trinityboringsolutions.com

Santa Rita Ranch Texas Directional Boring: Fairlie Clay, Highway 29, Middle Fork River

Quick Answer: Before a bore near Cross Creek Lane, confirm the water provider for the address with Williamson County or the local water district, and identify the electric line owner. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes near the Middle Fork San Gabriel River in Santa Rita Ranch, Texas. Cross Creek Lane is 382 road miles from our Yukon, Oklahoma main office, with Liberty Hill 4.5 miles west. Fairlie clay and mapped bedrock call for a plan that accounts for sticky ground and rock.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Santa Rita Ranch bores at a glance

  • Unincorporated community in Williamson County, Texas. Population 3,152 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 382 miles, about 7.4 hours of driving.
  • Ground: Fairlie soil is mapped on 47 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 99 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Texas State Highway 29 and US 183.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Middle Fork San Gabriel River and Sowes Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Middle Fork San Gabriel River in Santa Rita Ranch?

Trinity Boring Solutions takes directional boring work in Santa Rita Ranch, including routes near Cross Creek Lane and the Middle Fork San Gabriel River. The Census Bureau counted 3,152 people here in the 2020 Census; it does not publish yearly estimates for this unincorporated place. We install water, sewer, gas, electric conduit and fiber lines along local streets or beneath crossings.

Our main office is in Yukon, Oklahoma, and Santa Rita Ranch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965, with directional boring work dating to 1982. For a route near Cross Creek Lane, our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does Fairlie soil mean for a bore in Santa Rita Ranch?

The USDA soil survey maps Fairlie across 47 percent of Santa Rita Ranch, with Fairlie clay map units covering 29 percent and 17 percent in different slope classes. Georgetown soil series covers 28 percent, while Eckrant covers 12 percent and Brackett 7 percent. At about 40 inches below the surface, the mapped texture is bedrock in 52 percent of the area and clay in 47 percent. The survey maps heavy clay across 47 percent at that depth, with CH clay mapped in 47 percent. These are mapped patterns, not test borings. Sticky clay can load a reamer and grip pipe, so staged reaming and fluid control matter.

USDA soil survey, inside the Santa Rita Ranch mapped community boundaryWhat is mapped
Soil series mappedFairlie 47 percent, Georgetown 28 percent, Eckrant 12 percent and Brackett 7 percent
Texture at the surfaceclay 49 percent, stony clay loam 27 percent and gravelly clay loam 7 percent
Texture about 40 inches downbedrock 52 percent and clay 47 percent
Engineering class about 40 inches downfat clay (CH) 47 percent
Average clay content about 40 inches down49 percent
Bedrock mapped within 60 inches99 percent of the area (45 percent hard rock, 54 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel92 percent of the area

Bedrock is mapped within five feet across 99 percent of Santa Rita Ranch, with hard bedrock mapped across 45 percent and weathered bedrock across 54 percent. That points to variable drilling time and a possible change in tooling along a route. Seasonal water table and flood prone soils are not mapped in the top five feet, but steel corrosion risk is mapped across 92 percent, so the line owner should consider casing and tracer wire materials. The map also shows Pleistocene alluvium of clay, silt, sand and gravel, as well as Albian Edwards and Comanche Peak limestones; the change from soil to limestone can affect steering.

How do we drill through mapped bedrock in Santa Rita Ranch?

For a Santa Rita Ranch route, we match the drilling setup to the Fairlie clay and the mapped limestone rather than treating the whole alignment as one material. We use horizontal directional drilling (HDD) to keep streets and creek banks uncut.

  1. Fairlie clay can cling to the reamer, so we use thinner drilling fluid with polymer, open the hole in stages and plan to pull pipe the same day.
  2. With heavy clay mapped in Santa Rita Ranch, we watch fluid returns near pavement so pressure does not lift the surface along a street such as Cross Creek Lane.
  3. Where the route meets mapped Edwards and Comanche Peak limestone, we slow down and select a rock cutting setup suited to the hard layer.
  4. Before drilling near a marked utility along Ronald Reagan Boulevard, we expose it with hydrovac; a surface locator tracks the head and logs depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What might a bore cross near Texas State Highway 29 in Santa Rita Ranch?

