Hutto Texas Directional Boring: Branyon Clay, Cottonwood Creek, Union Pacific
Quick Answer: Hutto is an incorporated city, so its streets belong to the city; Trinity handles directional boring, also called horizontal directional drilling (HDD), for routes near 2nd Street. That street is 383 road miles from our Yukon, Oklahoma main office, and Cottonwood Creek adds a separate crossing condition. Branyon soil covers much of Hutto, with heavy clay common about 40 inches down; sticky cuttings call for staged reaming and controlled fluid. Union Pacific track and US 79 also shape route planning.
Hutto bores at a glance
- Incorporated city in Williamson County, Texas. Population 42,661 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 383 miles, about 7.3 hours of driving.
- Ground: Branyon soil is mapped on 64 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 6 percent of the area.
- Highways inside the boundary: US 79, FM 1660, Texas State Highway 130, FM 685 and FM 3349. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: Union Pacific, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Cottonwood Creek, Brushy Creek, South Fork Mustang Creek and Boggy Creek.
- Public water: City of Hutto, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring near Cottonwood Creek in Hutto?
Trinity Boring Solutions takes directional boring work in Hutto, Williamson County, including routes serving 2nd Street. Hutto is an incorporated city, so its streets belong to the city itself. With Hutto’s Census Bureau Vintage 2024 estimate at 42,661, we still plan underground work around the specific address. We install water, sewer, gas, electric conduit and fiber for routes along streets, beneath US 79, or near Cottonwood Creek.
Our main office is in Yukon, Oklahoma, and Hutto work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record is no utility strike in over 25 years, a practical concern where a new bore meets the City of Hutto water system or electric lines reported in Williamson County. We are a family business started in 1965, with directional boring work dating to 1982.

What does Branyon soil mean for a bore in Hutto?
The USDA soil survey maps Branyon as Hutto’s main soil series, covering 64 percent of the city. Its map units include Branyon clay at 0 to 1 percent slopes across 20 percent and at 1 to 3 percent slopes across 19 percent; Branyon Urban land complex covers 18 percent. About 40 inches below the surface, clay accounts for 81 percent of mapped texture and silty clay for 7 percent. Average clay content at that depth is 50 percent, and heavy clay is mapped across 88 percent. These are mapped patterns, not test results for an individual route.
| USDA soil survey, inside the Hutto city limits | What is mapped |
|---|---|
| Soil series mapped | Branyon 64 percent, Burleson 9 percent, Krum 6 percent, Austin 5 percent and Oakalla 4 percent |
| Texture at the surface | clay 81 percent, silty clay 11 percent and silty clay loam 6 percent |
| Texture about 40 inches down | clay 81 percent, silty clay 7 percent and bedrock 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 87 percent and lean clay (CL) 6 percent |
| Average clay content about 40 inches down | 50 percent |
| Bedrock mapped within 60 inches | 6 percent of the area (0 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 94 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 6 percent of Hutto, with typical bedrock depth at 26 inches; the mapped bedrock is weathered, and hard bedrock is not mapped in that depth. Seasonal water table soils are not mapped, while flood prone soils cover 7 percent, so Cottonwood Creek routes still need channel depth planning. High steel corrosion risk covers 94 percent, which matters for casing and tracer wire; the line owner selects any coating, while HDPE is not affected by soil corrosion. The map also shows High gravel deposits of Pleistocene age and Late Cretaceous sedimentary material, so conditions can change along a bore.
How do crews work through Hutto clay?
For Hutto’s Branyon heavy clay, we manage fluid and reaming to keep sticky cuttings moving without building excess pressure beneath pavement on 2nd Street.
- Branyon clay can stick to the reamer and grip pipe, so we use thinner fluid with polymer and stage the reaming before pulling pipe the same day.
- Because heavy clay is mapped across much of Hutto, we watch fluid returns near 2nd Street and keep pressure controlled to avoid lifting pavement.
- Before drilling near a marked line on Carl Stern Drive, we hydrovac pothole it; locate paint shows position, not the utility’s depth.
- At Cottonwood Creek, crews track the drill head from the surface and log depth and pitch as the path passes beneath the channel.

What can a new line cross along 2nd Street in Hutto?
