Kirbyville Texas Directional Boring: Otanya Soil, US 96 and Trout Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), for routes under US 96 and other Kirbyville crossings. Kirbyville is 462 road miles from our Yukon, Oklahoma yard, and our crews can work near Margaret Avenue. USDA mapping shows a seasonal water table within 60 inches across 81 percent of the area, so access pits may need pumping. Otanya very fine sandy loam is common, and staged reaming helps keep the hole stable.
Kirbyville bores at a glance
- Incorporated city in Jasper County, Texas. Population 2,021 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 462 miles, about 9.6 hours of driving.
- Ground: Otanya soil is mapped on 37 percent of the area, with loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 96, FM 1013, FM 252, FM 82 and FM 363. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: BNSF Railway and Timber Rock Railroad, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Trout Creek.
- Public water: City of Kirbyville, groundwater wells.
- Electric: City of Kirbyville municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near US 96 in Kirbyville?
Kirbyville is 462 road miles from our Yukon yard, and we take work in Jasper County with our own crews and vetted partner crews. The Census Bureau Vintage 2024 estimate puts the city population at 2,021. We install water, sewer, gas, electric conduit and fiber, including routes beneath US 96, Margaret Avenue and local driveways where an open cut would disrupt access.
Our main office is in Yukon, Oklahoma, and Kirbyville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near Margaret Avenue, our service line range includes 3/4 inch lines, with 48 inch casing for longer routes up to 5,000 feet. We are a family business started in 1965, with directional boring since 1982, and that range suits projects from a service connection to a longer utility crossing in Kirbyville.

What does the USDA soil survey show about Otanya soil in Kirbyville?
The USDA soil survey maps Otanya soil across 37 percent of Kirbyville, including Otanya very fine sandy loam on 27 percent of the mapped area. At about 40 inches below the surface, loam is mapped under 39 percent and sandy clay loam under 37 percent; average clay content there is 22 percent. The survey maps no area as sandy at that depth. For Kirbyville boring plans, we treat mapped patterns as context, not test borings. The clay rich layers can cling to a reamer, so staged reaming and a same day pullback can help limit the time an open hole is exposed.
| USDA soil survey, inside the Kirbyville city limits | What is mapped |
|---|---|
| Soil series mapped | Otanya 37 percent, Kirbyville 24 percent, Waller 15 percent, Sorter 9 percent and Hatliff 9 percent |
| Texture at the surface | very fine sandy loam 52 percent, fine sandy loam 23 percent and silt loam 15 percent |
| Texture about 40 inches down | loam 39 percent, sandy clay loam 37 percent and very fine sandy loam 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 82 percent, silt (ML) 9 percent and silty clayey sand (SC SM) 9 percent |
| Average clay content about 40 inches down | 22 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 81 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 54 percent of the area |
Bedrock is not mapped in the top five feet in Kirbyville, though that does not rule out rock deeper down. A seasonal water table is mapped within 60 inches across 81 percent of the area, so pits may need pumping. Flood prone soils cover 9 percent, a reason to plan carefully near Trout Creek. High steel corrosion risk is mapped across 54 percent, so the line owner should consider material choices for casing and tracer wire. The Lissie Formation, of Pleistocene age, is mapped as sand, silt and clay, so ground can vary along a route.
How do crews bore through loam in Kirbyville?
Kirbyville’s mapped loam and clay layers call for a bore plan that accounts for sticky cuttings and wet access pits. We track the drill head from the surface and log depth and pitch as the route advances.
- Where Kirbyville’s loam and clay layers are encountered, we adjust fluid and ream in stages to manage sticky cuttings and reduce the chance of the hole gripping the pipe.
- With a seasonal water table mapped within 60 inches across 81 percent of Kirbyville, we keep access pits manageable and pump water when needed.
- Before a bore near the City of Kirbyville water system or municipal electric lines, we hydrovac pothole marked utilities along the path and check their depth.
- For routes near Trout Creek or US 96, we track the drill head from the surface and log depth and pitch as each rod advances.

What could a new line cross in Kirbyville near BNSF Railway?
