Myrtle Springs Texas Directional Boring: Freestone Soil, Rats Branch and Interstate 20
Quick Answer: Along Interstate 20, Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), for lines that need to pass beneath pavement without an open cut. From our Yukon, Oklahoma main office, Myrtle Springs is 273 road miles away, and work is staffed by our crews or vetted partner contractors near Corky Boyd Avenue. Freestone soil and clay loam at about 40 inches can cling to tooling, so we manage fluid and ream in stages. Rats Branch and Crooked Creek add water crossings to check before setting a route.
Myrtle Springs bores at a glance
- Unincorporated community in Van Zandt County, Texas. Population 954 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 273 miles, about 5.3 hours of driving.
- Ground: Freestone soil is mapped on 28 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: Interstate 20, Texas State Highway 64 and FM 1504. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Rats Branch and Crooked Creek.
- Public water: Myrtle Springs Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Interstate 20 in Myrtle Springs?
Trinity Boring Solutions takes directional boring work in Myrtle Springs, an unincorporated community in Van Zandt County where the 2020 Census counted 954 residents. The 273 road miles from our Yukon yard shape how we staff work along Interstate 20. Water, sewer, gas, electric conduit and fiber can follow or cross Corky Boyd Avenue and other mapped streets. We stay your contact through the bore log, whichever crew is on site.
Our main office is in Yukon, Oklahoma, and Myrtle Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A typical Myrtle Springs job beside Interstate 20 is much shorter, such as a service line or conduit crossing planned for the local ground and route.

How does Freestone soil affect a bore in Myrtle Springs?
The USDA soil survey maps Freestone soil across 28% of Myrtle Springs, with Wolfpen at 27% and Derly at 21%. Freestone is mapped as fine sandy loam with 1 to 3 percent slopes. At about 40 inches below the surface, the mapped texture is clay loam in 35% of the area, sandy clay loam in 29%, and clay in 28%. Average clay content at that depth is 37%, and heavy clay is mapped across 57% of the area. Freestone, Wolfpen, Derly, and Woodtell soils guide our planning, but mapped patterns are not test borings.
| USDA soil survey, inside the Myrtle Springs mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Freestone 28 percent, Wolfpen 27 percent, Derly 21 percent, Woodtell 9 percent and Pickton 9 percent |
| Texture at the surface | fine sandy loam 29 percent, loamy fine sand 27 percent and silt loam 21 percent |
| Texture about 40 inches down | clay loam 35 percent, sandy clay loam 29 percent and clay 28 percent |
| Engineering class about 40 inches down | fat clay (CH) 36 percent, clayey sand (SC) 29 percent and lean clay (CL) 26 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 55 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 63 percent of the area |
Bedrock is not mapped in the top five feet of Myrtle Springs, though the Wilcox Group, undivided, is mapped below; it is a Paleogene unit described as mostly mudstone with sand, lignite and other material. Seasonal water tables occur within 60 inches in 55% of the area, so pits may need pumping. Flood prone soils cover 5%, including places near Rats Branch. High steel corrosion risk is mapped across 63%, so the line owner should consider casing and tracer wire materials; HDPE is another option. Sticky clay calls for controlled fluid and staged reaming.
How do we drill Myrtle Springs clay loam?
For a Myrtle Springs route through clay loam, we adjust the drilling plan to the mapped ground and nearby features such as Rats Branch. We track the drill head from the surface and record its depth and pitch as it advances.
- Clay control: Myrtle Springs has heavy clay mapped across 57% of its area, so we watch fluid returns, ream in stages and plan to pull pipe the day the hole opens.
- Wet pits: Seasonal water tables occur within 60 inches across 55% of Myrtle Springs, so we keep pits small and plan to pump if water enters.
- Creek route: Where a Myrtle Springs bore approaches Rats Branch, we plan below the channel and check for U.S. Army Corps of Engineers jurisdiction.
- Utility exposure: Near the Myrtle Springs Water Supply Corporation lines or electric routes along Corky Boyd Avenue, we pothole marked lines before the drill approaches them.

Where might a Myrtle Springs bore pass under Rats Branch?
