Serenada Texas Directional Boring: Eckrant Soil, Pecan Branch And Limestone
Quick Answer: Can we get your line beneath Pecan Branch without cutting the bank? Yes, Trinity Boring Solutions handles that with directional boring, also called horizontal directional drilling (HDD), in Serenada. Our Yukon, Oklahoma main office is 369 road miles from Serenada, near Georgetown 3.1 miles south. Eckrant soil covers 75 percent of the mapped area, and shallow limestone calls for rock focused planning. Texas State Highway 195 sits 0.9 miles outside the community boundary.
Serenada bores at a glance
- Unincorporated community in Williamson County, Texas. Population 2,098 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 369 miles, about 7.2 hours of driving.
- Ground: Eckrant soil is mapped on 75 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 98 percent of the area.
- No state or US highway is mapped inside the boundary. Closest: Texas State Highway 195.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Pecan Branch and Berry Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Texas State Highway 195 in Serenada?
We handle directional boring for Serenada, an unincorporated community in Williamson County with 2,098 people in the 2020 Census count. Can we carry your line beneath Pecan Branch or a Serenada street without opening the surface? We can plan water, sewer, gas, electric conduit or fiber routes along streets such as Logan Ranch Road.
Our main office is in Yukon, Oklahoma, and Serenada work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started as a family business in 1965 and have bored since 1982. Four decades of boring matter where Serenada’s Eckrant soil meets mapped limestone and the plan must account for rock.

What does the soil survey show about Serenada and Eckrant soil?
The USDA soil survey maps Eckrant soil across 75 percent of Serenada, with Georgetown soil covering 23 percent. Eckrant stony clay is mapped across 31 percent, and very cobbly clay across 34 percent. At about 40 inches, bedrock is the mapped texture across 98 percent of the community, with average clay content of 30 percent at that depth. These are mapped patterns, not site borings. The clay can cling to a reamer, so we plan staged reaming and fluid for the ground we encounter.
| USDA soil survey, inside the Serenada mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Eckrant 75 percent and Georgetown 23 percent |
| Texture at the surface | very cobbly clay 34 percent, stony clay 31 percent and stony clay loam 20 percent |
| Texture about 40 inches down | bedrock 98 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | 98 percent of the area (98 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 98 percent of the area |
The USDA soil survey places typical bedrock depth at 17 inches, and hard bedrock is mapped within 60 inches across 98 percent of Serenada. The Edwards and Comanche Peak Limestones, undivided, are mapped here as Albian age rock. A rock bit or other rock tooling may be needed, with careful steering where soil meets limestone. No seasonal water table is mapped within 60 inches, while flood prone soils cover 2 percent. Serenada’s high steel corrosion risk covers 98 percent, so we consider casing and tracer wire materials in Eckrant soil.
How do we bore Serenada ground with bedrock near the surface?
Serenada’s Eckrant soil and shallow limestone call for a bore plan that can shift from clay to rock. We track the drill head from the surface and log its depth and pitch as it advances.
- On Logan Ranch Road, we expose each marked utility on the bore path with hydrovac before drilling near it, since paint does not show depth.
- Where Eckrant stony clay holds the hole, we use staged reaming and suitable fluid, then plan to pull the line while the bore is open.
- With limestone mapped shallow across Serenada, we choose rock tooling when needed and check the drill head depth and pitch at each rod.
- For a Pecan Branch crossing, we plan the path beneath the channel, place pits in the dirt on each side and check for federal jurisdiction.

Where does a Serenada line have to go under Pecan Branch?
Texas State Highway 195 is 0.9 miles outside Serenada’s mapped community boundary, and no highway is mapped inside it. Logan Ranch Road runs 2.34 miles within the community, Sequoia Trail runs 2.21 miles, and Esparada Drive runs 1.75 miles. Serenada Drive adds another local route. A bore can keep pavement and driveways uncut, but the route and access pits need to fit the street and the shallow limestone mapped around Serenada.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 195 | Highway nearby | 0.9 miles outside | State highway office |
| Pecan Branch | Stream | 1.73 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Berry Creek | Stream | 1.29 channel miles inside | Checked for Corps of Engineers jurisdiction |
| North Fork San Gabriel River | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Georgetown | Lake or pond | 1,164 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Serenada or within 1 mile outside the community, so no local track crossing appears in the map data. Pecan Branch runs 1.73 channel miles inside the community, and Berry Creek runs 1.29; mapped streets cross named streams at 9 locations. A crossing plan for Pecan Branch needs to account for the channel and check for U.S. Army Corps of Engineers jurisdiction. Lake Georgetown is outside the boundary but lies within 1 mile.
Whose permission does a Serenada bore in Williamson County need?
Serenada has no city government, so its streets fall to Williamson County, while Texas State Highway 195 is handled by the state because it is a state highway. The TxDOT Austin District reviews highway utility permits. The utility that owns the line submits its application through TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. For a crossing beneath Texas State Highway 195 near Serenada, we follow TxDOT’s requirement to bore or tunnel beneath existing highway pavement. Work on Pecan Branch also needs a check for U.S. Army Corps of Engineers jurisdiction. The mapped rail data shows no local track crossing.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Serenada and Williamson County?
Before planning a bore near Logan Ranch Road, we confirm the Serenada address’s water provider with Williamson County or the local water district. Public drinking water records do not tie a system to this unincorporated place, so an address level check matters. Utilities reporting electric service in Williamson County include Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the specific route before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Williamson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Serenada’s median housing year at 1981; 97 percent of units date from 1960 to 1999, and 3 percent from 2000 or later. A replacement route along Sequoia Trail may meet older buried services, while a newer connection has its own route to check. Before the drill approaches, we hydrovac pothole every marked utility on the planned path because surface paint shows position, not depth.

