Falls City Texas Directional Boring: Buchel Clay, San Antonio River and US 181
Quick Answer: From our Yukon yard, Falls City is 505 road miles away, and our own crews plus vetted partner contractor crews staff work near US 181. We take directional boring, also called horizontal directional drilling (HDD), for routes beneath Front Street and other Falls City streets. The mapped ground is mostly sandy clay loam, while clay makes up 32 percent at the surface, so fluid and reaming need control. The San Antonio River and flood prone soils call for careful route and pit planning.
Falls City bores at a glance
- Incorporated city in Karnes County, Texas. Population 513 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 505 miles, about 9.8 hours of driving.
- Ground: Buchel soil is mapped on 31 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: US 181, FM 791 and FM 887. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: San Antonio River and Marcelinas Creek.
- Public water: City of Falls City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near US 181 in Falls City?
At 505 road miles from our Yukon yard, Falls City work is staffed by our own crews and crews from partner drilling contractors we have vetted. The Census Bureau Vintage 2024 estimate puts the Karnes County city at 513 people. We install water, sewer, gas, electric conduit and fiber lines, including routes along Front Street or beneath US 181 where the plans and permits allow.
Our main office is in Yukon, Oklahoma, and Falls City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. Our size range runs from 3/4 inch service lines to 48 inch casing, for projects such as routes near US 181.

What does the Buchel soil survey show in Falls City?
The USDA soil survey maps Buchel across 31 percent of Falls City and Buchel clay, 0 to 1 percent slopes, occasionally flooded across 28 percent. Pernitas sandy clay loam, 2 to 5 percent slopes, covers 27 percent, with Colibro and Sinton sandy clay loam also mapped. At the surface, sandy clay loam accounts for 53 percent and clay for 32 percent. About 40 inches down, sandy clay loam is mapped across 58 percent and clay across 33 percent. These are mapped patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Falls City city limits | What is mapped |
|---|---|
| Soil series mapped | Buchel 31 percent, Pernitas 27 percent, Colibro 13 percent, Sinton 11 percent and Weesatche 7 percent |
| Texture at the surface | sandy clay loam 53 percent, clay 32 percent and fine sandy loam 10 percent |
| Texture about 40 inches down | sandy clay loam 58 percent, clay 33 percent and sandy clay 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 58 percent and fat clay (CH) 39 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 42 percent of the area |
| High corrosion risk for uncoated steel | 34 percent of the area |
The USDA soil survey gives a typical bedrock depth of 29 inches, but bedrock within 60 inches is mapped across only 1 percent of Falls City. That map does not settle what a specific bore will encounter. No seasonal water table is mapped within 60 inches, while flood prone soils cover 42 percent, so the San Antonio River corridor deserves attention when setting pit locations. High steel corrosion risk is mapped across 34 percent, a concern for uncoated casing or tracer wire. The map includes Cenozoic alluvium and Late Eocene sedimentary rock, so ground conditions can vary along a route.
How do we bore Falls City sandy clay loam?
Falls City maps both sandy clay loam and substantial clay, so we plan the fluid and reaming around the route rather than assuming one ground condition. Near the San Antonio River, the pit and bore path also need to account for flood prone soils.
- With clay mapped across 32 percent of the surface, we use controlled fluid and staged reaming to limit sticky cuttings and reduce the chance of the hole gripping the pipe.
- Because the survey maps 38 percent average clay at about 40 inches, we watch fluid returns and keep pressure controlled near pavement on a Falls City street.
- Before drilling near a route on Front Street or Irvin Street, we hydrovac pothole each marked utility and check its depth rather than relying on paint alone.
- For a crossing near the San Antonio River, we plan the bore below the channel and check for Corps jurisdiction; the flood prone soil map also informs pit placement.

Which roads, tracks or creeks might a Falls City bore cross near Front Street?
