Garceno Texas Directional Boring: Jimenez Soil, FM 649 and Arroyo Garceno
Quick Answer: Can we get a line beneath FM 649 or Arroyo Garceno without cutting the surface? We can plan directional boring, also called horizontal directional drilling (HDD), for Garceno crossings, subject to the route and site conditions. Garceno is 729 road miles from our Yukon, Oklahoma main office, so a route near US 83 affects crew mobilization. Jimenez soil covers 62 percent of the mapped area, and its variable texture at 40 inches calls for checking the ground as the bore advances.
Garceno bores at a glance
- Unincorporated community in Starr County, Texas. Population 440 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 729 miles, about 14.1 hours of driving.
- Ground: Jimenez soil is mapped on 62 percent of the area, with variable about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 19 percent of the area.
- Highways inside the boundary: FM 649. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Garceno Loop?
We take directional boring work in Garceno, an unincorporated community in Starr County with 440 people in the 2020 Census count. Along Garceno Loop, Rosales Drive or Delia Lane, we can bore routes for water, sewer, gas, electric conduit or fiber without opening the full street. The specific route and marked utilities determine how the bore is planned.
Our main office is in Yukon, Oklahoma, and Garceno work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service run near Rosa’s Loop or a larger casing route, we handle sizes from 3/4 inch service lines to 48 inch casing and bores from 10 feet to 5,000 feet. For planned crossings along FM 649 in Garceno, our family business dates to 1965, and we have done directional boring since 1982.

What is Jimenez soil like to bore in Garceno?
The USDA soil survey maps Jimenez soil across 62 percent of Garceno, with very gravelly loam at the surface and variable texture at 40 inches. Copita fine sandy loam and Ramadero loam each cover 19 percent of the mapped area. The survey reports an average clay content of 27 percent at 40 inches, while sandy ground is not mapped at that depth. These are mapped soil patterns, not test borings, so a route near Garceno Loop still needs field checks.
| USDA soil survey, inside the Garceno mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Jimenez 62 percent, Copita 19 percent and Ramadero 19 percent |
| Texture at the surface | very gravelly loam 62 percent, fine sandy loam 19 percent and loam 19 percent |
| Texture about 40 inches down | variable 62 percent, bedrock 19 percent and sandy clay loam 19 percent |
| Engineering class about 40 inches down | lean clay (CL) 19 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 19 percent of the area (0 percent hard rock, 19 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 19 percent of the area |
| High corrosion risk for uncoated steel | 19 percent of the area |
Bedrock is mapped within 40 inches across 19 percent of Garceno, typically at 37 inches, and it is mapped as weathered rather than hard bedrock. The Jackson Group, an Eocene unit described as mostly sandstone with lesser clay, adds a reason to watch for changing ground. Seasonal water table soils are not mapped within 60 inches, but flood prone soils cover 19 percent. For Garceno work coordinated with the TxDOT Pharr District, we advise line owners to consider casing and tracer wire materials where high steel corrosion risk is mapped across 19 percent.
How do we drill Garceno’s variable ground?
For a bore near Garceno Loop, we adjust the drilling plan to the mapped variable texture and check the route as we go. The USDA soil survey guides planning, but it does not replace field observations.
- Where Jimenez soil shifts from very gravelly loam to variable texture at 40 inches, we track the drill head and log its depth and pitch as the route advances.
- The mapped bedrock depth of 37 inches on part of Garceno calls for watching the soil to rock transition and slowing down if the head meets weathered sandstone.
- Near FM 649 pavement, we manage drilling fluid returns carefully so pressure does not lift the road surface, and plan pits in the dirt beyond the pavement.
- By Arroyo Garceno, flood prone soils mapped across 19 percent of the area make channel depth and pit placement part of the crossing review.

Which roads or creeks can a Garceno bore cross near Arroyo Garceno?
FM 649 runs 0.4 roadway miles inside the mapped Garceno community boundary, and US 83 runs along or touches that boundary. A route beneath either highway needs a plan that accounts for the road right of way. Garceno Loop is the longest named street at 0.75 miles, followed by Rosa’s Loop at 0.51 miles and Rosales Drive at 0.36 miles. Delia Lane adds another local route where a bore can avoid cutting the street surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 649 | State highway | 0.4 roadway miles inside | State highway office |
| US 83 | Highway nearby | Runs along or touches the city limits | State highway office |
| Arroyo Garceno | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Arroyo Grande | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Garceno or within 1 mile outside its boundary, so no local track crossing is shown. Arroyo Garceno and Arroyo Grande are each 0.2 miles from the boundary, and no named stream crossing of a street is mapped inside the community. A planned bore near either arroyo still needs site review for the channel and access. For Garceno bore planning near Arroyo Grande, no lakes or ponds are mapped within 1 mile, though we verify water features along the route.
Do I need a permit to bore in Garceno or Starr County?
Garceno has no city government, so a street bore is handled by the county or, on a state route, by TxDOT rather than a city office. For work in the FM 649 or US 83 right of way, the utility that owns the line files through TxDOT’s RULIS system, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under its permit. TxDOT rules set highway cover depths by line type, including 60 inches for electric and communication crossings and 60 inches for water crossings. No railroad crossing is mapped near Garceno. Arroyo Garceno and Arroyo Grande are outside the boundary, and any planned water crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the utility lines in Garceno and Starr County?
The water provider for a specific Garceno address has to be confirmed with the county or local water district before a bore is planned; available records do not identify a provider by community. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but that does not identify the owner at every address. Before a conduit route near Garceno Loop is planned, we confirm the line owner and expose marked utilities by hydrovac potholing so their depth is known.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Garceno’s median housing year at 2011; 54 percent of units were built in 2000 or later, and 46 percent from 1960 to 1999. Housing age does not establish the age of buried lines, so a replacement bore near Rosa’s Loop still needs utility checks. We expose marked utilities on the bore path before drilling near them, since locate marks show position rather than depth.

