trinityboringsolutions.com

Center Point Texas Directional Boring: Nuvalde Clay, Highway 27, Guadalupe River

Quick Answer: For lines already in the ground near the Guadalupe River, the water provider must be confirmed for the address, and the electric line owner must be identified before a conduit bore. We do directional boring, also called horizontal directional drilling (HDD), in Center Point for routes crossing Texas State Highway 27 and local streets. Center Point is 477 road miles from our Yukon, Oklahoma main office, with Center Point Road among the streets to locate and plan around. Nuvalde silty clay can cling to a reamer, so the bore plan needs to account for sticky ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Center Point bores at a glance

  • Unincorporated community in Kerr County, Texas. Population 1,263 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 477 miles, about 9.8 hours of driving.
  • Ground: Nuvalde soil is mapped on 17 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 22 percent of the area.
  • Highways inside the boundary: Texas State Highway 27, RM 480 and FM 1350. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Guadalupe River, Verde Creek and Steel Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Texas State Highway 27 in Center Point?

Trinity Boring Solutions takes directional boring work in Center Point, in Kerr County, where the Census Bureau counted 1,263 people in the 2020 Census. Along Texas State Highway 27, we install water, sewer, gas, electric conduit, and fiber lines using directional boring. A route along Center Point Road or a service connection near Texas State Highway 27 needs a path that avoids existing utilities and keeps the surface intact.

Our main office is in Yukon, Oklahoma, and Center Point work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965 and have bored since 1982. More than four decades of directional boring means we plan for conditions such as Nuvalde silty clay and the Guadalupe River crossings shown in Center Point.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Nuvalde soil mean for a Center Point bore?

The USDA soil survey maps Nuvalde across 17% of Center Point, alongside Barbarosa at 17%, Kerrville at 16%, Oakalla at 16% and Orif at 11%. Mapped surface textures include silty clay loam across 34% and silty clay across 26%. At about 40 inches below the surface, clay is mapped across 34% of the area, while the average clay content at that depth is 31%. In Center Point, we treat Nuvalde soil maps as patterns, not test borings, when planning underground routes. Clay can hold an open hole but stick to the reamer and grip pipe.

USDA soil survey, inside the Center Point mapped community boundaryWhat is mapped
Soil series mappedNuvalde 17 percent, Barbarosa 17 percent, Kerrville 16 percent, Oakalla 16 percent and Orif 11 percent
Texture at the surfacesilty clay loam 34 percent, silty clay 26 percent and gravelly clay loam 16 percent
Texture about 40 inches downclay 34 percent, bedrock 22 percent and silty clay loam 16 percent
Engineering class about 40 inches downlean clay (CL) 43 percent, fat clay (CH) 22 percent and clean gravel (GP) 11 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches22 percent of the area (18 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils36 percent of the area
High corrosion risk for uncoated steel45 percent of the area

The USDA soil survey maps bedrock within 40 inches across 22% of Center Point, including hard bedrock across 18% and weathered bedrock across 4%. The Glen Rose Formation, of Albian age, includes limestone, dolostone and marl, so a bore may move from soil into rock and need a slower approach. No seasonal water table is mapped within 40 or 60 inches, but flood prone soils cover 36% of the area near creeks. High steel corrosion risk is mapped across 45%, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern.

How do crews bore through clay in Center Point?

Nuvalde soil and the mapped silty clay textures call for steady fluid control and staged reaming. At Center Point, the route also matters: a bore near the Guadalupe River needs a plan for the channel and its banks.

  1. Nuvalde and other clay soils can cling to the reamer, so we use thinner drilling fluid, ream in stages and plan to pull pipe soon after opening the hole.
  2. Where the USDA survey maps bedrock within 40 inches, including parts of the Glen Rose Formation, we allow for slower drilling and check steering as the ground changes.
  3. Near the Guadalupe River and other mapped flood prone soils, we plan the bore depth beneath the channel and review whether the crossing needs jurisdiction checks.
  4. Before a drill approaches marked lines along Center Point Drive, we expose them with hydrovac potholing; paint shows location, not depth, and the walkover locator tracks the drill head.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where does a line have to go under the Guadalupe River in Center Point?

