trinityboringsolutions.com

La Presa Texas Directional Boring: Copita Soil, Loop 20 And Becerra Creek

Quick Answer: If you are asking whether we can get a line under Loop 20 without cutting pavement, we can plan a La Presa bore when the route and approvals fit. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Loop 20 crossings in La Presa. La Presa is 646 road miles from our Yukon, Oklahoma main office, and Mangana Hein Road is one access detail to check. Copita soil covers 77 percent of the mapped area, and the survey maps bedrock within 60 inches across 87 percent, so the bore plan must account for changing ground. Becerra Creek is 0.4 miles from the mapped community boundary, which matters if your route approaches its channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

La Presa bores at a glance

  • Unincorporated community in Webb County, Texas. Population 241 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 646 miles, about 12.5 hours of driving.
  • Ground: Copita soil is mapped on 77 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 87 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Loop 20 and US 83.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Loop 20 in La Presa?

If you are asking whether we can get a line under Loop 20 without cutting pavement, we can plan a La Presa bore when the route and approvals fit. The Census Bureau counted 241 people here in the 2020 Census. Along Karina Road or Mangana Hein Road, we install water, sewer, gas, electric conduit and fiber lines by bore where the route and site conditions allow.

Our main office is in Yukon, Oklahoma, and La Presa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical La Presa job is much shorter, with the route shaped by local streets such as Karina Road and the ground mapped around them.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should I expect when drilling in La Presa Copita soil?

The USDA soil survey maps Copita soil across 77 percent of La Presa, so fine sandy loam is the main surface condition to plan around. Verick accounts for 10 percent, Tela for 8 percent and Jimenez for 3 percent. At about 40 inches below the surface, the survey maps bedrock across 77 percent of the area and cemented bedrock across 10 percent; sandy clay loam is mapped across 8 percent. Average clay content at that depth is 27 percent. These are mapped soil patterns, not test borings, so the actual route needs field verification.

USDA soil survey, inside the La Presa mapped community boundaryWhat is mapped
Soil series mappedCopita 77 percent, Verick 10 percent, Tela 8 percent and Jimenez 3 percent
Texture at the surfacefine sandy loam 87 percent, sandy clay loam 8 percent and very gravelly sandy clay loam 3 percent
Texture about 40 inches downbedrock 77 percent, cemented bedrock 10 percent and sandy clay loam 8 percent
Engineering class about 40 inches downlean clay (CL) 8 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches87 percent of the area (0 percent hard rock, 87 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel77 percent of the area

The survey maps weathered bedrock within 60 inches across 87 percent of La Presa, with typical bedrock depth at 34 inches; hard bedrock is not mapped within that depth. That shallow, weathered material can slow drilling and make the soil to rock transition a steering concern. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 8 percent. The Laredo Formation, of Eocene age, includes sandstone and clay. High steel corrosion risk is mapped across 77 percent, so the line owner should consider protection for steel casing and tracer wire.

How do we run a La Presa bore through mapped bedrock?

In La Presa, the Copita soil and shallow weathered bedrock call for a bore plan that follows changing resistance rather than assuming one steady layer. We track the drill head from the surface and log its depth and pitch.

  1. Copita soil is mainly fine sandy loam, so we keep the hole supported as it opens and have the pipe ready before the final reaming pass.
  2. With bedrock mapped within 60 inches across 87 percent of La Presa, we track depth and pitch closely as the bit meets changing ground.
  3. Where the Laredo Formation sandstone and clay meet, a change in resistance can affect steering, so we adjust the bore path as readings change.
  4. Near Becerra Creek, we plan the crossing depth around the channel and check jurisdiction before setting the route; pits stay on the banks rather than cutting them.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What does a bore have to cross on Mangana Hein Road in La Presa?

Loop 20 runs along or touches the mapped La Presa community boundary, while US 83 is 1.3 miles outside it; no highway is mapped inside the community. Mangana Hein Road has 2.4 miles within the boundary, and Mangana-Hein Road is also listed with 2.4 miles. Karina Road has 0.42 miles and Sciaraffa Parkway has 0.26 miles. Those named routes help locate a proposed crossing, but the exact alignment and surface conditions determine bore placement.

CrossingTypeMapped extentWho has a say
Loop 20Highway nearbyRuns along or touches the city limitsState highway office
US 83Highway nearby1.3 miles outsideState highway office
Becerra CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
San Ramon LakeLake or pond4 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad miles or railroad crossings are mapped within one mile of La Presa, and no mapped street crossing intersects a railroad. No named stream runs inside the community; Becerra Creek is 0.4 miles from its boundary, so a nearby channel route needs separate review. San Ramon Lake is a 4 acre lake outside the boundary and within one mile. A route near either water feature needs site specific planning rather than assumptions based on the map.

Who approves a La Presa bore in Webb County?

La Presa is an unincorporated community, so it has no city government; county or state authority applies to its streets and road crossings. For work in TxDOT right of way at Loop 20 or US 83, the utility owner submits the utility permit application through RULIS, and the TxDOT Laredo District reviews it. We prepare the bore plan and profile for the owner’s application. At a highway crossing, cover is generally 60 inches for electric, communication and water lines, and pressurized sewer lines, subject to any depth set in the permit. A route near Becerra Creek is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should we check in Webb County near La Presa?

