goliad Formation, including sandstone, limestone, caliche and other materials. That map does not establish the conditions beneath a specific Posada Street route, so the bore plan should allow for field conditions.

Who approves a bore under US 83 near East Alto Bonito?

TxDOT reviews a utility permit for work in the US 83 right of way through its Pharr District. The utility owner files the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for the owner. Because East Alto Bonito has no city government, its local street work is handled by the county or state as applicable.

What does a bore under the Border Pacific Railroad near East Alto Bonito need?

A crossing beneath the Border Pacific Railroad needs an agreement with the railroad that owns the track. The railroad sets crossing conditions such as casing, depth and flagging. The track is 0.9 miles outside East Alto Bonito’s mapped boundary, so a proposed route has to establish whether it reaches that crossing before the bore is planned.

Can a line be bored under Salado Creek near East Alto Bonito?

A line can be planned for a crossing near Salado Creek, but the channel and route need review before work is designed. The creek is 0.5 miles outside the mapped community boundary. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction and account for the channel in the bore path.

What bore sizes and lengths can you handle near Posada Street in East Alto Bonito?

For a Posada Street project, Trinity handles lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The needed size and length depend on what the line carries and the route. A map pin and plans help us assess the specific East Alto Bonito alignment.

How much 811 notice is needed before boring near Benito Street in East Alto Bonito?

Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. Marks show position, not depth; if marks near Benito Street wear off or move, have them refreshed before work continues.

What affects the cost of directional boring under US 83 in East Alto Bonito?

The route and scope drive the price, especially a US 83 crossing, the McAllen clay layer and the number of utilities that need exposure. Length, pipe size, pavement, pits, excavator time, creek or drainage crossings and backfill also affect the plan. Mobilization from the Yukon office matters because East Alto Bonito is 732 road miles away.

Where the East Alto Bonito facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in East Alto Bonito

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in East Alto Bonito, Texas

Type the address of your job in East Alto Bonito. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for East Alto Bonito

Same county: Rio Grande City · Roma · Las Lomas · Escobares · La Grulla · Mikes · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.