Texas State Highway 27 has 4.0 mapped roadway miles inside the community boundary. RM 480 has 2.3 miles and FM 1350 has 2.9 miles there. The route can also follow or cross Center Point Drive, which runs 2.77 miles inside the community, Skyline Drive at 2.06 miles, or Center Point Road at 1.8 miles. These paved corridors and driveways favor a bore path that passes beneath the surface instead of cutting across it.

CrossingTypeMapped extentWho has a say
Texas State Highway 27State highway4 roadway miles insideState highway office
RM 480State highway2.3 roadway miles insideState highway office
FM 1350State highway2.9 roadway miles insideState highway office
Guadalupe RiverStream4.78 channel miles insideChecked for Corps of Engineers jurisdiction
Verde CreekStream3.5 channel miles insideChecked for Corps of Engineers jurisdiction
Steel CreekStream0.86 channel miles insideChecked for Corps of Engineers jurisdiction
Elm CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Turtle CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Bluff CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Spring CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Center Point LakeLake or pond9 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Center Point community boundary or within one mile outside it, and no street and rail crossings are mapped. The Guadalupe River runs 4.78 channel miles inside the community, while Verde Creek runs 3.5 miles and Steel Creek 0.86 miles. Seven street crossings of named streams are mapped. Center Point Lake is a 9 acre pond inside the boundary, so a route near water needs crossing review before the bore plan is set.

Who approves a bore on Kerr County roads near Center Point?

Center Point is an unincorporated community with no city government, so local streets such as Memorial Boulevard are not city streets; the county or state has authority based on the road. For work in the right of way of Texas State Highway 27, RM 480 or FM 1350, the line owner submits the utility permit through TxDOT’s RULIS system, and the TxDOT San Antonio District reviews it. For Texas State Highway 27 work, we prepare the bore plan and profile under the utility owner’s permit through TxDOT San Antonio District. TxDOT cover rules set the bore depth: electric and communication lines need 60 inches below the lowest crossed grade, water lines 60 inches, and pressurized sewer lines 60 inches. A stream crossing such as the Guadalupe River is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines already in the ground in Kerr County near Center Point?

EPA drinking water records do not tie public water systems to Center Point, and no system carries the community’s name. That does not establish which provider serves an address. The water provider for the specific address has to be confirmed with the county or local water district before a bore is planned. Kerr County electric service reporting includes Kerrville Public Utility Board, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric Cooperative. We confirm the owner of the line on the route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Kerrville Public Utility Board, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Kerr CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Center Point’s median housing year at 1989, informing our underground work planning. The survey estimates 17% of homes were built before 1960, 49% from 1960 to 1999, and 34% in 2000 or later. Work along Skyline Drive may involve replacing an older buried line or connecting a newer service. We use hydrovac potholing to expose marked utilities before drilling near them, because locate paint shows position, not depth; homes from several building eras can mean different buried services.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Center Point in relation to Comfort and Kerrville?

Center Point is an unincorporated community in Kerr County, at an elevation of 1,591 feet and covering 5.33 square miles. Its ZIP code is 78010. Kerrville, the county seat and nearest larger city, is 8.7 miles northwest; Comfort is 9.0 miles east, and Bandera is 14.6 miles south. From our Yukon, Oklahoma main office, the trip to Center Point is 477 road miles and 9.8 drive hours. That distance is part of planning mobilization for work near Texas State Highway 27 or the Guadalupe River.

Places near Center Point

Which jobs call for a bore along Center Point Road in Center Point?

