trinityboringsolutions.com

Callender Lake Texas Directional Boring: Pickton Fine Sand, FM 2339 and Slater Creek

Quick Answer: Callender Lake is an unincorporated community, and we take directional boring, also called horizontal directional drilling (HDD), for crossings beneath FM 2339. County and state agencies, not a city government, control its public roads, including County Road 4709. Callender Lake sits 299 road miles from our Yukon, Oklahoma main office, with Callender Lake Drive among the routes a job may cross. The USDA soil survey maps Pickton fine sand across much of the area; loose sand can cave behind the drill, so staged reaming and ready pipe matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Callender Lake bores at a glance

  • Unincorporated community in Van Zandt County, Texas. Population 1,090 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 299 miles, about 6 hours of driving.
  • Ground: Pickton soil is mapped on 59 percent of the area, with fine sand about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: FM 2339 and FM 773. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Slater Creek and Prairie Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Callender Lake and FM 2339?

Callender Lake is an unincorporated community in Van Zandt County, and we take directional boring work along FM 2339 and local roads. County or state agencies, not a city government, control those public streets. The Census Bureau counted 1,090 residents in 2020; it does not publish yearly population estimates for unincorporated places. We can install water, sewer, gas, electric conduit and fiber beneath routes such as County Road 4709.

Our main office is in Yukon, Oklahoma, and Callender Lake work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, with directional boring work dating to 1982. For a service run near Callender Lake Drive, our equipment range covers 3/4 inch lines through 48 inch casing and bores from 10 feet to 5,000 feet.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Pickton soil affect drilling in Callender Lake?

The USDA soil survey maps Pickton soil across 59% of Callender Lake, with Pickton fine sand map units covering 35% and 23% on different slopes. At about 40 inches below the surface, fine sand is mapped across 59% of the area, while average clay content is 15%. These are mapped soil patterns, not test borings for a specific lot. Fine sand cuts readily but may cave behind the drill head, so staged reaming and having the pipe ready before the final pass help keep the hole open.

USDA soil survey, inside the Callender Lake mapped community boundaryWhat is mapped
Soil series mappedPickton 59 percent, Wolfpen 11 percent, Manco 7 percent, Cuthbert 7 percent and Freestone 3 percent
Texture at the surfacefine sand 59 percent, loamy fine sand 14 percent and loam 8 percent
Texture about 40 inches downfine sand 59 percent, sandy clay loam 17 percent and loam 7 percent
Engineering class about 40 inches downsilty sand (SM) 59 percent, lean clay (CL) 15 percent and clayey sand (SC) 14 percent
Average clay content about 40 inches down15 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches13 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel13 percent of the area

For Callender Lake, bedrock is not mapped in the top five feet, though the geologic map shows Queen City Sand of Eocene age and does not rule out deeper rock. The soil survey maps a seasonal water table within 60 inches across 13% of the area, so pits may need pumping where the ground is wet. Flood prone soils cover 8%, and high steel corrosion risk is mapped across 13%; the line owner should consider casing and tracer wire materials.

What does it take to bore Callender Lake’s fine sand?

Callender Lake’s mapped fine sand can slough into an open bore, so we plan staged reaming and have the pipe ready before the final pass. The route near Slater Creek also affects pit placement and depth.

  1. Pickton fine sand can fall back behind the bit, so we ream in stages and have the pipe laid out before the last pass.
  2. Near Slater Creek, we plan the bore depth and pit locations around the channel, then check whether the crossing falls under Corps jurisdiction.
  3. At County Road 4709, we expose each marked utility on the bore path with hydrovac before the drill approaches; surface paint does not show depth.
  4. For a route on FM 2339, we track the drill head from the surface and log depth and pitch as the bore advances.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

Where does a line have to go under County Road 4709 in Callender Lake?

FM 2339 and FM 773 run inside the mapped Callender Lake community boundary, with 1.5 roadway miles of FM 2339 and 1.1 of FM 773. County Road 4709 is the longest named street at 3.39 miles; Callender Lake Drive runs 1.66 miles, and Hickory Hills Drive runs 1.64 miles. Those routes can put a bore beneath public road surfaces or driveways. Where a route uses state highway right of way, the crossing plan must follow TxDOT requirements rather than treating it like an ordinary county road.

CrossingTypeMapped extentWho has a say
FM 2339State highway1.5 roadway miles insideState highway office
FM 773State highway1.1 roadway miles insideState highway office
Slater CreekStream0.91 channel miles insideChecked for Corps of Engineers jurisdiction
Prairie CreekStream0.59 channel miles insideChecked for Corps of Engineers jurisdiction
Price BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Killingsworth BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Callender LakeLake or pond267 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Railroads are not mapped inside the Callender Lake community or within 1 mile outside it, so the mapped routes show no track crossing. Slater Creek runs 0.91 channel miles inside the community, and Prairie Creek runs 0.59; mapped streets cross named streams at two locations. Callender Lake itself covers 267 acres. A route near either creek or the lake needs a site specific crossing plan, with water crossing jurisdiction checked during planning.

Who permits a bore in Callender Lake and Van Zandt County?

Callender Lake has no city government, so a bore on a county road such as County Road 4709 goes through the county, while state highway right of way is handled by TxDOT. For FM 2339 or FM 773, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Tyler District reviews it; we prepare the bore plan and profile and work under the owner’s permit. TxDOT cover rules set depths of 60 inches at crossings for electric and communication lines and 60 inches for water lines. A Slater Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Callender Lake in Van Zandt County?

