trinityboringsolutions.com

Warren Texas Directional Boring: Otanya Soil, US 287 and Black Creek

Quick Answer: Otanya very fine sandy loam is common in Warren, and its clayier ground needs a controlled bore near Black Creek. Trinity Boring Solutions performs directional boring, also called horizontal directional drilling (HDD), in Texas for crossings such as US 287 in Warren. That work is 451 road miles from our Yukon, Oklahoma main office, with Magnolia Street also shaping access and setup. At about 40 inches, sandy clay loam is mapped across much of Warren, and its clay can grip pipe if a hole sits open. Black Creek crossings need a planned path and careful utility exposure.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Warren bores at a glance

  • Unincorporated community in Tyler County, Texas. Population 677 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 451 miles, about 9.1 hours of driving.
  • Ground: Otanya soil is mapped on 64 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: US 287, US 69, FM 1943 and FM 3290. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Black Creek.
  • Public water: Warren Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 287 in Warren?

Trinity Boring Solutions takes directional boring work in Warren, Tyler County, including routes beneath US 287 and local streets. Otanya very fine sandy loam is common here, so we plan the bore around ground that can grip a pipe if the hole stays open. The 2020 Census count is 677; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along routes such as Magnolia Street.

Our main office is in Yukon, Oklahoma, and Warren work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From 3/4 inch service lines to 48 inch casing, our range suits a small service along Magnolia Street or a larger route near US 287. Our family business began in 1965, and we have done directional boring since 1982; Warren is 451 road miles from our Yukon main office.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Warren and Otanya soil?

The USDA soil survey maps Otanya across 64 percent of Warren, mostly as Otanya very fine sandy loam, so the near surface is not a uniform clay layer. Very fine sandy loam makes up 67 percent of mapped surface texture, while fine sandy loam accounts for 23 percent. At about 40 inches, sandy clay loam is mapped across 71 percent of the area, with an average clay content of 25 percent. Only 1 percent is mapped as sandy at that depth. These are soil survey patterns, not test borings, so a specific route near Black Creek still needs field planning.

USDA soil survey, inside the Warren mapped community boundaryWhat is mapped
Soil series mappedOtanya 64 percent, Kirbyville 18 percent, Hatliff 8 percent, Pinetucky 3 percent and Sorter 3 percent
Texture at the surfacevery fine sandy loam 67 percent, fine sandy loam 23 percent and loam 8 percent
Texture about 40 inches downsandy clay loam 71 percent, loam 18 percent and fine sandy loam 8 percent
Engineering class about 40 inches downlean clay (CL) 85 percent, silty clayey sand (SC SM) 8 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches55 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel22 percent of the area

Bedrock is mapped within 60 inches in 2 percent of Warren, with none mapped within 40 inches; the typical depth is 58 inches. A seasonal water table is mapped within 60 inches across 55 percent of the area, so pits may need pumping. Flood prone soils cover 8 percent, including ground where Black Creek calls for depth planning. High steel corrosion risk is mapped across 22 percent, a concern for steel casing and tracer wire that the line owner can address through material choices. The geologic map unit is Alluvial pebble gravel and sand, of Gelasian age; gravel and chert can make the drill head wander.

What does it take to bore Warren’s sandy clay loam?

We bore Warren’s sandy clay loam with staged reaming and close tracking because clay at about 40 inches can grip pipe, while Black Creek and shallow groundwater shape pit placement.

  1. Before drilling near Black Creek or a Warren street, we use Texas811 marks as position clues, then hydrovac expose every marked line because surface marks do not show depth.
  2. Across Otanya ground, we use thinner drilling fluid with polymer, ream in stages and have the pipe ready before the hole can grip it.
  3. Where Warren’s seasonal water table affects pits near Black Creek, we keep pits small and pump as needed; flood prone ground calls for depth planning below the channel.
  4. On a route near US 287, we track the drill head from the surface and log depth and pitch as the bore advances beneath pavement.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads, tracks or creeks does a Warren bore cross near Black Creek?

US 287 and US 69 each have 2.6 mapped roadway miles inside Warren, while FM 1943 has 4.4 and FM 3290 has 0.7. A route crossing US 287 or US 69 needs a bore plan that keeps the roadway surface intact. Magnolia Street is the longest named street at 1.49 miles, followed by Warren Cemetery Road at 1.16 miles and Warrior Drive at 0.95 miles. Terrell Place adds another local route to consider when locating pits and checking access.

CrossingTypeMapped extentWho has a say
US 287US highway2.6 roadway miles insideState highway office
US 69US highway2.6 roadway miles insideState highway office
FM 1943State highway4.4 roadway miles insideState highway office
FM 3290State highway0.7 roadway miles insideState highway office
Black CreekStream5.87 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Warren or within 1 mile outside the community boundary, and none of the mapped street crossings is a rail crossing. Black Creek runs 5.87 channel miles through the community, with 8 mapped street crossings of named streams. A bore near the creek needs a path planned below the channel and a check for U.S. Army Corps of Engineers jurisdiction. We account for Black Creek in Warren bore planning; no lakes or ponds are mapped within 1 mile.

Who has to sign off on a Warren bore in Tyler County?

Warren is unincorporated, so local streets such as Magnolia Street are not under a city government; county or state authority depends on the road. For work in the right of way of US 287, US 69, FM 1943 or FM 3290, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Beaumont District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under its permit. For Warren crossings on US 287, we follow TxDOT requirements to bore or tunnel beneath existing highway pavement. A Black Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Warren Water Supply Corporation?