How far is Garceno from San Juan and our Yukon yard?
Garceno is a 0.23 square mile census designated place in Starr County at an elevation of 237 feet, and its ZIP code is 78584. San Juan is 0.3 miles northwest; Loma Linda West is 0.8 miles northeast; La Rosita is 0.9 miles southeast; La Chuparosa is 1.0 mile southeast; and Miguel Barrera is 1.2 miles east. Roma, the nearest larger city, is 3.9 miles west, while county seat Rio Grande City is 7.7 miles east. From our Yukon yard, Garceno is 729 road miles and a 14.1 hour drive, a distance that affects mobilization for work near FM 649.
Places near Garceno
- San Juan: 0.3 miles northwest
- Loma Linda West: 0.8 miles northeast
- La Rosita: 0.9 miles southeast
- La Chuparosa: 1 miles southeast
- Miguel Barrera: 1.2 miles east
- Directional boring in Roma: 3.9 miles west
What kinds of bores come up near Rosales Drive in Garceno?
- Highway crossing: A bore beneath FM 649 needs a route and cover plan for the state highway right of way.
- Street service: A water or sewer run near Garceno Loop can pass beneath the street surface rather than requiring an open cut along the full route.
- Electric conduit: A conduit route near Rosales Drive starts with confirming the address line owner and exposing marked utilities along the bore path.
- Fiber drop: A fiber bore near Delia Lane can use a narrow underground route, with size and footage based on the service plan.
- Creek crossing: A proposed route near Arroyo Garceno needs channel review and a check for federal jurisdiction during planning.
- Replacement bore: Near Rosa’s Loop, potholing marked lines helps distinguish existing buried utilities from the proposed replacement route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Delia Lane in Garceno?
For a quote near Delia Lane, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. That lets us compare the proposed route with nearby streets and marked utilities before we set the bore scope.
The job scope sets the price through ground, crossings and logistics. Jimenez soil’s variable texture and mapped bedrock can change drilling time; pavement or concrete near FM 649 affects the setup; and any arroyo crossing needs route review. Pipe size, bore length, exposed utilities, pits, excavator time and sand backfill also matter. Garceno’s 729 road miles from Yukon affect mobilization, while high profile or emergency work can add planning needs.
Questions people ask about boring in Garceno
Does Trinity Boring Solutions take directional boring jobs in Garceno, Starr County?
Yes, we take directional boring work in Garceno and across Texas. The work is handled by our crews or by partner contractor crews from satellite yards we have vetted, not by a local Garceno office. You deal with Trinity from the first call through the bore log, including for a route near Garceno Loop.
Can you bore a line beneath Arroyo Garceno near Garceno?
A bore beneath Arroyo Garceno can be considered after the channel, access and route are reviewed. The stream is 0.2 miles from the mapped community boundary, so the exact crossing location matters. During planning, the proposed water crossing is checked for U.S. Army Corps of Engineers jurisdiction.
Who owns electric lines in Garceno, Starr County, and who confirms conduit specs?
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but the owner of a line at a particular Garceno address must be confirmed. The line owner confirms conduit requirements before a bore is planned, including for work near FM 649.
Does the city or county control Rosales Drive in Garceno, and can we avoid cutting it?
Garceno is an unincorporated community with no city government, so its streets fall under county or state authority. A bore near Rosales Drive can pass below the street instead of cutting its surface, subject to route conditions and the approvals that apply to the work.
Do homes and buried lines near Rosa’s Loop in Garceno date from the same period?
Housing records do not establish the age of buried lines. The American Community Survey 2019 to 2023 estimates give Garceno a median housing year of 2011, with 54 percent of units built in 2000 or later. For a replacement bore near Rosa’s Loop, we locate and expose marked utilities rather than assume line age from nearby homes.
Could groundwater or flood prone ground affect bore pits near Arroyo Garceno?
Seasonal water table soils are not mapped within 60 inches in Garceno, but flood prone soils cover 19 percent of the mapped area. Arroyo Garceno lies 0.2 miles from the community boundary, so a proposed crossing still needs site review for channel conditions and pit placement.
What bore sizes and lengths can Trinity handle for a Garceno job near Delia Lane?
We handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near Delia Lane, the pipe or conduit size, footage and the mapped variable ground help determine the equipment and plan.
How much notice does Texas811 need for a Garceno Loop bore, and what if marks move?
For work near Garceno Loop, request a locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as at least two working days. Do not request it more than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed through Texas811 before work continues.
What affects directional boring costs at Arroyo Garceno near FM 649 in Garceno?
The route and job details determine the price, with no single factor deciding it. Jimenez soil and mapped bedrock affect ground conditions; FM 649 pavement, utility crossings and any arroyo route affect the crossing plan. Pipe size, footage, pits, equipment time and Garceno’s 729 road miles from Yukon also shape the scope.
Where the Garceno facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Garceno
- U.S. Census Bureau, TIGER/Line 2024: Garceno boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Garceno population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Garceno housing units and year built
- Macrostrat geologic map compilation: map units under Garceno
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Garceno elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Garceno
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Garceno
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Garceno, Texas
Type the address of your job in Garceno. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Garceno
Same county: Rio Grande City · Las Lomas · Escobares · La Grulla · Mikes · East Alto Bonito · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.
