trinityboringsolutions.com

Brownsboro Texas Directional Boring: Nahatche Loam, Highway 31, Union Pacific Track

Quick Answer: From our Yukon office, Brownsboro is 307 road miles away, and we take directional boring, also called horizontal directional drilling (HDD), work for routes crossing Texas State Highway 31. We staff Brownsboro work with our own crews and vetted partner contractors. Nahatche loam is mapped across 23 percent of the city, so a bore plan has to account for frequently flooded ground. Union Pacific tracks and local streets are also part of route planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Brownsboro bores at a glance

  • Incorporated city in Henderson County, Texas. Population 1,309 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 307 miles, about 6.1 hours of driving.
  • Ground: Nahatche soil is mapped on 23 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: Texas State Highway 31, FM 314, FM 3204 and FM 607. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Public water: City of Brownsboro, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring along Stuart Street in Brownsboro?

Brownsboro is 307 road miles from our Yukon yard, and we staff work with our crews and vetted partner contractors, including routes along Stuart Street. The Census Bureau Vintage 2024 estimate puts the city population at 1,309 in Henderson County. We install water, sewer, gas, electric conduit and fiber, including service runs along Stuart Street or the Texas State Highway 31 corridor.

Our main office is in Yukon, Oklahoma, and Brownsboro work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. A typical Brownsboro job, such as a service line near Stuart Street, is much shorter and sized to its route and ground.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore encounter in Brownsboro near Nahatche soil?

The USDA soil survey maps Nahatche soil across 23 percent of Brownsboro, including Nahatche loam with 0 to 1 percent slopes that is frequently flooded. Pickton and Cuthbert soils also cover notable parts of the city. About 40 inches below the surface, clay loam is mapped under 39 percent of the area and sandy clay loam under 38 percent. Loamy fine sand accounts for 19 percent at that depth. These are mapped patterns, not test borings, so the route still needs site specific planning.

USDA soil survey, inside the Brownsboro city limitsWhat is mapped
Soil series mappedNahatche 23 percent, Cuthbert 22 percent, Pickton 19 percent, Wolfpen 15 percent and Gallime 9 percent
Texture at the surfacefine sandy loam 35 percent, loamy fine sand 34 percent and loam 23 percent
Texture about 40 inches downclay loam 39 percent, sandy clay loam 38 percent and loamy fine sand 19 percent
Engineering class about 40 inches downlean clay (CL) 54 percent, clayey sand (SC) 22 percent and silty sand (SM) 16 percent
Average clay content about 40 inches down24 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches54 percent of the area
Flood prone soils23 percent of the area
High corrosion risk for uncoated steel37 percent of the area

The survey maps bedrock within 60 inches in 6 percent of Brownsboro, all weathered, with a typical depth of 24 inches where mapped; hard bedrock is not mapped within that depth. Seasonal water tables occur within 60 inches across 54 percent, and flood prone soils cover 23 percent, so pits may need pumping and creek routes need depth planning. Across Brownsboro, we account for the mapped high steel corrosion risk covering 37 percent when planning underground boring. The Queen City Sand unit, of Lutetian age, includes sand, siltstone and claystone, so local conditions can change along a bore.

How do we drill Brownsboro clay loam and sandy ground?

Brownsboro has clay loam and sandy clay loam mapped at about 40 inches, with loamy fine sand also present. We adjust fluid, reaming and pit setup to the route rather than assume one soil throughout.

  1. Where Brownsboro’s clay loam is present, we manage fluid and ream in stages so sticky soil does not build up on the reamer or grip the pipe.
  2. For the loamy fine sand mapped at about 40 inches, we use drilling fluid to support the hole and stage the reaming before pulling in the line.
  3. Seasonal water tables are mapped within 60 inches across 54 percent of the city, so we plan compact pits and pumping where a Stuart Street route is wet.
  4. At a route near Kickapoo Creek, we plan bore depth beneath the channel and check whether the crossing falls under federal jurisdiction.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What can a Brownsboro bore cross near Union Pacific tracks?