Texas State Highway 29 runs along or touches the mapped community boundary, and US 183 is 0.8 miles outside it. No highway is mapped inside the community, so the route and boundary matter when planning access. Inside Santa Rita Ranch, Cross Creek Lane is the longest named street at 1.94 miles, followed by Ronald Reagan Boulevard at 1.87 miles and Santa Rita Boulevard at 0.66 miles. A bore along one of these roads may need to pass beneath pavement or other marked utilities without opening the surface.

CrossingTypeMapped extentWho has a say
Texas State Highway 29Highway nearbyRuns along or touches the city limitsState highway office
US 183Highway nearby0.8 miles outsideState highway office
Middle Fork San Gabriel RiverStream2.33 channel miles insideChecked for Corps of Engineers jurisdiction
Sowes BranchStream0.85 channel miles insideChecked for Corps of Engineers jurisdiction
Hunt HollowStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
North Fork San Gabriel RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Sycamore HollowStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Lake GeorgetownLake or pond1,164 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Santa Rita Ranch or within 1 mile outside the community, and no mapped street and rail crossings are recorded. The Middle Fork San Gabriel River runs 2.33 channel miles inside the community, while Sowes Branch runs 0.85 miles; three mapped street crossings pass over named streams. Lake Georgetown is within 1 mile but outside the boundary. A planned river or creek crossing needs a check for U.S. Army Corps of Engineers jurisdiction.

Who approves a bore in Williamson County near Santa Rita Ranch?

Santa Rita Ranch is an unincorporated community with no city government, so local streets and permits fall to the county or state rather than a city hall. For work in the right of way of Texas State Highway 29 or US 183, the utility owner files the TxDOT permit through RULIS; the TxDOT Austin District reviews it. We provide the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover rules set 60 inches at highway crossings for electric, communication and water lines, and the permit may require another depth. A Middle Fork San Gabriel River crossing is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Williamson County at Santa Rita Ranch?

The water provider for a specific Santa Rita Ranch address has to be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not tie a system to this place. Electric service reported in Williamson County includes Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the line owner at every Cross Creek Lane address, so confirm the owner before planning a conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Williamson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Santa Rita Ranch’s median housing year at 2017, with all housing units built in 2000 or later. That pattern points more toward new service connections than widespread replacement of older pipe, though a route near Ronald Reagan Boulevard still needs field checks. Before drilling near a marked line, we hydrovac pothole to expose it; surface paint shows its position, not its depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Santa Rita Ranch near Liberty Hill?

Santa Rita Ranch is in Williamson County, at an elevation of 1,019 feet, and covers 3.95 square miles in ZIP code 78642. Liberty Hill is 4.5 miles west, Leander is 6.4 miles south, and Georgetown, the county seat, is 7.8 miles east. Georgetown is also the closest listed county seat, while Liberty Hill is the nearest larger city. From our Yukon, Oklahoma main office, the trip is 382 road miles and 7.4 hours, which affects equipment mobilization for a Cross Creek Lane project.

Places near Santa Rita Ranch

What boring work could run along Cross Creek Lane in Santa Rita Ranch?

  • Highway crossing: A bore near Texas State Highway 29 can pass beneath pavement and travel lanes without cutting across the road surface.
  • Water service: A new service along Cross Creek Lane needs the address specific provider confirmed before the route and connection are planned.
  • Fiber conduit: A fiber route beneath Ronald Reagan Boulevard can avoid an open cut through the paved street.
  • Creek crossing: A route beneath the Middle Fork San Gabriel River needs a planned path and a jurisdiction check before drilling.
  • Electric conduit: Along Santa Rita Boulevard, confirm which Williamson County reported electric provider owns the line before setting conduit specifications.
  • Residential service: New lines near Andele Way can be planned around marked utilities and the clay and bedrock mapped in the community.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Ronald Reagan in Santa Rita Ranch?