EPA drinking water records do not identify the water provider for a specific Callender Lake address. The provider has to be confirmed with the county or local water district before a bore is planned. Utilities reporting electric service in Van Zandt County include Oncor Electric Delivery Company, Southwestern Electric Power, Texas New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative. We confirm the line owner for an electric conduit route near Callender Lake Drive before planning the bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Van Zandt CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Callender Lake’s median housing year at 1995; 63% of units date from 1960 to 1999, and 37% from 2000 or later. That mix can mean either a replacement line or a new service near Callender Lake Drive. Before drilling near marked utilities, we hydrovac pothole each one on the planned path; paint shows its position, not its depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Callender Lake and nearby Ben Wheeler?

Callender Lake is in Van Zandt County, at an elevation of 454 feet across 4.13 square miles, and its ZIP code is 75778. Edom is 5.3 miles east, Ben Wheeler is 5.8 miles north, Brownsboro is 6.7 miles southeast, and Murchison is 6.9 miles southwest. Athens, the nearest larger city, is 13.5 miles southwest; Canton, the county seat, is 16.3 miles northwest. Our Yukon, Oklahoma yard is 299 road miles away, about a 6.0 hour drive, which affects mobilization for a Callender Lake job.

Places near Callender Lake

What kinds of bores come up near Slater Creek in Callender Lake?

  • Highway crossing: A route beneath FM 2339 needs a bore plan that accounts for the state highway right of way and its pavement.
  • Water service: A new line near Callender Lake Drive can run beneath a driveway without cutting the surface, once the address’s water provider is confirmed.
  • Fiber conduit: A fiber route along County Road 4709 can pass beneath driveways and road surfaces while marked utilities are exposed first.
  • Creek crossing: A Slater Creek route needs depth and pit planning around the channel, with jurisdiction checked during planning.
  • Lake crossing: Work near the 267 acre Callender Lake needs a route plan that accounts for the water crossing and nearby access.
  • Electric conduit: Before a bore near Hickory Hills Drive, we confirm the line owner because several utilities report service in Van Zandt County.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Callender Lake near County Road 4714?

For a Callender Lake quote, start with the map pin or address so we can place the route against County Road 4714 or a nearby drainage. For work along County Road 4709, we need the pipe or conduit size and footage to plan the bore. A sketch or plan helps show the pits, pavement and marked utilities that may shape the bore.

A short, accessible run through Pickton fine sand may be simpler to plan than a route under FM 2339 or near Slater Creek. Price depends on footage, pipe size, soil and rock, utility exposures, pavement, creek or drainage crossings, pits and excavator time. The 299 road miles from Yukon to Callender Lake shape how we schedule mobilization for a boring project. High profile or emergency work can add planning demands, so the route and scope matter as much as the line being installed.

Questions people ask about boring in Callender Lake

Does Trinity take directional boring work in Callender Lake, Van Zandt County?

Yes, we take directional boring work in Callender Lake, with our own crews and vetted partner contractor yards supporting the work. You deal with Trinity from the first call through the bore log, including when a partner crew is on site near FM 2339.

How does housing age along Callender Lake Drive affect replacement bores in Callender Lake?

The American Community Survey estimates a 1995 median housing year in Callender Lake, with 63% of units built from 1960 to 1999. A replacement bore along Callender Lake Drive may need to work around existing buried services, while newer development may call for a new service route. Along FM 2339, we expose marked utilities before drilling near them to protect the planned crossing.

Can wet ground or flooding affect bore pits near Slater Creek in Callender Lake?

It can: the USDA soil survey maps a seasonal water table within 60 inches across 13% of Callender Lake and flood prone soils across 8%. Near Slater Creek, we plan pits for wet conditions and keep the bore route below the channel where needed.

What does Pickton soil look like along a bore route in Callender Lake?

The USDA soil survey maps Pickton soil across 59% of Callender Lake, with fine sand mapped at about 40 inches across 59% of the area. Sandy ground can cave behind the bit, so a bore near County Road 4709 may need staged reaming and pipe ready for pullback.

Could a bore near Slater Creek in Callender Lake encounter rock?

Near Prairie Creek, bedrock is not mapped in the top five feet, so we still plan for possible deeper rock. The geologic map identifies Queen City Sand of Eocene age. We use the route and site conditions to plan the bore rather than treating the map as a test of a particular lot.

Who approves a bore under FM 2339 in Callender Lake?

TxDOT handles work in FM 2339 right of way, and the TxDOT Tyler District reviews the utility owner’s application through RULIS. The utility owner files, while we prepare the bore plan and profile. The permit sets the approved crossing details and required cover.

Does the 299 road miles from Yukon affect a Callender Lake job near Athens?

Callender Lake is 299 road miles, or about a 6.0 hour drive, from our Yukon, Oklahoma main office. Athens is 13.5 miles southwest of Callender Lake. The distance from Yukon is part of mobilization planning, along with the route, equipment and ground conditions.

How early should I request utility marking for a Callender Lake bore by County Road 4709?

For a bore near County Road 4709, submit the Texas811 locate request at least 48 hours before excavation, counting working days and excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before work. If the start slips more than 14 days after the notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore in Callender Lake near FM 2339?

The job route and scope determine the price, including length, pipe size, Pickton fine sand, utility crossings, pavement, pits and drainage work. A route beneath FM 2339 has different permit and cover needs than a short service run. Mobilization from Yukon is another factor for Callender Lake.

Where the Callender Lake facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Callender Lake

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Callender Lake, Texas

Type the address of your job in Callender Lake. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Callender Lake

Same county: Canton · Wills Point · Grand Saline · Edgewood · Myrtle Springs · Fruitvale. All counties: Texas county list.