Texas State Highway 31 runs 4.2 mapped roadway miles inside Brownsboro, with FM 314, FM 3204 and FM 607 also within city limits. Stuart Street is the longest named street at 1.29 miles, followed by Ingram Street at 0.92 miles and Saylors Street at 0.82 miles. A route under one of these roads needs a profile that fits the crossing and nearby utilities. The city has 19.6 public road centerline miles, so access and the chosen alignment matter.

CrossingTypeMapped extentWho has a say
Texas State Highway 31State highway4.2 roadway miles insideState highway office
FM 314State highway1.4 roadway miles insideState highway office
FM 3204State highway1 roadway miles insideState highway office
FM 607State highway0.6 roadway miles insideState highway office
Union PacificRailroad1.99 track miles insideThe railroad
Kickapoo CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Murchison CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Cow CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Sawmill CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.99 track miles inside Brownsboro, and 3 mapped street and rail crossings make track coordination relevant to some routes. A crossing needs an agreement from the railroad that owns the track, with its terms setting details such as casing, depth and flagging. No named stream runs inside city limits, and none is mapped crossing a street there. Kickapoo Creek is 0.1 miles from the limits, while unnamed drainage totals 2.24 miles inside the city.

Who approves work under Texas State Highway 31 in Brownsboro?

At Texas State Highway 31 crossings, we plan electric or communication lines 60 inches below the lowest crossed grade, with 60 inches for water and pressurized sewer. The TxDOT Tyler District reviews right of way utility permits. The line owner files through TxDOT RULIS, and we prepare the bore plan and profile for that application. Highway pavement is bored or tunneled, with crossings encased and rural highway bores extending beneath all travel lanes. Brownsboro city streets belong to the city. A Union Pacific track crossing also needs an agreement with the railroad, and a Kickapoo Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Brownsboro water system?

The City of Brownsboro public water system uses groundwater wells and reports 475 service connections serving 1,212 people. For an electric conduit bore, we confirm the line owner for the specific address; Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report electric service in Henderson County. That countywide information does not identify the provider at every Brownsboro address, so the owner needs confirmation before a route is planned.

Line ownerWhat it isSourceSize
City of BrownsboroPublic water systemGroundwater wells475 connections, 1,212 people served
Oncor Electric Delivery Company and Trinity Valley Electric CooperativeElectric utilities reporting service in Henderson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Brownsboro’s median housing year at 1989: 16 percent of homes were built before 1960, 43 percent from 1960 to 1999 and 41 percent in 2000 or later. That mix can mean either replacement work or new service near Browning Street. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth. For example, a line planned beneath Browning Street gets exposed before the drill approaches.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Brownsboro in relation to Athens and nearby towns?

Brownsboro is in Henderson County at an elevation of 399 feet and covers 2.37 square miles. For underground work, we use ZIP code 75756 to identify the Brownsboro service area. Edom is 5.2 miles north, Callender Lake is 6.7 miles northwest, Moore Station is 7.9 miles south, Chandler is 8.2 miles east and Murchison is 8.5 miles west. Athens, the county seat and nearest larger city, is 14.3 miles southwest. From our Yukon yard, the drive to Brownsboro is 307 road miles and 6.1 hours, which affects mobilization for routes on FM 314 or elsewhere in town.

Places near Brownsboro

What kinds of bores come up near Kickapoo Creek in Brownsboro?

  • Highway crossing: A line under Texas State Highway 31 needs a bore profile and right of way planning for its pavement and travel lanes.
  • Water service: A connection near the City of Brownsboro system can use a route along Stuart Street, with the existing line exposed before drilling nearby.
  • Fiber conduit: A fiber run along Ingram Street can stay underground across driveways instead of opening the surface along the route.
  • Creek crossing: A route near Kickapoo Creek needs channel depth planning and a jurisdiction check before the bore path is set.
  • Rail crossing: A line beneath the Union Pacific track needs the railroad’s crossing agreement and a plan for its specified casing and flagging.
  • Drainage bore: An alignment near Brownsboro’s mapped unnamed drainage can be planned to avoid cutting the surface along the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Brownsboro bore near Browning Street?