Where is Serenada in relation to Weir and Georgetown?
Serenada is in Williamson County, at an elevation of 767 feet, and covers 2.15 square miles. Serenada uses ZIP codes 78628 and 78633, which we check when coordinating underground work near Georgetown. Georgetown, the county seat and nearest larger city, is 3.1 miles south; Weir is 6.6 miles east. Jarrell is 8.2 miles northeast, Sonterra is 8.7 miles northeast, and Santa Rita Ranch is 8.8 miles southwest. The Yukon, Oklahoma main office is 369 road miles away, a 7.2 hour drive, which affects mobilization for a Serenada job.
Places near Serenada
- Directional boring in Georgetown: 3.1 miles south
- Directional boring in Weir: 6.6 miles east
- Directional boring in Jarrell: 8.2 miles northeast
- Directional boring in Sonterra: 8.7 miles northeast
- Directional boring in Santa Rita Ranch: 8.8 miles southwest
Which jobs call for a bore along Logan Ranch Road in Serenada?
- Highway crossing: A route under Texas State Highway 195 needs a TxDOT utility permit handled by the line owner.
- Water service: A new service along Esparada Drive needs its address specific water provider confirmed before the bore is planned.
- Fiber drop: A fiber route along Sequoia Trail can pass beneath pavement without opening the street surface.
- Creek crossing: A line beneath Pecan Branch needs a path planned around the channel and a jurisdiction check.
- Electric conduit: A conduit route near Logan Ranch Road starts with confirming which Williamson County utility owns the line.
- Replacement bore: A route near Serenada Drive may need potholing to locate existing services before the drill approaches.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Serenada Drive bore quote?
For a Serenada Drive quote, show us where the work is with an address or map pin, then what goes underground, such as water or fiber. For a bore along Sequoia Trail, we ask customers to include the pipe or conduit size and total footage. A sketch or plans help us see how the route relates to Pecan Branch, Texas State Highway 195 or nearby utilities.
Eckrant soil and shallow limestone matter first because they can change tooling, steering and reaming time. The route’s length and pipe size also shape the work. Crossings or exposed utilities along Pecan Branch and Logan Ranch Road add planning and potholing. Pavement, access pits, excavator time and backfill affect the scope too. Serenada’s 369 road miles from Yukon can affect mobilization, while emergency or high profile work can require a different plan. We set the price from the details of the specific bore, not from footage alone.
Questions people ask about boring in Serenada
Does Trinity Boring Solutions take jobs in Serenada and Williamson County, and who staffs them?
Yes, we take directional boring work in Serenada and across Texas. Our crews do the work, with support from partner drilling contractors Trinity has vetted when needed. You work with Trinity through the job and bore log, whether the route is by Pecan Branch or along Logan Ranch Road.
Who approves a bore under Texas State Highway 195 near Serenada?
The utility owner applies for the right of way permit through TxDOT’s online RULIS system, and the TxDOT Austin District reviews it. Texas State Highway 195 lies 0.9 miles outside Serenada’s mapped community boundary. We prepare the bore plan and profile for the owner’s application.
Can a line be bored beneath Pecan Branch in Serenada?
Yes, a bore can be planned beneath Pecan Branch, which runs 1.73 channel miles in Serenada. The route needs to account for the channel and be checked for U.S. Army Corps of Engineers jurisdiction during planning. Potholing marked utilities along the approach helps confirm their depth.
Which electric company owns the lines at a Serenada address in Williamson County?
The owner depends on the address, so we confirm it before planning an electric conduit bore. Utilities reporting service in Williamson County include Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Ask the confirmed line owner about conduit specifications.
Does Williamson County control Serenada streets like Esparada Drive, and must we cut one?
Serenada is unincorporated and has no city government, so its local streets fall to Williamson County. A directional bore along Esparada Drive can pass beneath the street without opening the pavement. The exact route still needs planning around marked utilities and access for the pits.
Do older homes near Sequoia Trail mean more replacement bores in Serenada?
Serenada’s median housing year is 1981, and the American Community Survey estimates 97 percent of units were built from 1960 to 1999. That age can make a replacement route near Sequoia Trail different from a new service connection. Near Berry Creek, we expose marked utilities before drilling so the bore can be planned around the marked lines.
Does Trinity cover Georgetown and rural sites outside Serenada?
Yes, we take work in Georgetown and at rural sites beyond Serenada’s mapped community boundary. Georgetown is 3.1 miles south and is the Williamson County seat. A route toward Georgetown soil or nearby acreage still needs its own address, ground review and utility checks.
How far ahead should I call Texas811 for a bore near Logan Ranch Road in Serenada?
Count back at least two working days from the planned start near Logan Ranch Road, excluding Saturdays, Sundays and legal holidays. Texas811 accepts notice no earlier than 14 days before work, and the ticket has a 20 day life. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks need refreshing before work continues.
What affects the price of a Serenada bore near Texas State Highway 195?
The price depends on the job details, not just the footage. Eckrant soil and shallow limestone can affect tooling and time; pipe size, route length and utility crossings also matter. Highway right of way work adds permitting needs, and Serenada’s 369 road miles from Yukon can affect mobilization.
Where the Serenada facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Serenada
- U.S. Census Bureau, TIGER/Line 2024: Serenada boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Serenada population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Serenada housing units and year built
- Macrostrat geologic map compilation: map units under Serenada
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Williamson County
- U.S. Geological Survey, Elevation Point Query Service: Serenada elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Serenada
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Serenada
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Serenada, Texas
Type the address of your job in Serenada. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Serenada
Same county: Round Rock · Leander · Cedar Park · Austin · Hutto · Brushy Creek · Taylor · Liberty Hill · Florence · Granger · Bartlett · Thrall. All counties: Texas county list.
