trinityboringsolutions.com

Edom Texas Directional Boring: Cuthbert Soil, FM 279 and Murchison Creek

Quick Answer: Edom has Cuthbert fine sandy loam, and Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for proposed lines crossing FM 279. FM 314 is near the 299 road miles from our Yukon, Oklahoma main office. At about 40 inches, Edom soil is often sandy clay loam or clay loam, which can cling to a reamer and grip pipe. Along Murchison Creek, we plan below the channel and check whether the crossing falls under Corps jurisdiction.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Edom bores at a glance

  • Incorporated city in Van Zandt County, Texas. Population 367 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 299 miles, about 5.9 hours of driving.
  • Ground: Cuthbert soil is mapped on 25 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: FM 279, FM 314 and FM 2339. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Murchison Creek and Cow Creek.
  • Public water: Edom Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Edom near FM 279?

Our crews handle directional boring in Edom, Van Zandt County, where Cuthbert fine sandy loam gives way to clay that can load a reamer. The Census Bureau Vintage 2024 estimate puts Edom at 367 residents; in Van Zandt County, we plan underground work around local conditions. We install water, sewer, gas, electric conduit and fiber, with routes that could serve properties along Brig Street or connect across FM 279, depending on the project plan.

Our main office is in Yukon, Oklahoma, and Edom work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan staged reaming and timely pipe pulls where Edom clay can swell around a line.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Edom and Cuthbert soil?

USDA maps Cuthbert fine sandy loam, on 8 to 20 percent slopes, across 25% of Edom. Fine sandy loam is the leading surface texture at 57%, with loamy fine sand at 19% and loam at 15%. About 40 inches down, sandy clay loam accounts for 36% of mapped texture and clay loam for 25%; clay accounts for 18%. Average clay content at that depth is 28%. Clayey material can cling to a reamer, so these mapped patterns help shape the drilling plan but are not site borings.

USDA soil survey, inside the Edom city limitsWhat is mapped
Soil series mappedCuthbert 25 percent, Wolfpen 18 percent, Kirvin 15 percent, Manco 15 percent and Oakwood 14 percent
Texture at the surfacefine sandy loam 57 percent, loamy fine sand 19 percent and loam 15 percent
Texture about 40 inches downsandy clay loam 36 percent, clay loam 25 percent and clay 18 percent
Engineering class about 40 inches downlean clay (CL) 56 percent, clayey sand (SC) 22 percent and fat clay (CH) 16 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches33 percent of the area
Flood prone soils15 percent of the area
High corrosion risk for uncoated steel47 percent of the area

The USDA soil survey maps bedrock within 60 inches in 3% of Edom, and none within 40 inches; the typical mapped depth is 49 inches. Queen City Sand, a Lutetian unit of siltstone, sandstone and claystone, describes the local geology, so weathered rock may slow a bore. Seasonal water tables occur within 60 inches across 33%, while flood prone soils cover 15%; wet pits and creek approaches need planning. High steel corrosion risk is mapped across 47%, so the line owner should consider casing and tracer wire materials. HDPE does not share the uncoated steel concern.

How do we drill Edom’s sandy clay loam near FM 279?

For Edom’s sandy clay loam and clay loam, we tune the fluid and reaming sequence to keep the hole stable without forcing pressure toward pavement on FM 279 or Brig Street.

  1. In Cuthbert fine sandy loam and clayey subsoil, we use thinner drilling fluid with polymer and ream in stages to limit sticky buildup on the tool.
  2. Where Edom’s sandy soil is mapped, we build a supporting fluid wall and stage the reaming, with pipe ready before the final pass.
  3. With seasonal water table soils mapped across 33% of Edom, we keep pits small and pump water as needed, especially near Murchison Creek.
  4. At marked utilities along Brig Street or FM 279, we hydrovac pothole before the drill approaches; a locator tracks the head and records depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where does a line have to go under Brig Street in Edom?

A bore in Edom can pass beneath FM 279, FM 314, FM 2339 or streets such as Brig Street without cutting the route surface. The mapped roadway lengths inside city limits are 2.9 miles for FM 279, 2.6 miles for FM 314 and 0.9 miles for FM 2339. Brig Street runs 1.62 miles in the city; County Road 4713 runs 0.75 miles and County Road 4807 runs 0.49 miles. Each alignment still needs a site plan for access, pavement and existing lines.

CrossingTypeMapped extentWho has a say
FM 279State highway2.9 roadway miles insideState highway office
FM 314State highway2.6 roadway miles insideState highway office
FM 2339State highway0.9 roadway miles insideState highway office
Texas State Highway 64Highway nearby0.8 miles outsideState highway office
Murchison CreekStream1.08 channel miles insideChecked for Corps of Engineers jurisdiction
Cow CreekStream0.23 channel miles insideChecked for Corps of Engineers jurisdiction
Holloman BranchStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Edom or within one mile outside its limits, and no street and rail crossing is mapped in the city. Murchison Creek runs 1.08 channel miles through Edom, while Cow Creek runs 0.23 miles; three mapped street crossings pass over named streams. A creek bore needs a route planned beneath the channel, and the crossing is checked for federal water jurisdiction. Along County Road 4713, no lakes or ponds are mapped within one mile, so we check the bore route against mapped water features.

Who permits a bore in Edom and Van Zandt County?

