trinityboringsolutions.com

Trinity Texas Directional Boring: Fuller Soil, Texas State Highway 19, Union Pacific

Quick Answer: Trinity Boring Solutions takes directional boring and horizontal directional drilling (HDD) work in Trinity, Texas, including routes under Texas State Highway 19. Trinity is 408 road miles from our Yukon, Oklahoma main office, and Caroline Street is one local route where access affects planning. Fuller soil and fine sandy loam cover much of the city, while loam is common about 40 inches down. That mix can make the hole sticky and calls for staged reaming near Lakefield Street.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Trinity bores at a glance

  • Incorporated city in Trinity County, Texas. Population 2,474 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 408 miles, about 8 hours of driving.
  • Ground: Fuller soil is mapped on 58 percent of the area, with loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 25 percent of the area.
  • Highways inside the boundary: Texas State Highway 19, Texas State Highway 94, FM 1617, FM 230 and FM 356. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: Union Pacific, with 10 mapped street and rail crossings.
  • Public water: City of Trinity, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Texas State Highway 19 in Trinity?

Trinity is a small city in Trinity County, and Trinity Boring Solutions takes directional boring calls for routes under Texas State Highway 19 and its city streets. The Census Bureau Vintage 2024 estimate puts Trinity at 2,474 people, a population figure we keep separate from underground site conditions. We install water, sewer, gas, electric conduit and fiber along roads such as Caroline Street, where a bore can avoid cutting pavement.

Our main office is in Yukon, Oklahoma, and Trinity work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Caroline Street service work, our range runs from 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet. We are a family business that started in 1965 and has done directional boring since 1982, with small service runs and larger crossings within that range.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground should Trinity expect in Fuller soil?

Fuller soil is the leading mapped series in Trinity, covering 58 percent of the city, and Fuller fine sandy loam with 1 to 3 percent slopes covers 51 percent. The USDA soil survey maps fine sandy loam across 80 percent of the surface. About 40 inches down, it maps loam in 67 percent of the area and clay in 18 percent; average clay content at that depth is 30 percent. For Trinity planning, we treat mapped soil patterns as screening information, not test borings, before evaluating underground work. The loam and clay can hold the bore open but may build up on a reamer.

USDA soil survey, inside the Trinity city limitsWhat is mapped
Soil series mappedFuller 58 percent, Kurth 13 percent, Herty 12 percent, Keltys 5 percent and Moten 3 percent
Texture at the surfacefine sandy loam 80 percent, loam 14 percent and silt loam 4 percent
Texture about 40 inches downloam 67 percent, clay 18 percent and sandy clay loam 14 percent
Engineering class about 40 inches downlean clay (CL) 73 percent, clayey sand (SC) 14 percent and fat clay (CH) 13 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches25 percent of the area (0 percent hard rock, 25 percent weathered rock)
Seasonal water table within 60 inches94 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel98 percent of the area

Weathered bedrock is mapped within 60 inches across 25 percent of Trinity, with typical depth at 44 inches, so a route near Texas State Highway 19 may slow where the drill meets harder material. A seasonal water table is mapped within 40 inches in 94 percent of the city, which can leave Caroline Street pits wet and calls for pumping. Flood prone soils cover 1 percent. Across Trinity, mapped high steel corrosion risk covers 98 percent, so we advise line owners to consider casing and tracer wire materials. The USDA map also shows Quartz Sand Decomposition Residuum, a Cenozoic unit, where sand may loosen behind the bit.

What does it take to bore Trinity loam?

In Trinity, loam about 40 inches down and Fuller fine sandy loam at the surface call for controlled fluid and staged reaming. We track the head as the hole advances, especially where wet ground can soften steering.

  1. With fine sandy loam mapped across 80 percent of Trinity’s surface, we use staged reaming and keep the pipe ready before the final pass so the hole does not sit open.
  2. Loam and clay are common about 40 inches down, so we control fluid and reamer buildup on a Caroline Street route and pull pipe while the hole is fresh.
  3. A seasonal water table is mapped within 40 inches across 94 percent of Trinity; we keep pits small and pump water where a Lakefield Street site is wet.
  4. Before approaching marked lines near the City of Trinity water system, we hydrovac pothole them; a surface paint mark shows position, not depth.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a Trinity bore have to cross near Turner Creek?