Hutto routes can meet US 79, FM 1660, Texas State Highway 130, FM 685 and FM 3349, each with different access and right of way conditions. US 79 has 6.4 mapped roadway miles inside the city, while FM 1660 has 7.2. Among the named streets, 2nd Street runs 2.6 miles, Carl Stern Drive 2.36 miles and Chris Kelley Boulevard 1.7 miles. These streets give a route plan more than one possible corridor, but pavement and utility crossings affect where pits can fit.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 79 | US highway | 6.4 roadway miles inside | State highway office |
| FM 1660 | State highway | 7.2 roadway miles inside | State highway office |
| Texas State Highway 130 | State highway | 1.8 roadway miles inside | State highway office |
| FM 685 | State highway | 1.5 roadway miles inside | State highway office |
| FM 3349 | State highway | 0.8 roadway miles inside | State highway office |
| Union Pacific | Railroad | 6.16 track miles inside | The railroad |
| Cottonwood Creek | Stream | 6.09 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brushy Creek | Stream | 2.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
| South Fork Mustang Creek | Stream | 1.27 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Boggy Creek | Stream | 0.48 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Mustang Creek | Stream | 0.18 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mustang Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| McNutt Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Mc Nutt Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 6.16 track miles in Hutto on the Union Pacific Austin Subdivision, and public mapping records 11 street and rail crossings in the city. A track route needs coordination around that railroad corridor. Cottonwood Creek runs 6.09 channel miles here, and Brushy Creek runs 2.56; public mapping records 8 street crossings of named streams. Creek banks and channels need depth planning, while no lakes or ponds are mapped within one mile of Hutto.
Do I need approval for a Hutto bore near Union Pacific track?
For US 79, FM 1660, Texas State Highway 130, FM 685 or FM 3349 right of way, the line owner files through TxDOT’s RULIS system, and the TxDOT Austin District reviews it; Trinity prepares the bore plan and profile for that filing. Electric and communication lines need 60 inches of cover at highway crossings and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it, while pressurized sewer needs 60 inches at crossings. Existing highway pavement is bored or tunneled, with crossings encased. Union Pacific sets terms through its crossing agreement, and Cottonwood Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines should we check in Williamson County near Hutto?
The City of Hutto public water system uses purchased surface water and reports 7,839 service connections serving 29,580 people. That network matters when a new route follows 2nd Street or ties into an existing service. Electric service reported in Williamson County includes Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. For an electric conduit bore in Hutto, we confirm the line owner at the specific address before planning the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Hutto | Public water system | Surface water bought from another system | 7,839 connections, 29,580 people served |
| Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Williamson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Hutto’s median housing year at 2008; 92 percent of units were built in 2000 or later and 2 percent before 1960. A bore along Carl Stern Drive may serve a newer connection or replace an older line, so the address and route matter more than the citywide pattern. Paint shows utility position, not depth; we hydrovac pothole each marked line along the bore path before drilling near it.

Where does Hutto sit relative to Round Rock?
Hutto is in Williamson County, at elevation 654 feet, and covers 14.79 square miles. Its ZIP code is 78634. Round Rock, the nearest larger city, is 7.2 miles west; Taylor is 7.1 miles east, and Pflugerville is 7.3 miles southwest. Georgetown, the county seat, is 12.7 miles northwest. From our Yukon, Oklahoma main office, Hutto is 383 road miles away, a 7.3 hour drive. That distance is part of planning mobilization for work on US 79 or near Cottonwood Creek.
Places near Hutto
- Directional boring in Taylor: 7.1 miles east
- Directional boring in Round Rock: 7.2 miles west
- Directional boring in Pflugerville: 7.3 miles southwest
- Directional boring in Weir: 9.7 miles north
- Directional boring in Wells Branch: 10.5 miles southwest
What could a bore along Carl Stern Drive serve in Hutto?
- Highway crossing: A new conduit beneath US 79 uses a bored route, with TxDOT review applying where the work enters highway right of way.
- Water service: A connection near 2nd Street can tie into the City of Hutto water network after the existing route is exposed.
- Fiber route: Fiber conduit along Carl Stern Drive can pass beneath pavement and marked utilities without cutting the street surface.
- Creek crossing: A Cottonwood Creek bore plans depth beneath the channel and checks for Corps jurisdiction during planning.
- Rail crossing: A route beneath Union Pacific track needs an agreement with the railroad that sets the crossing conditions.
- Line replacement: Near Chris Kelley Boulevard, potholing along the planned path helps identify existing lines before a replacement bore begins.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Hutto bore near Chris Kelley Boulevard?
For a Hutto quote, start with the address or map pin, such as a location on Chris Kelley Boulevard. Tell us what goes in the ground, whether it is a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show nearby US 79 access, pavement, utilities and any Cottonwood Creek crossing.
