Edom Texas Directional Boring: Cuthbert Soil, FM 279 and Murchison Creek
Quick Answer: Edom has Cuthbert fine sandy loam, and Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for proposed lines crossing FM 279. FM 314 is near the 299 road miles from our Yukon, Oklahoma main office. At about 40 inches, Edom soil is often sandy clay loam or clay loam, which can cling to a reamer and grip pipe. Along Murchison Creek, we plan below the channel and check whether the crossing falls under Corps jurisdiction.
Edom bores at a glance
- Incorporated city in Van Zandt County, Texas. Population 367 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 299 miles, about 5.9 hours of driving.
- Ground: Cuthbert soil is mapped on 25 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: FM 279, FM 314 and FM 2339. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Murchison Creek and Cow Creek.
- Public water: Edom Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Edom near FM 279?
Our crews handle directional boring in Edom, Van Zandt County, where Cuthbert fine sandy loam gives way to clay that can load a reamer. The Census Bureau Vintage 2024 estimate puts Edom at 367 residents; in Van Zandt County, we plan underground work around local conditions. We install water, sewer, gas, electric conduit and fiber, with routes that could serve properties along Brig Street or connect across FM 279, depending on the project plan.
Our main office is in Yukon, Oklahoma, and Edom work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan staged reaming and timely pipe pulls where Edom clay can swell around a line.

What does the soil survey show about Edom and Cuthbert soil?
USDA maps Cuthbert fine sandy loam, on 8 to 20 percent slopes, across 25% of Edom. Fine sandy loam is the leading surface texture at 57%, with loamy fine sand at 19% and loam at 15%. About 40 inches down, sandy clay loam accounts for 36% of mapped texture and clay loam for 25%; clay accounts for 18%. Average clay content at that depth is 28%. Clayey material can cling to a reamer, so these mapped patterns help shape the drilling plan but are not site borings.
| USDA soil survey, inside the Edom city limits | What is mapped |
|---|---|
| Soil series mapped | Cuthbert 25 percent, Wolfpen 18 percent, Kirvin 15 percent, Manco 15 percent and Oakwood 14 percent |
| Texture at the surface | fine sandy loam 57 percent, loamy fine sand 19 percent and loam 15 percent |
| Texture about 40 inches down | sandy clay loam 36 percent, clay loam 25 percent and clay 18 percent |
| Engineering class about 40 inches down | lean clay (CL) 56 percent, clayey sand (SC) 22 percent and fat clay (CH) 16 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 33 percent of the area |
| Flood prone soils | 15 percent of the area |
| High corrosion risk for uncoated steel | 47 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 3% of Edom, and none within 40 inches; the typical mapped depth is 49 inches. Queen City Sand, a Lutetian unit of siltstone, sandstone and claystone, describes the local geology, so weathered rock may slow a bore. Seasonal water tables occur within 60 inches across 33%, while flood prone soils cover 15%; wet pits and creek approaches need planning. High steel corrosion risk is mapped across 47%, so the line owner should consider casing and tracer wire materials. HDPE does not share the uncoated steel concern.
How do we drill Edom’s sandy clay loam near FM 279?
For Edom’s sandy clay loam and clay loam, we tune the fluid and reaming sequence to keep the hole stable without forcing pressure toward pavement on FM 279 or Brig Street.
- In Cuthbert fine sandy loam and clayey subsoil, we use thinner drilling fluid with polymer and ream in stages to limit sticky buildup on the tool.
- Where Edom’s sandy soil is mapped, we build a supporting fluid wall and stage the reaming, with pipe ready before the final pass.
- With seasonal water table soils mapped across 33% of Edom, we keep pits small and pump water as needed, especially near Murchison Creek.
- At marked utilities along Brig Street or FM 279, we hydrovac pothole before the drill approaches; a locator tracks the head and records depth and pitch.

Where does a line have to go under Brig Street in Edom?