Trinity has Texas State Highway 19 and Texas State Highway 94 within city limits, along with FM 1617, FM 230 and FM 356, so road bores need a route and depth plan for each right of way. Caroline Street is the longest named street at 2.28 miles; Robb Street runs 2.18 miles and Main Street 1.51 miles. A bore beneath any of these streets can keep pavement intact, while the specific crossing determines pit placement and utility exposure.

CrossingTypeMapped extentWho has a say
Texas State Highway 19State highway3.6 roadway miles insideState highway office
Texas State Highway 94State highway1.9 roadway miles insideState highway office
FM 1617State highway1.7 roadway miles insideState highway office
FM 230State highway1 roadway miles insideState highway office
FM 356State highway0.8 roadway miles insideState highway office
Union PacificRailroad4.36 track miles insideThe railroad
Turner CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Village CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Livingston ReservoirLake or pond11,785 acres, nearbyChecked for Corps of Engineers jurisdiction
Sentell LakeLake or pond20 acres, nearbyChecked for Corps of Engineers jurisdiction
Mill PondLake or pond18 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.36 track miles in Trinity on its Palestine Subdivision, and public maps show 10 street and rail crossings in the city. Each proposed track crossing needs the railroad owner’s agreement. No named streams are mapped inside city limits, but Turner Creek is 0.8 miles from the boundary and Village Creek is 1.0 mile away. Livingston Reservoir, Sentell Lake and Mill Pond are also within one mile. The mapped street crossings of named streams inside the city are none.

Who approves a Trinity bore near Union Pacific and its highways?

For a line crossing Texas State Highway 19 in Trinity, the required cover is 60 inches for electric and communication lines and water lines, and 60 inches for pressurized sewer; a line running along the right of way has different cover requirements. TxDOT’s Lufkin District reviews the utility permit. The utility owner applies through RULIS, while we prepare the bore plan and profile for its filing. Existing highway pavement is bored or tunneled, and the bore on a rural highway extends beneath all travel lanes. A Union Pacific track crossing needs an agreement from the railroad owner that sets crossing conditions. A creek or lake route is checked for Corps jurisdiction during planning. Trinity streets are city streets, while highway right of way follows state approval.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Trinity County’s water system?

The City of Trinity owns the public water system, which draws from groundwater wells and serves 4,619 people through 2,614 service connections. For hydrovac potholing near those water lines or an electric conduit route, we expose marked utilities before the drill approaches. Electric service reported in Trinity County includes Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Sam Houston Electric Cooperative. The owner of the line at a Caroline Street address must be confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of TrinityPublic water systemGroundwater wells2,614 connections, 4,619 people served
Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Sam Houston Electric CooperativeElectric utilities reporting service in Trinity CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Trinity’s median housing year at 1984; 19 percent of homes were built before 1960, 63 percent from 1960 to 1999 and 18 percent in 2000 or later. On older streets such as Main Street, a project may replace existing pipe; newer housing can call for a service extension. Texas811 paint marks position, not depth, so marked lines on the bore path are hydrovac exposed before drilling near them.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Trinity in relation to Riverside?

Trinity is in Trinity County, 6.8 miles north of Riverside and 2.8 miles west of Westwood Shores. The city covers 3.79 square miles at an elevation of 230 feet, and its ZIP code is 75862. Lovelady is 13.4 miles north; Huntsville, the nearest larger city, is 20.0 miles southwest. Groveton, the county seat, is 16.6 miles northeast. From our Yukon, Oklahoma main office, Trinity is 408 road miles and an 8.0 hour drive, which factors into mobilization for work near Texas State Highway 19.

Places near Trinity

What kinds of bores could come up on Caroline Street in Trinity?