Warren Water Supply Corporation is a locally owned public water system that draws from groundwater wells and serves 1,834 people through 725 service connections. Electric service reported in Tyler County includes Entergy Texas and Sam Houston Electric Cooperative, but that does not establish which company owns a line at every Warren address. We confirm the owner before planning a conduit bore. Near the water system or electric routes, hydrovac potholing exposes marked utilities before drilling close to them.

Line ownerWhat it isSourceSize
Warren Water Supply CorporationPublic water systemGroundwater wells725 connections, 1,834 people served
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Tyler CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Warren’s median housing year at 2001; 3 percent of homes were built before 1960, 45 percent from 1960 to 1999 and 52 percent in 2000 or later. That mix can mean either a replacement line or a newer service along streets such as Warren Cemetery Road. We expose each marked utility on the bore path before drilling near it, since surface marks do not show depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Warren from Wildwood and our Yukon yard?

Warren is an unincorporated community in Tyler County, with an elevation of 175 feet and a land area of 4.22 square miles. ZIP code 77664 covers the area. Ivanhoe is 4.7 miles north, and Wildwood is 6.2 miles south; Woodville, the county seat, is 11.2 miles north. Silsbee is the nearest larger city, 23.6 miles southeast. Warren is 451 road miles and a 9.1 hour drive from our Yukon, Oklahoma yard, a distance that affects mobilization for work on routes such as US 287.

Places near Warren

Which jobs call for a bore near Magnolia Street in Warren?

  • Highway crossing: A bore beneath US 287 keeps the highway surface intact and needs a route plan that fits the utility owner’s TxDOT permit.
  • Water service: A service near Warren Water Supply Corporation can connect to a groundwater system, with the route checked against marked lines first.
  • Fiber route: A fiber bore along Magnolia Street can pass beneath pavement without an open cut across the street.
  • Creek crossing: A Black Creek bore needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A replacement line near Warren Cemetery Road can be bored beneath the road after marked utilities are exposed.
  • Conduit route: A conduit bore near Warrior Drive needs the electric line owner confirmed before the route and specifications are set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Terrell Place in Warren?

For a Warren quote, send a map pin or address near Terrell Place or another project feature; the exact spot shows us how the route meets roads, utilities or Black Creek. We need the underground material, pipe or conduit size, and footage for a bore near Magnolia Street in Warren. A sketch or plans help us review the path and access.

The route and ground both shape a Warren bore: Otanya soil and sandy clay loam affect drilling, while crossings of US 287 or Black Creek can add planning and exposure work. Pipe or conduit size, footage, pavement, pits, excavator time and sand backfill also matter. Mobilization reflects the 451 road miles from Yukon, and high profile or emergency work can change the required scope.

Questions people ask about boring in Warren

Does Trinity take directional boring work in Warren, Tyler County, and who staffs it?

Yes, we take directional boring work in Warren, Tyler County, including routes near US 287. Our own crews and satellite yards run by partner drilling contractors we have vetted can staff the work. We handle each Warren project from first call through bore log, regardless of which crew is on site near Warrior Drive.

Who runs Warren’s public water system in Tyler County, and where does it come from?

Warren Water Supply Corporation runs the locally owned public water system, and its source is groundwater wells. The system serves 1,834 people through 725 connections. For a bore near Magnolia Street, we check marked utilities and the planned route rather than assuming the public water line’s exact location.

Which electric companies report service in Warren, Tyler County, and who confirms conduit specs?

Entergy Texas and Sam Houston Electric Cooperative report electric service in Tyler County, but those records do not identify the owner at every Warren address. The line owner must be confirmed before conduit specifications are planned. That check matters for a proposed conduit route near Warrior Drive or US 69.

Who controls Warren streets such as Warrior Drive, and does a bore require cutting one?

Warren has no city government, so Warrior Drive is under county authority rather than a city street department. A directional bore can pass beneath pavement without an open cut, subject to the road authority’s requirements. For state highway right of way, such as US 287, the utility owner needs the TxDOT permit.

How old are Warren’s homes and buried lines near Warren Cemetery Road?

The American Community Survey 2019 to 2023 estimates put Warren’s median housing year at 2001, but that does not date buried lines along Warren Cemetery Road. A project may replace an older line or serve newer construction. We use Texas811 marks and expose marked utilities on the bore route before drilling near them.

Can groundwater or flood prone ground affect a bore pit near Black Creek in Warren?

Yes, it can. A seasonal water table is mapped within 60 inches across 55 percent of Warren, and flood prone soils cover 8 percent. Near Black Creek, we plan pit placement and bore depth around those conditions, keep pits small where water is present and pump as needed.

What bore sizes and lengths can Trinity handle near Terrell Place in Warren?

Our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Terrell Place can be scoped once we know the route, what the line carries and its size. Ground and crossings affect the method and equipment.

How much notice does Texas811 need for a bore on Magnolia Street in Warren?

For a Magnolia Street excavation, make the Texas811 request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our Warren start near County Road 4755 moves more than 14 days past the original notice, we make a new request. Before we continue work near Terrell Place in Warren, we get worn or moved marks refreshed through Texas811.

What affects the price of a directional bore under US 287 in Warren?

The job scope drives the price. For a US 287 route, factors include footage, pipe or conduit size, Otanya ground, utilities crossed and exposed, pavement, creek crossings, pits, excavator time and backfill. Mobilization also matters because Warren is 451 road miles from our Yukon yard; high profile or emergency work can change the scope.

Where the Warren facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Warren

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Warren, Texas

Type the address of your job in Warren. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Warren

Same county: Colmesneil · Chester. All counties: Texas county list.