A bore in Edom can pass beneath FM 279, FM 314, FM 2339 or streets such as Brig Street without cutting the route surface. The mapped roadway lengths inside city limits are 2.9 miles for FM 279, 2.6 miles for FM 314 and 0.9 miles for FM 2339. Brig Street runs 1.62 miles in the city; County Road 4713 runs 0.75 miles and County Road 4807 runs 0.49 miles. Each alignment still needs a site plan for access, pavement and existing lines.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 279 | State highway | 2.9 roadway miles inside | State highway office |
| FM 314 | State highway | 2.6 roadway miles inside | State highway office |
| FM 2339 | State highway | 0.9 roadway miles inside | State highway office |
| Texas State Highway 64 | Highway nearby | 0.8 miles outside | State highway office |
| Murchison Creek | Stream | 1.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cow Creek | Stream | 0.23 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Holloman Branch | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Edom or within one mile outside its limits, and no street and rail crossing is mapped in the city. Murchison Creek runs 1.08 channel miles through Edom, while Cow Creek runs 0.23 miles; three mapped street crossings pass over named streams. A creek bore needs a route planned beneath the channel, and the crossing is checked for federal water jurisdiction. Along County Road 4713, no lakes or ponds are mapped within one mile, so we check the bore route against mapped water features.
Who permits a bore in Edom and Van Zandt County?
Edom’s city streets are under city control, while work in the right of way of FM 279, FM 314 and FM 2339 needs a TxDOT utility permit. The line owner, not the driller, files through TxDOT’s online RULIS system, and the TxDOT Tyler District reviews it; we prepare the bore plan and profile for the owner’s application and work under its permit. At highway crossings, electric, communication and water lines need 60 inches of cover, and pressurized sewer lines need 60 inches. The permit may set another depth. A Murchison Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Edom near Edom Water Supply Corporation?
Edom Water Supply Corporation operates a groundwater well system with 504 service connections serving 1,512 people. For electric service in Van Zandt County, utilities reporting to EIA include Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative. We confirm the line owner for an Edom address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Edom Water Supply Corporation | Public water system | Groundwater wells | 504 connections, 1,512 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Van Zandt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Edom’s median housing year at 1979; 14% of homes were built before 1960, 63% from 1960 to 1999 and 23% in 2000 or later. That mix can mean a job is replacing an older service or bringing a new one to a newer property along Brig Street. At Cow Creek, we hydrovac pothole every marked utility on the bore path before drilling nearby; paint shows position, not depth.

What is near Edom and Brownsboro for our service area?
Edom is in Van Zandt County, at elevation 484 feet, and covers 2.51 square miles. Edom’s ZIP codes are 75754 and 75756, and we account for its Van Zandt County location when planning underground routes. Brownsboro is 5.2 miles south; Callender Lake is 5.3 miles west, and Ben Wheeler is 7.4 miles northwest. Lindale is 14.4 miles northeast, while county seat Canton is 19.4 miles northwest. Our Yukon yard is 299 road miles away, a 5.9 hour drive, which is part of planning work near FM 279 and the other Edom roads.
Places near Edom
- Directional boring in Brownsboro: 5.2 miles south
- Directional boring in Callender Lake: 5.3 miles west
- Directional boring in Ben Wheeler: 7.4 miles northwest
- Directional boring in Chandler: 9.2 miles southeast
- Directional boring in Van: 10.5 miles north
- Directional boring in Lindale: 14.4 miles northeast
What kinds of bores come up near County Road 4713 in Edom?
- Highway crossing: A proposed line beneath FM 279 is bored under the roadway, with the route and cover planned for the TxDOT right of way.
- Street crossing: A route beneath Brig Street can keep pavement intact, with pits placed in dirt on either side of the crossing.
- Creek crossing: A bore beneath Murchison Creek is planned below the channel, with federal jurisdiction checked during planning.
- Water service: A proposed connection near Edom Water Supply Corporation can be routed beneath County Road 4713 rather than through an open cut.