  • Highway crossing: A Texas State Highway 19 bore needs a planned alignment beneath the travel lanes, with the utility permit handled through TxDOT.
  • Water service: A connection near Caroline Street can tie into the City of Trinity groundwater system after existing marked lines are exposed.
  • Fiber conduit: A route along Lakefield Street can pass beneath pavement without opening a trench across the street.
  • Rail crossing: A route beneath Union Pacific’s Palestine Subdivision requires an agreement from the track owner before the crossing is set.
  • Creek crossing: A proposed route toward Turner Creek needs channel depth planning and a check for Corps jurisdiction during planning.
  • Electric conduit: Near Robb Street, the electric line owner is confirmed before conduit specifications and the bore route are finalized.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Trinity bore under Texas State Highway 19?

A map pin matters for a Trinity quote because a bore under Texas State Highway 19 has different access and permit conditions from a route near Turner Creek. Send the address or pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us place the pits and identify crossings.

Length and pipe or conduit size shape the equipment and hole needed in Trinity, while Fuller fine sandy loam and the mapped clay at depth affect reaming and fluid. The count of utilities to expose, concrete or pavement and creek or drainage crossings add work; Union Pacific track crossings need separate planning. Pits, excavator time and sand backfill also matter. Mobilization is part of the scope because the Yukon yard is 408 road miles away. High profile or emergency work can require a different plan.

Questions people ask about boring in Trinity

Does Trinity Boring Solutions take jobs in Trinity County, and how are Trinity crews assigned?

Yes, we take directional boring work in Trinity County and across Texas. The main office is in Yukon, and we use our own crews as well as satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including for a route under Texas State Highway 19.

Who approves a Trinity bore beneath Texas State Highway 19?

TxDOT reviews the utility permit through its Lufkin District for a Texas State Highway 19 bore in Trinity. The utility owner submits the application in RULIS, and we provide the bore plan and profile for that filing. Cover depth depends on line type, and the permit can set a different depth.

What should we account for when boring beneath Union Pacific track in Trinity?

A bore beneath Union Pacific’s 4.36 track miles in Trinity needs an agreement from the railroad that owns the track. The agreement establishes the crossing conditions, including casing, depth and flagging. Where a route also touches Texas State Highway 19 right of way, TxDOT asks for a copy.

Can Trinity bore a line under Turner Creek?

A line can be planned beneath Turner Creek, which is 0.8 miles from Trinity’s city limits, subject to route conditions. The crossing plan accounts for depth below the channel and checks whether the U.S. Army Corps of Engineers has jurisdiction. Turner Creek is outside the city, so the site location matters.

Who runs Trinity’s public water system, and do its groundwater wells supply it?

The City of Trinity owns the public water system, and we account for its groundwater wells when planning underground work. Trinity’s system serves 4,619 people through 2,614 service connections, counts we consider when planning underground work near water services. Near Caroline Street, we would expose marked lines before drilling near a planned connection or crossing.

Which electric company should I check with for a Trinity County conduit bore?

The electric line owner for a Trinity County address must be confirmed before conduit specifications are set. Utilities reporting service in the county include Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Sam Houston Electric Cooperative. For a route near Lakefield Street, the address identifies which owner to coordinate with.

What bore sizes and lengths can Trinity handle near Lakefield Street?

For Trinity work, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A Lakefield Street service connection and a larger crossing have different pit and equipment needs, so the proposed size and footage help shape the plan.

How much notice does Texas811 need for a Trinity bore on Caroline Street?

For a Caroline Street excavation, Texas law requires a Texas811 locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, request a new ticket. When marks are worn or moved in Trinity, we wait until they are refreshed through Texas811 before continuing.

What affects the price of a Trinity directional bore under Texas State Highway 19?

The length and line size come first because they determine the bore and equipment needed under Texas State Highway 19. Fuller soil and clay at depth affect drilling, while pavement, exposed utilities, Union Pacific crossings, creek or drainage routes, pits and backfill add scope. Mobilization also reflects Trinity’s 408 road miles from Yukon.

Where the Trinity facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Trinity

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Trinity, Texas

Type the address of your job in Trinity. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Trinity

Same county: Groveton. All counties: Texas county list.