Van Texas Directional Boring: Freestone Soil, Texas State Highway 110, Big Sandy Creek
Quick Answer: At Texas State Highway 110, we do directional boring, also called horizontal directional drilling (HDD), after confirming the line owner; the City of Van water system uses groundwater wells. Our Yukon, Oklahoma main office is 289 road miles away, a factor when planning work near Big Sandy Creek. Freestone soil covers 71 percent of Van, and clay below the surface can grip pipe, so reaming and pull timing matter.
Van bores at a glance
- Incorporated city in Van Zandt County, Texas. Population 2,944 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 289 miles, about 5.6 hours of driving.
- Ground: Freestone soil is mapped on 71 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 110 and FM 16. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Big Sandy Creek.
- Public water: City of Van, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring under Texas State Highway 110 in Van?
Trinity Boring Solutions takes directional boring work in Van, where the City of Van runs a groundwater water system and several utilities report electric service in Van Zandt County; confirming the line owner matters before a bore. The Census Bureau Vintage 2024 estimate puts Van’s population at 2,944. Our crews install water, sewer, gas, electric conduit and fiber along routes such as Ohio Street and Texas State Highway 110.
Our main office is in Yukon, Oklahoma, and Van work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for the sticky clay mapped below Freestone soil in Van; staged reaming and a same day pull can help keep clay from gripping pipe.

What does the soil survey show about Freestone soil in Van?
The USDA soil survey maps Freestone fine sandy loam across 71 percent of Van, so the surface may look workable while the deeper cut calls for a different plan. At about 40 inches below the surface, clay is mapped across 71 percent of the area, clay loam across 23 percent and sandy clay loam across 7 percent. Fine sandy loam is the mapped surface texture across 78 percent. These are mapped soil patterns, not test borings, and the clay can stick to a reamer or grip the pipe.
| USDA soil survey, inside the Van city limits | What is mapped |
|---|---|
| Soil series mapped | Freestone 71 percent, Woodtell 16 percent, Bernaldo 7 percent, Nahatche 4 percent and Derly 3 percent |
| Texture at the surface | fine sandy loam 78 percent, loam 19 percent and silt loam 3 percent |
| Texture about 40 inches down | clay 71 percent, clay loam 23 percent and sandy clay loam 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 86 percent, lean clay (CL) 7 percent and clayey sand (SC) 7 percent |
| Average clay content about 40 inches down | 51 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 84 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 93 percent of the area |
Bedrock is not mapped in the top five feet of Van, but the geologic map names the Wilcox Group, undivided, a Paleogene unit; that does not rule out rock deeper down. The USDA survey maps a seasonal water table within 60 inches across 84 percent of the area, so pits may need pumping. Flood prone soils cover 4 percent, including near Big Sandy Creek, where depth planning matters. In Van Zandt County, we account for high steel corrosion risk mapped across 93 percent when selecting casing and tracer wire materials.
How is a bore run through Van clay?
In Van, we match the bore plan to the heavy clay mapped below Freestone fine sandy loam, then track the head and log depth and pitch as it advances.
- Freestone soil covers 71 percent of Van, with heavy clay mapped below; we use thinner fluid and staged reaming to limit sticky buildup on the reamer.
- Clay can swell and grip a pipe on a Maple Street route, so we plan to pull the pipe the same day the hole is opened.
- Seasonal water tables are mapped within 60 inches across 84 percent of Van; near Big Sandy Creek, we keep pits small and pump water as needed.
- Before a bore near Ohio Street, we hydrovac expose marked utilities, then track the drill head from the surface and log its depth and pitch.

Where does a line have to go under Ohio Street in Van?
Van routes may need to pass beneath Texas State Highway 110, which has 2.1 mapped roadway miles inside the city; Interstate 20 runs along or touches the limits. A line beneath existing highway pavement calls for boring or tunneling rather than an open cut. Ohio Street is the longest named street at 2.05 miles, followed by Main Street at 2.0 miles and Maple Street at 1.32 miles. Those long street corridors can make a bore useful where pavement or driveways need to stay intact.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 110 | State highway | 2.1 roadway miles inside | State highway office |
| FM 16 | State highway | 0.1 roadway miles inside | State highway office |
| Interstate 20 | Highway nearby | Runs along or touches the city limits | State highway office |
| Big Sandy Creek | Stream | 1.79 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Neches River | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Van or within one mile outside its limits, and no street and rail crossings are mapped in the city. Big Sandy Creek runs for 1.79 channel miles inside Van, with seven mapped street crossings of named streams; a creek route needs depth planning and a jurisdiction check. No lakes or ponds are mapped within one mile, so they do not add a local crossing feature.
Who approves a bore on Van Zandt County roads?
Texas State Highway 110 and FM 16 are state highways, so work in their right of way goes through the Texas Department of Transportation, reviewed by the TxDOT Tyler District for Van Zandt County. The utility that owns the line submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT requires boring or tunneling beneath existing highway pavement, with cover and crossing details set under its rules and the permit. City streets such as Ohio Street belong to the incorporated City of Van. Big Sandy Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Van system?
The City of Van public water system uses groundwater wells and reports 1,393 service connections serving 2,993 people. For electric service in Van Zandt County, reporting utilities include Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative. The provider for a particular Ohio Street address is not established by that county list, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Van | Public water system | Groundwater wells | 1,393 connections, 2,993 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Van Zandt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Van’s median housing year at 1978; 20 percent of homes were built before 1960, 57 percent from 1960 to 1999 and 23 percent in 2000 or later. That mix can mean work for replacement lines as well as newer services along Maple Street. We hydrovac expose every marked utility on the planned bore path before drilling near it. On an Ohio Street route, paint shows position, not depth, so each marked line needs to be exposed before the drill approaches.