Edom’s city streets are under city control, while work in the right of way of FM 279, FM 314 and FM 2339 needs a TxDOT utility permit. The line owner, not the driller, files through TxDOT’s online RULIS system, and the TxDOT Tyler District reviews it; we prepare the bore plan and profile for the owner’s application and work under its permit. At highway crossings, electric, communication and water lines need 60 inches of cover, and pressurized sewer lines need 60 inches. The permit may set another depth. A Murchison Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Edom near Edom Water Supply Corporation?

Edom Water Supply Corporation operates a groundwater well system with 504 service connections serving 1,512 people. For electric service in Van Zandt County, utilities reporting to EIA include Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative. We confirm the line owner for an Edom address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Edom Water Supply CorporationPublic water systemGroundwater wells504 connections, 1,512 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Van Zandt CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Edom’s median housing year at 1979; 14% of homes were built before 1960, 63% from 1960 to 1999 and 23% in 2000 or later. That mix can mean a job is replacing an older service or bringing a new one to a newer property along Brig Street. At Cow Creek, we hydrovac pothole every marked utility on the bore path before drilling nearby; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Edom and Brownsboro for our service area?

Edom is in Van Zandt County, at elevation 484 feet, and covers 2.51 square miles. Edom’s ZIP codes are 75754 and 75756, and we account for its Van Zandt County location when planning underground routes. Brownsboro is 5.2 miles south; Callender Lake is 5.3 miles west, and Ben Wheeler is 7.4 miles northwest. Lindale is 14.4 miles northeast, while county seat Canton is 19.4 miles northwest. Our Yukon yard is 299 road miles away, a 5.9 hour drive, which is part of planning work near FM 279 and the other Edom roads.

Places near Edom

What kinds of bores come up near County Road 4713 in Edom?

  • Highway crossing: A proposed line beneath FM 279 is bored under the roadway, with the route and cover planned for the TxDOT right of way.
  • Street crossing: A route beneath Brig Street can keep pavement intact, with pits placed in dirt on either side of the crossing.
  • Creek crossing: A bore beneath Murchison Creek is planned below the channel, with federal jurisdiction checked during planning.
  • Water service: A proposed connection near Edom Water Supply Corporation can be routed beneath County Road 4713 rather than through an open cut.
  • Fiber conduit: A conduit route along FM 314 can use directional boring to avoid cutting the paved travel surface.
  • Utility crossing: Near County Road 4807, marked lines on the proposed bore path are exposed by hydrovac before drilling gets close.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near County Road 4802 in Edom?

For a quote near County Road 4802 in Edom, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. The route matters: a short run beside Brig Street may present different access and crossing needs than a route approaching Murchison Creek.

Mobilization starts with the 299 road miles from Yukon, then the Cuthbert and clayey soil conditions shape equipment time and reaming. We also account for pipe or conduit size, bore length, and how many utilities must be exposed. A crossing beneath FM 279, concrete or pavement, creek or drainage work near Murchison Creek, pits, excavator time and sand backfill all affect the scope. High profile or emergency work can add demands too.

Questions people ask about boring in Edom

Does Trinity Boring Solutions take jobs in Edom, Van Zandt County, and how are crews assigned?

Yes. We take directional boring work in Edom, and our own crews or vetted partner contractor crews handle the site work. The main office remains in Yukon, Oklahoma, while Trinity stays your contact from the first call through the bore log, including a project near FM 279.

Who approves a bore under FM 279 in Edom?

TxDOT handles the highway utility permit for a bore in the FM 279 right of way, with the TxDOT Tyler District reviewing it. The utility line owner files in RULIS, not the drilling contractor. We prepare the bore plan and profile for the owner’s submission and work under the issued permit.

Can a utility line be bored under Murchison Creek in Edom?

A line can be planned beneath Murchison Creek, whose mapped channel runs 1.08 miles through Edom. The route must stay below the channel, and planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction. The exact path and ground conditions determine the bore plan.

Who runs Edom’s public water system, and where does its water come from near FM 314?

Edom Water Supply Corporation runs the public system, which draws from groundwater wells. Public records list 504 service connections serving 1,512 people. For a proposed service near Brig Street, confirm the property’s connection and route with the water system before planning the bore.

Which electric companies report service in Edom, Van Zandt County, and who confirms conduit specs?

Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative report service in Van Zandt County. The specific line owner and conduit requirements need confirmation for the Edom address before a bore is planned near FM 314.

Who is responsible for Edom streets, and does County Road 4807 need to be cut?

Edom is incorporated, so its city streets are under city control. A directional bore can pass beneath a street without cutting its pavement; the authority for a specific route named County Road 4807 should be confirmed before planning. We expose marked utilities along the bore path before drilling near them.

What bore sizes and lengths can Trinity handle near County Road 4802 in Edom?

On FM 2339, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near County Road 4802, the size, footage, Cuthbert soil conditions and crossings help determine the equipment and bore plan.

How much notice does Texas811 need for a bore near Brig Street in Edom?

For a bore near Brig Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. The ticket has a 20 day life; if the start slips more than 14 days past the original notice, make a new request. On County Road 4807, we refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring under FM 279 in Edom?

The price depends on the specific job near FM 279, including bore length and line size, the Cuthbert and clayey ground, and utilities that must be exposed. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. Mobilization reflects the 299 road miles from Yukon; high profile or emergency work can change the scope.

Where the Edom facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Edom

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Edom, Texas

Type the address of your job in Edom. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Edom

Same county: Canton · Wills Point · Grand Saline · Edgewood · Myrtle Springs · Fruitvale. All counties: Texas county list.