US 181 has 1.3 mapped roadway miles inside Falls City, while FM 791 has 0.9 and FM 887 has 0.4. A utility route on one of these state roads needs a plan for the highway right of way. Front Street is the longest named street at 1.39 miles in the city. Irvin Street measures 0.69 miles and Elwood Street 0.57 miles. These named streets help locate a route, but the exact crossing and pavement conditions determine where entry and exit pits can go.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 1.3 roadway miles inside | State highway office |
| FM 791 | State highway | 0.9 roadway miles inside | State highway office |
| FM 887 | State highway | 0.4 roadway miles inside | State highway office |
| San Antonio River | Stream | 1.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Marcelinas Creek | Stream | 0.67 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Falls City or within one mile outside its limits, and no street and rail crossing is mapped in the city. The mapped streams are the San Antonio River, with 1.22 channel miles, and Marcelinas Creek, with 0.67. One street crossing of a named stream is mapped, though the records do not identify which street. No lakes or ponds are mapped within one mile, so the river and creek are the water crossings to check during route planning.
Who signs off on a Falls City bore in Karnes County?
We plan Front Street boring as city street work because Falls City is incorporated. For work in the right of way of US 181, FM 791 or FM 887, the line owning utility submits a utility permit application through TxDOT’s RULIS system, and the TxDOT Corpus Christi District reviews it. We prepare the bore plan and profile for that owner and work under its permit. TxDOT cover requirements set the depth under the named highway, with different requirements for electric, communication, water and pressurized sewer lines. A San Antonio River or Marcelinas Creek crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Falls City water lines?
The City of Falls City public water system uses groundwater wells and reports 302 service connections serving 514 people. That gives a bore planner a local water system to identify, not a reason to assume which line is at a particular address. Electric service reported in Karnes County includes AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. Before a conduit route near Front Street is set, we confirm the line owner and its conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Falls City | Public water system | Groundwater wells | 302 connections, 514 people served |
| AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative | Electric utilities reporting service in Karnes County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Falls City’s median year built at 1988. The estimates show 14 percent of homes built before 1960, 51 percent from 1960 to 1999 and 35 percent in 2000 or later. That age mix can mean a project replaces older service or adds a newer connection near Irvin Street; the address and plans tell us which. Before drilling close to marked utilities, we hydrovac pothole them because locate paint shows position, not depth.

Where is Falls City in relation to Floresville and Karnes City?
Falls City is in Karnes County, at an elevation of 319 feet, and covers 0.89 square miles. The city uses ZIP code 78113. Poth is 7.2 miles northwest, Karnes City is 9.9 miles southeast, and Floresville is 14.3 miles northwest. Karnes City is the county seat, while Floresville is the nearest larger city listed. From our Yukon yard, the route is 505 road miles and the drive is 9.8 hours. That distance is part of planning a crew and equipment mobilization for work near US 181 or the San Antonio River.
Places near Falls City
- Directional boring in Poth: 7.2 miles northwest
- Directional boring in Karnes City: 9.9 miles southeast
- Directional boring in Floresville: 14.3 miles northwest
- Directional boring in Kenedy: 15.7 miles southeast
- Directional boring in Stockdale: 17.9 miles north
What could we bore near Irvin Street in Falls City?
- Highway crossing: A route beneath US 181 needs a bore plan for the travel lanes and the applicable TxDOT cover depth.
- Water service: A connection near Front Street can be planned against the City of Falls City groundwater well system, with the specific line located before drilling.
- Fiber route: A conduit run along Irvin Street needs marked utilities exposed before the drill approaches them.
- Creek crossing: A route beneath the San Antonio River needs channel depth planning and a jurisdiction check during planning.
- Street connection: A service near Elwood Street can pass beneath pavement, with entry and exit pits placed in suitable dirt areas.
- Drainage route: Near Marcelinas Creek, the bore path and pits need to account for the mapped channel and flood prone soils.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Falls City bore near Terrell Street?