- Fiber conduit: A conduit route along FM 314 can use directional boring to avoid cutting the paved travel surface.
- Utility crossing: Near County Road 4807, marked lines on the proposed bore path are exposed by hydrovac before drilling gets close.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near County Road 4802 in Edom?
For a quote near County Road 4802 in Edom, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. The route matters: a short run beside Brig Street may present different access and crossing needs than a route approaching Murchison Creek.
Mobilization starts with the 299 road miles from Yukon, then the Cuthbert and clayey soil conditions shape equipment time and reaming. We also account for pipe or conduit size, bore length, and how many utilities must be exposed. A crossing beneath FM 279, concrete or pavement, creek or drainage work near Murchison Creek, pits, excavator time and sand backfill all affect the scope. High profile or emergency work can add demands too.
Questions people ask about boring in Edom
Does Trinity Boring Solutions take jobs in Edom, Van Zandt County, and how are crews assigned?
Yes. We take directional boring work in Edom, and our own crews or vetted partner contractor crews handle the site work. The main office remains in Yukon, Oklahoma, while Trinity stays your contact from the first call through the bore log, including a project near FM 279.
Who approves a bore under FM 279 in Edom?
TxDOT handles the highway utility permit for a bore in the FM 279 right of way, with the TxDOT Tyler District reviewing it. The utility line owner files in RULIS, not the drilling contractor. We prepare the bore plan and profile for the owner’s submission and work under the issued permit.
Can a utility line be bored under Murchison Creek in Edom?
A line can be planned beneath Murchison Creek, whose mapped channel runs 1.08 miles through Edom. The route must stay below the channel, and planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction. The exact path and ground conditions determine the bore plan.
Who runs Edom’s public water system, and where does its water come from near FM 314?
Edom Water Supply Corporation runs the public system, which draws from groundwater wells. Public records list 504 service connections serving 1,512 people. For a proposed service near Brig Street, confirm the property’s connection and route with the water system before planning the bore.
Which electric companies report service in Edom, Van Zandt County, and who confirms conduit specs?
Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative report service in Van Zandt County. The specific line owner and conduit requirements need confirmation for the Edom address before a bore is planned near FM 314.
Who is responsible for Edom streets, and does County Road 4807 need to be cut?
Edom is incorporated, so its city streets are under city control. A directional bore can pass beneath a street without cutting its pavement; the authority for a specific route named County Road 4807 should be confirmed before planning. We expose marked utilities along the bore path before drilling near them.
What bore sizes and lengths can Trinity handle near County Road 4802 in Edom?
On FM 2339, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near County Road 4802, the size, footage, Cuthbert soil conditions and crossings help determine the equipment and bore plan.
How much notice does Texas811 need for a bore near Brig Street in Edom?
For a bore near Brig Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. The ticket has a 20 day life; if the start slips more than 14 days past the original notice, make a new request. On County Road 4807, we refresh worn or moved marks through Texas811 before work continues.
What affects the cost of directional boring under FM 279 in Edom?
The price depends on the specific job near FM 279, including bore length and line size, the Cuthbert and clayey ground, and utilities that must be exposed. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. Mobilization reflects the 299 road miles from Yukon; high profile or emergency work can change the scope.
Where the Edom facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Edom
- U.S. Census Bureau, TIGER/Line 2024: Edom boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Edom
- U.S. Census Bureau, American Community Survey 2019 to 2023: Edom housing units and year built
- Macrostrat geologic map compilation: map units under Edom
- U.S. EPA Safe Drinking Water Information System: public water systems serving Edom
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Van Zandt County
- U.S. Geological Survey, Elevation Point Query Service: Edom elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Edom
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Edom
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Edom, Texas
Type the address of your job in Edom. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Edom
Same county: Canton · Wills Point · Grand Saline · Edgewood · Myrtle Springs · Fruitvale. All counties: Texas county list.