US 96 runs 3.2 roadway miles within Kirbyville, while FM 1013, FM 252, FM 82 and FM 363 also pass through the limits. A route along one of these roads may involve state right of way as well as pavement. Margaret Avenue is the longest named street at 3.24 miles in the city, followed by Martin Luther King Street at 2.89 miles and Elizabeth Avenue at 1.49 miles. Those street lengths help identify the corridor, but the specific bore path still determines what must be crossed.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 96 | US highway | 3.2 roadway miles inside | State highway office |
| FM 1013 | State highway | 1.3 roadway miles inside | State highway office |
| FM 252 | State highway | 0.7 roadway miles inside | State highway office |
| FM 82 | State highway | 0.6 roadway miles inside | State highway office |
| FM 363 | State highway | 0.1 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 2.49 track miles inside | The railroad |
| Timber Rock Railroad | Railroad | 0.02 track miles inside | The railroad |
| Trout Creek | Stream | 1.29 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Boggy Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Davis Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Slaydons Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Robinson Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 2.49 track miles within Kirbyville, and the Timber Rock Railroad has 0.02 track miles. Public mapping shows 3 street and rail crossings in the city, so a route near either line needs careful crossing coordination. Trout Creek runs 1.29 channel miles through Kirbyville, with 2 mapped street crossings of named streams. The map also places Boggy Creek and Davis Creek 0.1 miles from the city limits, so nearby drainage may matter to a route.
Who approves a bore on Kirbyville roads in Jasper County?
Kirbyville is an incorporated city, so its city streets belong to the city itself; no city permit form or fee is assumed here. For work in the right of way of US 96, FM 1013, FM 252, FM 82 or FM 363, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Beaumont District reviews it. We prepare the bore plan and profile for the owner’s filing. TxDOT cover rules include 60 inches for electric and communication crossings, 60 inches for water crossings and 60 inches for pressurized sewer crossings; the permit can set a different depth. A BNSF Railway or Timber Rock Railroad crossing needs an agreement with the track owner. Trout Creek is checked for US Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Kirbyville water system?
The City of Kirbyville public water system uses groundwater wells and reports 1,121 service connections serving 2,578 people. Kirbyville also owns its municipal electric system, a utility we account for when planning underground boring routes. Before a bore near the water lines or electric system, we use hydrovac potholing to expose marked utilities along the route; paint shows position, not depth. That check matters before a drill approaches lines near US 96 or Margaret Avenue.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Kirbyville | Public water system | Groundwater wells | 1,121 connections, 2,578 people served |
| City of Kirbyville municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 1,083 customers reported |
| Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Jasper County | EIA Form 861 | Confirm the line owner by address |
Kirbyville’s 2019 to 2023 ACS estimates put the median housing year at 1981, context we consider when planning underground work. The estimates show 25 percent of homes built before 1960, 66 percent from 1960 to 1999 and 9 percent in 2000 or later. That mix can mean a project is replacing older pipe or adding a new service along Margaret Avenue. We expose each marked utility on the bore path before drilling near it, rather than treating locate paint as a depth reading.

Do you cover Kirbyville and nearby Newton?
Kirbyville is in Jasper County, covers 2.42 square miles and sits at an elevation of 104 feet. Its ZIP code is 75956. Buna is 15.3 miles south, Newton is 15.9 miles northeast, and Jasper is 19.1 miles north; Jasper is also the county seat and nearest larger city. From our Yukon, Oklahoma yard, the road distance is 462 miles and the drive takes 9.6 hours. That distance can affect mobilization for a bore along US 96 or a route near Trout Creek.
Places near Kirbyville
- Directional boring in Buna: 15.3 miles south
- Directional boring in Newton: 15.9 miles northeast
- Directional boring in Jasper: 19.1 miles north
- Directional boring in Evadale: 24.6 miles south
- Directional boring in Deweyville: 25.9 miles south
Which jobs call for a bore near Margaret Avenue in Kirbyville?
- Highway crossing: A route beneath US 96 can keep the pavement intact while the bore passes under the road corridor.
- Water service: A new connection near Margaret Avenue can use a bore to reach a property without opening the full street route.
- Fiber conduit: A conduit route along Martin Luther King Street can avoid cutting pavement and driveways where the alignment allows.
- Creek crossing: A bore near Trout Creek can pass beneath the channel, with the route planned around the mapped drainage.