Start with an address or map pin; the exact spot matters near Terrell Street or the San Antonio River because access and crossings can change the bore plan. Falls City Marcelinas Creek bore: what pipe or conduit size and footage? A sketch or plans help us see the route, pits and marked utilities before we scope the work.
Ground and utility exposure are major price factors here: Falls City maps clay as well as sandy clay loam, and marked lines may need hydrovac potholing. The number of crossings, pavement or concrete, and a route under US 181 also affect the work. Creek or drainage crossings can add planning and pit needs. Pipe size, footage, sand backfill and excavator time matter too. The 505 road miles from Yukon can affect mobilization, and high profile or emergency work changes the scope.
Questions people ask about boring in Falls City
Does Trinity Boring Solutions take jobs in Falls City and Karnes County, and how are crews assigned?
Yes. We take directional boring work along US 181 in Falls City and across Texas, planning each crossing for the route. Our own crews and vetted partner contractor crews handle the field work, while you work with Trinity through the bore log. The 505 road miles from our Yukon yard are part of staffing and mobilization planning for a job near US 181.
Who owns electric lines in Falls City and Karnes County, and who confirms conduit specs?
Electric service reported in Karnes County includes AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. Those listings do not identify the provider at every Falls City address. We confirm the owner for the planned route, such as one near Front Street, and get conduit specifications from that line owner.
Can a bore on Falls City Elwood Street avoid cutting the street, and who controls it?
Falls City is incorporated, so city streets such as Elwood Street belong to the city. Directional boring can pass below pavement without an open cut across the street, with pits set in dirt on each side where the site allows. The route and access still need to fit the specific street location.
What do Falls City housing ages near Irvin Street mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates put the median year built at 1988, with 14 percent of homes built before 1960. That makes replacement work one possible scope near Irvin Street, while newer properties may need service extensions. We use the address and plans to identify existing lines, then expose marked utilities before drilling nearby.
Are bore pits near the Falls City San Antonio River affected by groundwater or flooding?
Flood prone soils are mapped across 42 percent of Falls City, including ground that makes the San Antonio River crossing worth careful route and pit planning. The soil survey maps no seasonal water table within 60 inches, but that does not establish conditions at a specific pit. We assess the location and check the river crossing for Corps jurisdiction during planning.
Can Falls City Buchel soil corrode steel, and what pipe can a bore use?
The soil survey maps high steel corrosion risk across 34 percent of Falls City, and Buchel clay is a prominent mapped soil. The line owner chooses any coating needed for steel casing or tracer wire. HDPE is another pipe material that does not have the same soil corrosion concern, with final material choice tied to the project.
Does Trinity cover Falls City, Poth and rural sites outside the limits?
Yes. We serve Oklahoma and Texas and take work across Texas, including Falls City, Poth and rural sites outside the city limits. Poth is 7.2 miles northwest of Falls City. The job address, access, route and line owner help establish the scope wherever the work is located.
How early should I request Texas811 marks for Falls City Front Street, and what if marks move?
For a bore near Front Street, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Falls City bore on FM 791, if the start slips more than 14 days past the original notice, we submit a new request. At San Antonio River crossings in Falls City, we refresh marks through Texas811 if they wear off or move before work continues.
What affects the cost of a Falls City bore near US 181?
The mapped clay and sandy clay loam, bore length, pipe or conduit size and utility exposures all affect the scope near US 181. Pavement, the number of crossings, creek or drainage work, pits, sand backfill and excavator time can also change the work. Mobilization from Yukon matters at 505 road miles, and emergency or high profile work may add planning needs.
Where the Falls City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Falls City
- U.S. Census Bureau, TIGER/Line 2024: Falls City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Falls City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Falls City housing units and year built
- Macrostrat geologic map compilation: map units under Falls City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Falls City
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Karnes County
- U.S. Geological Survey, Elevation Point Query Service: Falls City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Falls City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Falls City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Falls City, Texas
Type the address of your job in Falls City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Falls City
Same county: Runge. All counties: Texas county list.