A Myrtle Springs bore can pass beneath Interstate 20, Texas State Highway 64 or FM 1504 without cutting the pavement, subject to the route and permits. Corky Boyd Avenue runs 2.69 miles inside the mapped community boundary; County Road 3204 runs 1.99 miles and County Road 2144 runs 1.43 miles. County Road 3439 is another named route. These roads help define possible alignments, but a map pin is needed to see which crossings affect a specific job.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 20 | Interstate | 3.7 roadway miles inside | State highway office |
| Texas State Highway 64 | State highway | 2.7 roadway miles inside | State highway office |
| FM 1504 | State highway | 1.6 roadway miles inside | State highway office |
| Rats Branch | Stream | 1.87 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Crooked Creek | Stream | 1.41 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Caney Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Flat Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Rock Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Sandy Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Myrtle Springs community boundary or within 1 mile outside it, so no local track crossing is identified in these records. Rats Branch runs 1.87 channel miles inside the boundary and Crooked Creek runs 1.41 miles; six mapped street crossings of named streams make water routes a real planning factor. Caney Creek is also close to the boundary. A creek crossing is planned below the channel as needed and checked for U.S. Army Corps of Engineers jurisdiction.
Who approves a Myrtle Springs bore in Van Zandt County?
Myrtle Springs has no city government, so county roads and state highways are handled by their respective authorities. Interstate 20, Texas State Highway 64 and FM 1504 are state routes, and TxDOT’s Tyler District reviews utility work in Van Zandt County. The utility owner, not the drilling contractor, applies through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT requires boring or tunneling beneath existing highway pavement, with the bore extending beneath all travel lanes on rural highways. Rats Branch crossings are checked for federal water jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near Myrtle Springs Water Supply Corporation?
Myrtle Springs Water Supply Corporation uses groundwater wells and reports 763 service connections serving 2,289 people. That gives a water line route near County Road 3439 or Corky Boyd Avenue a system to coordinate with before drilling. Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative report electric service in Van Zandt County. We confirm the electric line owner for the specific route before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Myrtle Springs Water Supply Corporation | Public water system | Groundwater wells | 763 connections, 2,289 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Van Zandt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Myrtle Springs’ median housing year at 1995; 32% of homes were built before 1960, 33% from 1960 to 1999 and 35% in 2000 or later. That mix can mean replacement work as well as new service near Corky Boyd Avenue. Before the drill approaches a marked line, we hydrovac pothole it to verify its depth. This matters around both the water system and electric lines, since surface marks show position, not depth.

Where is Myrtle Springs in relation to Mabank?
Myrtle Springs is in Van Zandt County, at elevation 515 feet, and covers 7.3 square miles within its mapped community boundary. ZIP code 75169 serves the area. Edgewood is 5.6 miles northeast, Canton is 6.4 miles southeast, and Wills Point is 7.1 miles northwest. Canton is the county seat, while Mabank, the nearest larger city, is 20.1 miles southwest. Our Yukon yard is 273 road miles away, a 5.3 hour drive, which factors into crew and equipment planning for a job near Interstate 20.
Places near Myrtle Springs
- Directional boring in Edgewood: 5.6 miles northeast
- Directional boring in Canton: 6.4 miles southeast
- Directional boring in Wills Point: 7.1 miles northwest
- Directional boring in Fruitvale: 8.8 miles northeast
- Directional boring in Grand Saline: 13.6 miles east
- Directional boring in Mabank: 20.1 miles southwest
What would we bore near Corky Boyd Avenue in Myrtle Springs?
- Highway crossing: An Interstate 20 bore keeps a utility route beneath the roadway pavement, with the alignment and permit planned for the travel lanes.
- Water service: A line near Corky Boyd Avenue can connect a property route with Myrtle Springs Water Supply Corporation’s groundwater well system.
- Fiber conduit: A conduit along County Road 3204 can be bored beneath pavement instead of opening a trench across the roadway.
- Creek crossing: A route under Rats Branch needs depth planning below the channel and a review for U.S. Army Corps of Engineers jurisdiction.
- State road crossing: A bore beneath FM 1504 needs TxDOT utility permit planning because it is a state route.
- Acreage service: A water or electric route near Dennis’s Flying Farm Airport can be planned around the mapped street and drainage features.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near County Road 3439 in Myrtle Springs?
A map pin or address near County Road 3439 lets us see the exact route and whether Rats Branch or a road crossing is involved. On Corky Boyd Avenue, we need the planned underground material, pipe or conduit size, and footage. A sketch or plans help us check access, crossings and the proposed bore path through Myrtle Springs.