- Rail crossing: A route near BNSF Railway needs coordination with the railroad that owns the track before a crossing is planned.
- Electric conduit: A route near the City of Kirbyville municipal electric system starts with confirming the line owner and exposing marked utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Kirbyville bore near Trout Creek?
For a Kirbyville estimate, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near US 96 needs its crossing limits identified, while one near Trout Creek needs the creek and drainage path shown. Those details help us judge access, pits and the route before building the bore plan.
A short route with a clear path near Margaret Avenue is simpler to plan than a bore with several marked utilities or a creek crossing. Length, pipe or conduit size, Otanya soil and the loam mapped below it all affect the method and scope. Crossings of US 96 or BNSF Railway can add coordination, and pavement, pits, excavator time and backfill also matter. Mobilization from the Yukon yard is part of the estimate because Kirbyville is 462 road miles away.
Questions people ask about boring in Kirbyville
Does Trinity Boring Solutions take directional boring work in Jasper County near Kirbyville?
Yes. We take directional boring work in Kirbyville and staff it with our own crews or crews from partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including when a partner crew is on site near US 96 or Margaret Avenue.
Who approves a bore under US 96 in Kirbyville?
For a bore in the US 96 right of way, the utility owner submits the application through TxDOT’s RULIS system, and the TxDOT Beaumont District reviews it. We prepare the bore plan and profile for the owner. The permit sets the project conditions, including any required cover depth for the line crossing.
What does a bore under BNSF Railway require in Kirbyville?
A crossing under BNSF Railway needs an agreement with BNSF Railway, the track owner. The agreement provides the crossing conditions, including casing, depth and flagging. Kirbyville has 2.49 track miles of BNSF Railway, so the planned route and railroad limits need to be identified before the crossing is designed.
Can a line be bored under Trout Creek in Kirbyville?
A bore can be planned beneath Trout Creek, subject to the route and site conditions. The creek has 1.29 channel miles within Kirbyville, and planning checks whether the crossing involves US Army Corps of Engineers jurisdiction. The channel and banks need to be considered in setting the bore path and access pits.
Who runs Kirbyville’s public water system, and where does its water come from?
The City of Kirbyville owns and runs the public water system, which draws from groundwater wells. It reports 1,121 service connections and a population served of 2,578. A bore near the system should locate and expose the marked water lines before drilling approaches them.
Who owns electric lines in Jasper County near Kirbyville, and who confirms conduit specs?
The City of Kirbyville owns its municipal electric system. The line owner should confirm conduit specifications for the particular route before an electric conduit bore is planned. That check is especially useful near Margaret Avenue, where a planned route may encounter existing marked utilities.
How far is Kirbyville from Yukon, and does nearby Jasper affect the job?
Kirbyville is 462 road miles and a 9.6 hour drive from our Yukon, Oklahoma yard. Jasper is 19.1 miles north and is the nearest larger city. The distance from Yukon can affect mobilization for work near US 96, while Jasper’s proximity does not replace checking the actual Kirbyville route.
How much 811 notice does a bore near Margaret Avenue in Kirbyville need?
Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For Kirbyville work, if the start moves more than 14 days past the original notice, we make a new request. Have worn or moved marks refreshed through Texas811 before work continues near Margaret Avenue.
What affects the cost of directional boring under US 96 in Kirbyville?
The estimate depends on length, pipe or conduit size, soil, utility crossings, pavement, pits and access needs. A route under US 96 may take different planning than a short service near Margaret Avenue, and Trout Creek drainage can affect the bore setup. Mobilization from Yukon also matters because Kirbyville is 462 road miles away.
Where the Kirbyville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kirbyville
- U.S. Census Bureau, TIGER/Line 2024: Kirbyville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Kirbyville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kirbyville housing units and year built
- Macrostrat geologic map compilation: map units under Kirbyville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Kirbyville
- U.S. Department of Transportation, North American Rail Network: track owners in Jasper County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jasper County
- U.S. Geological Survey, Elevation Point Query Service: Kirbyville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kirbyville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kirbyville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kirbyville, Texas
Type the address of your job in Kirbyville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kirbyville
Same county: Sam Rayburn · Browndell. All counties: Texas county list.