For a La Presa address near Karina Road, the water provider for the specific address has to be confirmed with the county or local water district before a bore is planned. Public drinking water records do not identify a provider tied to this place, so the address needs confirmation before we set a route. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Webb County; the line owner for the particular address must be confirmed before a conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Webb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put La Presa’s median housing year at 2001; 10 percent of units were built before 1960, 38 percent from 1960 to 1999 and 52 percent in 2000 or later. That mix can mean both replacement work and new service routes along streets such as Mangana Hein Road. Before drilling near a marked line, we use hydrovac potholing to expose it; paint shows its position, not its depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near La Presa and Rio Bravo?

La Presa is in Webb County, covers 0.5 square miles and sits at 518 feet elevation in ZIP code 78046. Rio Bravo is 4.0 miles southwest, and El Cenizo is 6.3 miles southwest. Laredo, the county seat and nearest larger city, is 11.6 miles north. From our Yukon yard, La Presa is 646 road miles away and a 12.5 hour drive. That distance matters to mobilization, while the nearby Loop 20 corridor helps identify the highway context for a proposed bore.

Places near La Presa

What boring work could come up near Karina Road in La Presa?

  • Highway crossing: A Loop 20 bore can keep the travel surface intact, with alignment and cover addressed through the applicable TxDOT review.
  • Water service: A line toward a Karina Road property can be installed by bore where the planned route avoids marked utilities.
  • Fiber conduit: Along Mangana Hein Road, potholing marked utilities helps establish their depth before a fiber bore advances.
  • Creek crossing: A route near Becerra Creek needs channel depth planning and a jurisdiction check before the bore path is set.
  • Lake approach: A route near San Ramon Lake needs its actual boundary and access checked; the mapped lake is outside La Presa.
  • New service: With 52 percent of housing units built in 2000 or later, new service work may follow streets such as Sciaraffa Parkway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a La Presa quote near Becerra Creek?

For a La Presa quote, send the address or map pin, what is going underground, pipe or conduit size and footage; a sketch or plans help us evaluate a route crossing Mangana Hein Road. Note any known utility marks or pavement near Karina Road, since those details affect where the bore can be placed.

La Presa is 646 road miles from Yukon, so mobilization is part of the job scope. Copita soil and the shallow weathered bedrock can change drilling time and tooling. A Loop 20 crossing or a route near Becerra Creek adds its own planning and access questions. Length, pipe or conduit size, marked utilities, pavement, pits, excavator time and sand backfill also affect the work. High profile or emergency timing can require a different plan.

Questions people ask about boring in La Presa

Does Trinity take directional boring work in La Presa, Webb County, and who staffs it?

Yes, we take directional boring work in La Presa, Webb County. Our own crews and vetted partner drilling contractors can staff the work from satellite yards, while you deal with Trinity from the first call through the bore log. A route near Loop 20 still depends on the site and applicable approvals.

How much rock is mapped in La Presa, and is it hard bedrock?

The USDA soil survey maps bedrock within 60 inches across 87 percent of La Presa, mostly weathered rather than hard bedrock. Typical depth is 34 inches, and hard bedrock is not mapped within 60 inches. This map does not replace a site investigation, so the actual route can reveal different conditions.

Who reviews a bore under Loop 20 in La Presa?

For a Loop 20 bore in TxDOT right of way, the utility owner applies through RULIS and the TxDOT Laredo District reviews the permit. We provide the plan and profile for that application. The permitted cover depth depends on line type and the approved crossing plan.

Can you bore a line under Becerra Creek near La Presa?

A bore can be planned beneath a route near Becerra Creek without cutting the creek bank, subject to the site conditions and approvals. The creek is 0.4 miles from La Presa’s mapped boundary, and its channel depth and jurisdiction need review before we set the bore path.

Which electric companies report service in Webb County near La Presa?

AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Webb County, but that does not identify the provider at every La Presa address. We confirm the specific line owner before planning a conduit bore near Mangana Hein Road, along with the conduit requirements for that line.

Who controls streets like Karina Road in La Presa, and can a bore avoid cutting them?

La Presa has no city government because it is an unincorporated community, so county or state authority applies to streets such as Karina Road. Directional boring can pass beneath a road without opening its surface when the route and conditions allow. The responsible authority and site plan still need to be checked.

How far is La Presa from Yukon through Laredo, and does the distance affect the job?

La Presa is 646 road miles and a 12.5 hour drive from our Yukon, Oklahoma main office. Laredo is 11.6 miles north of La Presa. The Yukon distance can affect crew mobilization, while the route near Loop 20 and the ground conditions affect the work plan.

How early should I call Texas811 for a bore on Mangana Hein Road in La Presa?

For a bore on Mangana Hein Road, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed before work continues.

What affects the cost of directional boring near Loop 20 in La Presa?

The job scope sets the price for a La Presa bore near Loop 20. Length, pipe size, Copita soil and weathered bedrock affect the drilling; crossings, pavement, utility exposure, pits and backfill affect the setup. The 646 road miles from Yukon also matter to mobilization, and creek or drainage work can add planning needs.

Where the La Presa facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in La Presa

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in La Presa, Texas

Type the address of your job in La Presa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for La Presa

Same county: Ranchos Penitas West · Pueblo Nuevo · Bruni · Mirando City · Oilton · San Carlos I · Colorado Acres · Ranchitos Las Lomas · San Carlos II · Ranchitos East · Los Arcos · Botines. All counties: Texas county list.