Price follows the Myrtle Springs route, with ground and crossings shaping the work first. Clay loam and heavy clay can call for staged reaming and careful fluid control; a Rats Branch crossing adds depth and water planning. Pipe or conduit size and bore length matter, as do marked utilities to expose, pavement or concrete, pits, excavator time and sand backfill. A route beneath Interstate 20 may need state permit planning, and the 273 road miles from Yukon affect mobilization. High profile or emergency work along Interstate 20 changes the scope we plan.
Questions people ask about boring in Myrtle Springs
Does Trinity take directional boring jobs in Myrtle Springs and Van Zandt County?
Yes. Trinity takes directional boring work in Myrtle Springs and across Texas. The job can be staffed by our crews or by a partner contractor from a satellite yard that we have vetted. We remain your contact from the first call through the bore log, including for work near Interstate 20.
Could water in the ground near Rats Branch affect bore pits in Myrtle Springs?
It can. The USDA soil survey maps seasonal water tables within 60 inches across 55% of Myrtle Springs, and Rats Branch runs through the community. We plan pit size and access for wet conditions, and pumping may be needed. Creek crossings also get checked for U.S. Army Corps of Engineers jurisdiction during planning.
Does Freestone soil in Myrtle Springs create steel corrosion concerns, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 63% of Myrtle Springs, including areas with Freestone soil. The line owner should consider material choices for steel casing and tracer wire. HDPE is not affected by this soil corrosion concern, but the appropriate material depends on the line owner’s project requirements.
What ground would a bore pass through in Myrtle Springs near Freestone soil?
The USDA soil survey maps Freestone fine sandy loam across 28% of Myrtle Springs. At about 40 inches, clay loam is mapped across 35% of the area, with sandy clay loam across 29% and clay across 28%. Those mapped patterns help shape the drilling plan, but they are not test borings for a specific property.
Will a Myrtle Springs bore hit rock near the Wilcox Group?
Bedrock is not mapped in the top five feet of Myrtle Springs, so shallow rock is not indicated by the soil mapping. The geologic map shows the Wilcox Group, undivided, a Paleogene unit described mostly as mudstone, below. That map does not establish conditions at a particular bore depth, so the planned route still matters.
Who approves a bore under Interstate 20 in Myrtle Springs, and which TxDOT office reviews it?
TxDOT’s Tyler District reviews utility work on Interstate 20 in Van Zandt County. The utility owner submits the application in TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the owner’s permit. Existing highway pavement is bored or tunneled beneath rather than open trenched.
Does Trinity cover Edgewood and rural sites outside Myrtle Springs?
Yes. We take work in Myrtle Springs, nearby Edgewood and rural sites outside the mapped community boundary. Edgewood is 5.6 miles northeast, and the route, ground and crossings still determine the drilling plan. Share the location near Corky Boyd Avenue or another named road so we can understand the site and access.
How much notice does Texas811 need for a bore near Corky Boyd Avenue in Myrtle Springs?
For a planned bore near Corky Boyd Avenue, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For a County Road 3204 bore, if our start slips more than 14 days past the original notice, we submit a new request. Near Crooked Creek, we have worn or moved marks refreshed through Texas811 before underground work continues.
What affects the price of a directional bore near Interstate 20 in Myrtle Springs?
The route and ground drive the work: clay loam, heavy clay and a crossing under Interstate 20 can affect drilling steps and permit planning. Bore length and pipe size matter, along with utilities to expose, pavement, creek crossings, pits and excavator time. Our mobilization plan accounts for the 273 road miles from the Yukon main office to Myrtle Springs. There is no single price factor that applies to every route.
Where the Myrtle Springs facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Myrtle Springs
- U.S. Census Bureau, TIGER/Line 2024: Myrtle Springs boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Myrtle Springs population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Myrtle Springs housing units and year built
- Macrostrat geologic map compilation: map units under Myrtle Springs
- U.S. EPA Safe Drinking Water Information System: public water systems serving Myrtle Springs
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Van Zandt County
- U.S. Geological Survey, Elevation Point Query Service: Myrtle Springs elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Myrtle Springs
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Myrtle Springs
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Myrtle Springs, Texas
Type the address of your job in Myrtle Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Myrtle Springs
Same county: Van · Callender Lake · Edom · Ben Wheeler. All counties: Texas county list.