For a quote near Browning Street, start with the address or a map pin. Tell us what goes in the ground, such as water or fiber, then give the pipe or conduit size and footage. A sketch showing the route toward Texas State Highway 31 or a nearby street crossing helps us understand the alignment and access.

The 307 road miles from Yukon are part of mobilization, then the Brownsboro ground and route shape the work. Length and pipe size matter, as do the clay loam and sandy clay loam mapped below the surface. A Texas State Highway 31 or Union Pacific crossing can add coordination and exposure work. Creek or drainage crossings, pavement, pits, excavator time, sand backfill and emergency timing also affect the scope.

Questions people ask about boring in Brownsboro

Does Trinity take Brownsboro directional boring jobs in Henderson County, and who staffs them?

Yes. Trinity takes directional boring work in Brownsboro, Henderson County, and staffing follows the job rather than a local office: our team coordinates with our crews and partner contractors vetted by Trinity. For a route along Stuart Street, you work with Trinity through planning and the bore log, whichever crew is on site.

Could groundwater or flooding near Kickapoo Creek affect Brownsboro bore pits?

It can. The USDA soil survey maps seasonal water tables within 60 inches across 54 percent of Brownsboro and flood prone soils across 23 percent. Near Kickapoo Creek, we plan pit placement and pumping for wet ground and set the bore depth to pass below the channel when a creek crossing is part of the route.

Does Nahatche soil in Brownsboro create a steel corrosion concern, and what pipe can we use?

The survey maps high steel corrosion risk across 37 percent of Brownsboro, so the line owner should consider casing and tracer wire materials. HDPE is not affected by that soil condition. Nahatche loam is one mapped soil type, but the appropriate pipe and any steel coating depend on the line owner’s design.

What soil might a Brownsboro bore pass through around Nahatche loam?

The USDA soil survey maps Nahatche soil across 23 percent of Brownsboro. At about 40 inches below the surface, clay loam covers 39 percent of the mapped area and sandy clay loam covers 38 percent; loamy fine sand accounts for 19 percent. Those mapped patterns help set a starting approach, but they are not test borings.

Is rock likely on a Brownsboro bore route, and how much bedrock is mapped?

The USDA soil survey maps bedrock within five feet in 6 percent of Brownsboro, and the mapped bedrock is weathered. In Brownsboro, we plan underground boring with the fact that hard bedrock is not mapped within that depth in mind. The Queen City Sand unit includes siltstone, sandstone and claystone, so a specific route still needs to account for conditions that may differ from the broader map.

Who approves a bore beneath Texas State Highway 31 in Brownsboro?

The utility owner applies for the right of way permit through TxDOT RULIS, and the TxDOT Tyler District reviews it. We supply the bore plan and profile for the owner’s application. For Texas State Highway 31, the required cover depends on the line type and crossing; the district can set a different depth in the permit.

How early should we call Texas811 for a Brownsboro bore along Stuart Street?

Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. For a bore along Stuart Street, describe the planned path clearly. If the start slips more than 14 days past the original notice, request another ticket; worn or moved marks need refreshing before work continues.

Does Brownsboro’s distance from Athens change the job from Trinity’s Yukon office?

Athens is 14.3 miles southwest of Brownsboro, while the trip from our Yukon yard is 307 road miles and 6.1 hours. That distance affects mobilization and scheduling for work on FM 314 or elsewhere in town. The scope still depends on the route, ground and crossings, not distance alone.

What affects the cost of a directional bore under Texas State Highway 31 in Brownsboro?

The price depends on the route and its requirements, including length, pipe size, soil, exposed utilities, pavement and crossing coordination. Texas State Highway 31 may require highway permit planning, while the Union Pacific track brings its own crossing agreement. Brownsboro’s mapped clay loam, drainage crossings, pits and mobilization from Yukon can also affect the work.

Where the Brownsboro facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Brownsboro

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Brownsboro, Texas

Type the address of your job in Brownsboro. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Brownsboro

Same county: Gun Barrel City · Tool · Malakoff · Mabank · Seven Points · Eustace · Berryville · Log Cabin · Trinidad · Payne Springs · Star Harbor · Enchanted Oaks. All counties: Texas county list.