  • Highway crossing: A bore beneath Texas State Highway 27 keeps the line below the travel surface, with right of way work handled through the utility owner’s permit.
  • Water service: A connection near Center Point Road needs the water provider for that specific address confirmed before we settle the route.
  • Fiber conduit: A run along Skyline Drive can pass beneath pavement and driveways, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A route beneath Verde Creek or the Guadalupe River needs depth planning around the channel and a check for federal jurisdiction.
  • Electric conduit: Before work near Memorial Boulevard, we confirm the line owner because several electric utilities report service in Kerr County.
  • Lake crossing: A proposed route near Center Point Lake needs a site specific plan for the 9 acre pond and nearby access.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Memorial Boulevard in Center Point?

A map pin matters near Memorial Boulevard because a small shift can put the route closer to a street, marked utility or drainage crossing. For a Center Point Road request, we need the address or pin, what will go underground, pipe or conduit size, and footage. A sketch or plans for the Center Point location help us see the route and access before we prepare the scope.

Nuvalde clay and the chance of shallow bedrock matter first because they affect drilling and reaming. Next, the number of utilities to expose, and any Guadalupe River or drainage crossing, changes the work. Pavement near Texas State Highway 27, pipe size, bore length, pits, excavator time and sand backfill also shape the plan. Mobilization reflects the 477 road miles from Yukon. High profile or emergency work can add planning steps.

Questions people ask about boring in Center Point

Does Trinity take directional boring jobs in Center Point and Kerr County?

Yes. We take directional boring jobs in Center Point and staff the work with our own crews or from satellite yards run by partner drilling contractors we have vetted. For a Steel Creek crossing, we keep you with Trinity from the first call through the bore log, regardless of crew on site. Share the location near Texas State Highway 27 or another route so we can review the job.

What do older buried lines along Skyline Drive mean for a Center Point replacement bore?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1989, with 17% of homes built before 1960. Along Skyline Drive, a replacement may need to connect with an older buried line or serve later construction. We expose marked utilities before the drill gets near them, since surface marks do not show their depth.

Can wet or flood prone ground near the Guadalupe River affect Center Point bore pits?

It can affect where and how we place pits. Flood prone soils are mapped across 36% of Center Point, and the Guadalupe River crosses 4.78 channel miles inside the community. No seasonal water table is mapped within 60 inches, but that does not remove the need to plan around creek banks and check the crossing during route review.

Does Nuvalde soil in Center Point corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 45% of Center Point. Nuvalde is one of the mapped soil series, but the route specific survey does not decide pipe materials. The line owner selects coatings for steel casing or tracer wire; HDPE is not affected by the mapped soil corrosion concern.

What ground will a bore pass through in Center Point’s Nuvalde soil?

The USDA soil survey maps Nuvalde across 17% of Center Point, with silty clay loam and silty clay common at the surface. At about 40 inches, clay is mapped across 34% of the area and bedrock across 22%. Those are survey patterns, not test borings, so the exact route near Center Point Road still needs evaluation.

Is there rock in Center Point, and how much is mapped within five feet?

Bedrock is mapped within 60 inches across 22% of the community, and hard bedrock within that depth across 18%. Weathered bedrock is mapped across 4%. Near the Glen Rose Formation, a bore can encounter rock or a soil to rock change, which can slow drilling and affect steering.

How far is Center Point from the Yukon office, and does Kerrville affect the job?

Center Point is 477 road miles and a 9.8 drive hour trip from our Yukon, Oklahoma main office. Kerrville is 8.7 miles northwest and is the county seat. Distance affects mobilization planning for a bore near Texas State Highway 27, while the route, ground and crossings determine the rest of the job scope.

How much 811 notice does a Center Point bore near Center Point Drive need?

Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work near Center Point Drive starts more than 14 days after the original notice, file a new request. If marks wear off or move, have them refreshed through Texas811 before work continues.

What affects the cost of a Center Point bore under Texas State Highway 27?

The route and ground set the scope: Nuvalde clay or shallow bedrock can change drilling time, while marked lines and the highway crossing add exposure and permit planning. Bore length and pipe size matter, as do pavement, pits, excavator time, creek crossings and backfill. Mobilization from Yukon also factors into work in Center Point.

Where the Center Point facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Center Point

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Center Point, Texas

Type the address of your job in Center Point. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Center Point

All counties: Texas county list.