Branyon heavy clay is the first cost factor because sticky cuttings can call for staged reaming and careful fluid control. Pipe or conduit size, bore length and the number of utilities to expose also shape the work. A route beneath US 79 or Union Pacific track adds crossing requirements; pavement, creek access, pits, excavator time and sand backfill can add scope. Mobilization reflects the 383 road miles from Yukon, and high profile or emergency work changes planning needs.
Questions people ask about boring in Hutto
Does Trinity take directional boring work in Williamson County near Hutto, and who staffs it?
Yes, Trinity takes directional boring jobs in Hutto, and the work is handled by our own crews or crews from partner drilling contractors we have vetted. You work with Trinity from the initial call through the bore log, whichever crew is on site. That staffing approach applies to routes near 2nd Street as well as other Hutto locations.
How do Hutto housing age and buried lines affect replacement bores on Carl Stern Drive?
Hutto’s housing stock is mostly newer, but replacement work still depends on the specific Carl Stern Drive address and existing utilities. American Community Survey 2019 to 2023 estimates put the median year built at 2008, with 2 percent of units built before 1960. We expose marked lines before drilling near them, since a citywide age estimate cannot show what is under one route.
Does Branyon soil in Hutto corrode steel, and what pipe can a bore use?
The USDA soil survey maps high steel corrosion risk across 94 percent of Hutto, including areas with Branyon soil. The line owner selects coatings for steel casing or tracer wire. HDPE does not share that steel corrosion concern, but the right material depends on the line design and owner’s specifications along the planned route.
What ground does a bore pass through in Hutto where Branyon is mapped?
Branyon is Hutto’s most common mapped soil series, covering 64 percent of the city. At about 40 inches below the surface, the USDA soil survey maps clay across 81 percent and silty clay across 7 percent; average clay content is 50 percent. Those mapped conditions can mean sticky cuttings and careful reaming, but they are not test borings at a particular address.
How much rock is mapped within five feet of the surface in Hutto?
Bedrock is mapped within 60 inches in 6 percent of Hutto, with typical depth at 26 inches; the mapped bedrock is weathered. For a Hutto bore, we account for the fact that hard bedrock is not mapped within that depth when planning the route. The city’s geologic mapping also includes High gravel deposits of Pleistocene age and Late Cretaceous sedimentary material, so a route still needs site specific planning.
Who approves a Hutto bore under US 79, and which TxDOT office reviews it?
For work in US 79 right of way, the line owner applies in TxDOT’s RULIS system, not the drilling contractor. The TxDOT Austin District reviews the filing. Trinity supplies the bore plan and profile for the owner’s application, and the permit sets the work conditions for the crossing.
How far is Hutto from the Yukon office, and does Round Rock change mobilization?
Hutto is 383 road miles and a 7.3 hour drive from our Yukon, Oklahoma main office, so we plan travel before scheduling the bore. Round Rock is 7.2 miles west of Hutto, but it does not change the route distance from Yukon. Mobilization is considered with the bore scope, access and crossing conditions at the Hutto jobsite.
How much Texas811 notice should I give for a Hutto bore near 2nd Street?
For a bore near 2nd Street, request a Texas811 locate at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Hutto work, if the start slips more than 14 days past the original notice, we submit a new request to keep the bore schedule current. Marks that wear off or move must be refreshed through Texas811 before work continues; paint does not show depth.
What affects directional boring costs near US 79 in Hutto?
A Hutto bore’s cost depends on its length and pipe or conduit size, then on ground and crossing conditions. Branyon heavy clay can affect reaming and fluid control, while a US 79 crossing may require highway planning. The number of utilities to expose, pavement, creek access, pits and distance from Yukon also affect the job scope.
Where the Hutto facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hutto
- U.S. Census Bureau, TIGER/Line 2024: Hutto boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Hutto
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hutto housing units and year built
- Macrostrat geologic map compilation: map units under Hutto
- U.S. EPA Safe Drinking Water Information System: public water systems serving Hutto
- U.S. Department of Transportation, North American Rail Network: track owners in Williamson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Williamson County
- U.S. Geological Survey, Elevation Point Query Service: Hutto elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hutto
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hutto
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hutto, Texas
Type the address of your job in Hutto. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hutto
Same county: Georgetown · Leander · Cedar Park · Austin · Brushy Creek · Liberty Hill · Jarrell · Serenada · Florence · Granger · Bartlett · Thrall. All counties: Texas county list.