For a quote near Ronald Reagan Boulevard, first give us the address or map pin and what the line will carry. Then tell us the pipe or conduit size and the footage, such as a short service run or a longer route toward Texas State Highway 29. A sketch or plans help show the proposed path and crossings.

In Santa Rita Ranch, soil and rock are early cost factors because Fairlie clay can cling to the reamer and mapped bedrock may slow the bore. The number of utilities to expose, plus any pavement or concrete along Cross Creek Lane, affects the work plan. Creek crossings add planning, and length, line size, pits, excavator time and sand backfill also shape the job. Mobilization matters on a route 382 road miles from Yukon. High profile or emergency work can also change the scope.

Questions people ask about boring in Santa Rita Ranch

Does Trinity take directional boring jobs in Williamson County at Santa Rita Ranch?

Yes. Trinity Boring Solutions takes work in Santa Rita Ranch and across Texas. Our crews handle jobs directly, and work can also be staffed from satellite yards operated by partner drilling contractors we have vetted. For a route near Cross Creek Lane, you work with Trinity through planning and the bore log.

What ground should I expect in Santa Rita Ranch where Fairlie soil is mapped?

Fairlie clay is the largest mapped soil series, covering 47 percent of Santa Rita Ranch. At about 40 inches below the surface, the USDA soil survey maps bedrock across 52 percent and clay across 47 percent. Clay can stick to the reamer and grip pipe, so drilling fluid and reaming stages need attention.

How much bedrock is mapped in the top five feet at Santa Rita Ranch?

Bedrock is mapped within five feet across 99 percent of Santa Rita Ranch. The survey maps hard bedrock across 45 percent and weathered bedrock across 54 percent. Those are soil survey estimates, not test results for a Cross Creek Lane parcel, so site conditions can vary along a proposed bore.

Who permits a bore beneath Texas State Highway 29 at Santa Rita Ranch?

The utility owner applies for a TxDOT utility permit when work is in the Texas State Highway 29 right of way. The TxDOT Austin District reviews the application, and Trinity supplies the bore plan and profile. That process matters where the highway runs along or touches the Santa Rita Ranch boundary.

Can a line be bored beneath the Middle Fork San Gabriel River at Santa Rita Ranch?

A bore can be planned beneath the Middle Fork San Gabriel River, but the route needs review for U.S. Army Corps of Engineers jurisdiction. The river has 2.33 channel miles inside Santa Rita Ranch. Ground conditions, access and the line path determine the drilling plan for that crossing.

Which electric company owns the lines in Williamson County at Santa Rita Ranch?

The county reports service from Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the owner at a particular Santa Rita Ranch address. Confirm the line owner and conduit specifications before planning work near Ronald Reagan Boulevard.

Does Trinity cover Liberty Hill and rural sites outside Santa Rita Ranch?

Yes. Trinity takes work across Texas, including Liberty Hill and rural locations outside the Santa Rita Ranch community boundary. Liberty Hill is 4.5 miles west of Santa Rita Ranch. For a project near Cross Creek Lane or beyond the mapped boundary, the address and route help us plan the job.

How much Texas811 notice is needed for a Santa Rita Ranch bore along Cross Creek Lane?

The person arranging the bore must request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request. Worn or moved marks along Cross Creek Lane must be refreshed through Texas811 before work continues.

What affects the cost of a Santa Rita Ranch bore near Texas State Highway 29?

The main factors are the clay and bedrock, bore length and line size, marked utilities to expose, pavement, and any creek crossing. A route near Texas State Highway 29 may also involve right of way planning. Pits, equipment time and mobilization from the Yukon office affect the job scope too.

Where the Santa Rita Ranch facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Santa Rita Ranch

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Santa Rita Ranch, Texas

Type the address of your job in Santa Rita Ranch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Santa Rita Ranch

Same county: Round Rock · Austin · Hutto · Brushy Creek · Taylor · Jarrell · Florence · Granger · Bartlett · Thrall · Weir · Coupland. All counties: Texas county list.