Do you cover Van and nearby Ben Wheeler?
Van is in Van Zandt County, covers 2.99 square miles and sits at an elevation of 484 feet. ZIP code 75790 serves Van, and we use it to prepare underground work near Main Street. Ben Wheeler is 6.5 miles southwest, Edom is 10.5 miles south and Hideaway is 10.7 miles east. Lindale, the nearest larger city, is 13.6 miles east; Canton, the county seat, is 13.3 miles west. From our Yukon yard, Van is 289 road miles and a 5.6 hour drive, which is part of planning a crew mobilization for a Big Sandy Creek crossing.
Places near Van
- Directional boring in Ben Wheeler: 6.5 miles southwest
- Directional boring in Edom: 10.5 miles south
- Directional boring in Hideaway: 10.7 miles east
- Directional boring in Grand Saline: 11.5 miles north
- Directional boring in Callender Lake: 11.7 miles south
- Directional boring in Lindale: 13.6 miles east
Which jobs call for a bore near Maple Street in Van?
- Water service: A service route near the City of Van system needs its water line owner confirmed before we plan a connection bore.
- Highway crossing: A route beneath Texas State Highway 110 needs a bore plan shaped around highway pavement and the right of way.
- Fiber conduit: A fiber route along Ohio Street can pass below pavement without cutting the street surface.
- Creek crossing: A line beneath Big Sandy Creek needs a planned depth and a jurisdiction check during planning.
- Street service: A replacement route near Maple Street starts with locating and exposing marked lines before drilling nearby.
- Drainage bore: Unnamed drainage in Van can affect a route, pit placement and the amount of water to manage.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Big Sandy Creek in Van?
A map pin matters near Big Sandy Creek because the exact route determines whether the bore meets a creek, a street or nearby drainage. For a Van quote, send the address or pin, what will go in the ground, pipe or conduit size and footage. A sketch or plans help us see the route and the work space.
A straightforward route along Maple Street with clear access is simpler to plan than a crossing beneath Texas State Highway 110 or Big Sandy Creek. The scope also depends on length, pipe size, Freestone soil and its sticky clay, utilities to expose, pavement, drainage crossings, pits and excavator time. Van is 289 road miles from Yukon, so mobilization affects the plan; urgent or high profile work can add coordination needs.
Questions people ask about boring in Van
Does Trinity Boring Solutions take jobs in Van Zandt County, and how are Van crews assigned?
Yes, we take directional boring work in Van Zandt County and staff Van jobs with our own crews or crews from vetted drilling partners. The Yukon office stays involved from the first call through the bore log, so the coordinator has one point of contact even when a partner crew is on site near Ohio Street.
Will a bore in Van hit rock below Freestone soil?
The USDA soil survey does not map bedrock in Van’s top five feet, but that does not rule out deeper rock. The geologic map names the Wilcox Group, undivided, a Paleogene unit. At a particular Texas State Highway 110 route, the actual ground can differ from mapped patterns, so the drilling plan accounts for conditions encountered.
Who approves a Van bore under Texas State Highway 110?
The Texas Department of Transportation handles work in the Texas State Highway 110 right of way, and the TxDOT Tyler District reviews it for Van Zandt County. The utility owner files through RULIS; we provide the bore plan and profile for that application. The permit sets the project requirements for the highway crossing.
Can a line be bored beneath Big Sandy Creek in Van?
A bore beneath Big Sandy Creek can be planned, with the route depth designed around the channel and the crossing checked for U.S. Army Corps of Engineers jurisdiction. The creek runs for 1.79 channel miles inside Van. Its mapped street crossings make the exact route important before pit locations and drilling access are set.
Who runs Van’s public water system in Van Zandt County, and where does its water come from?
The City of Van owns the public water system, which gets water from groundwater wells. Public records list 1,393 service connections serving 2,993 people. For a bore near Ohio Street, we still confirm the specific line owner and route before setting the plan.
Which electric company owns lines at a Van Zandt County address in Van?
The owner depends on the address; county reporting lists Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative. We confirm the owner for a Van conduit route before planning it, since the county list does not identify the provider at each Maple Street property.
Can I reach Trinity after hours about an urgent bore on Maple Street in Van?
Yes, our phone is answered 24 hours a day at (405) 409-7423 for an urgent Van job. Tell us whether the route is near Maple Street, what line is involved and what has changed. We can then discuss the next steps for the work and the site conditions.
How early should I request an Ohio Street locate in Van, and what if marks move?
Texas811 needs a locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If an Ohio Street start slips more than 14 days past the original notice, make a new request. Before boring resumes on FM 16, we have worn or moved marks refreshed through Texas811.
What affects the price of a Van bore under Texas State Highway 110?
The job scope drives the price: length, pipe or conduit size, Freestone clay, utilities to expose, pavement, creek crossings, pits and excavator time all matter. A Texas State Highway 110 crossing has different planning needs from a short street route. The 289 road miles from Yukon also affect mobilization, while urgent work can add coordination.
Where the Van facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Van
- U.S. Census Bureau, TIGER/Line 2024: Van boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Van
- U.S. Census Bureau, American Community Survey 2019 to 2023: Van housing units and year built
- Macrostrat geologic map compilation: map units under Van
- U.S. EPA Safe Drinking Water Information System: public water systems serving Van
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Van Zandt County
- U.S. Geological Survey, Elevation Point Query Service: Van elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Van
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Van
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Van, Texas
Type the address of your job in Van. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Van
Same county: Canton · Wills Point · Edgewood · Myrtle Springs · Fruitvale. All counties: Texas county list.
