trinityboringsolutions.com

Ingleside Texas Directional Boring: Galveston Soil, FM 1069 and Kinney Bayou

Quick Answer: Ingleside is an incorporated city, so Main Street and other city streets belong to the city. We take directional boring, also called horizontal directional drilling (HDD), for crossings such as FM 1069 in Ingleside, Texas. Main Street is 590 road miles from our Yukon, Oklahoma main office, and the route also has Union Pacific track crossings. Fine sand covers 59 percent of the mapped surface, so the hole needs support against sloughing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ingleside bores at a glance

  • Incorporated city in San Patricio County, Texas. Population 10,155 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 590 miles, about 11.4 hours of driving.
  • Ground: Galveston soil is mapped on 45 percent of the area, with fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1069, Texas State Highway 361, FM 2725 and FM 3512. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: Union Pacific, with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Kinney Bayou.
  • Public water: City of Ingleside, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Main Street in Ingleside?

We take directional boring work in Ingleside, including routes along Main Street and connections crossing FM 1069. As Ingleside is incorporated, we plan around city ownership when boring its city streets. The Census Bureau Vintage 2024 estimate puts Ingleside at 10,155, which we consider when planning underground work. We install water, sewer, gas, electric conduit and fiber for runs beneath local streets or between properties.

Our main office is in Yukon, Oklahoma, and Ingleside work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our work ranges from 3/4 inch service lines to 48 inch casing; a short Main Street service and a large casing bore call for different setups. The family business began in 1965, and directional boring has been part of the work since 1982.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Galveston soil affect drilling in Ingleside?

The USDA soil survey maps Galveston soil across 45 percent of Ingleside, while fine sand is the leading surface texture at 59 percent. At about 40 inches below the surface, fine sand covers 46 percent of the mapped area, and the average clay content at that depth is 20 percent. We use mapped patterns as planning context for Ingleside boring, not as a substitute for test borings. For a route near Main Street, the local mix matters because sandy ground can cave behind the drill head while clay can cling to tooling.

USDA soil survey, inside the Ingleside city limitsWhat is mapped
Soil series mappedGalveston 45 percent, Raymondville 11 percent, Narta 9 percent, Aransas 7 percent and Calallen 7 percent
Texture at the surfacefine sand 59 percent, clay loam 11 percent and clay 11 percent
Texture about 40 inches downfine sand 46 percent, sandy clay loam 23 percent and clay 21 percent
Engineering class about 40 inches downsilty sand (SM) 45 percent, lean clay (CL) 26 percent and fat clay (CH) 19 percent
Average clay content about 40 inches down20 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches68 percent of the area
Flood prone soils52 percent of the area
High corrosion risk for uncoated steel36 percent of the area

We read the map as showing no bedrock in Ingleside’s top five feet, while deeper rock remains possible. The USDA soil survey maps a seasonal water table within 60 inches across 68 percent of the area and flood prone soils across 52 percent, so pits and wet ground need attention near Kinney Bayou. We account for the mapped high steel corrosion risk across 36 percent when planning boring work in Ingleside. Barrier island deposits of Pleistocene age are described as mostly fine grained sand, which can need fluid support to keep the bore open.

How do we drill Ingleside’s fine sand?

Ingleside’s fine sand can fall in behind the bit, while its mapped wet areas can fill an entry pit. We plan the bore path around the route, keep the hole supported and track the drill below streets such as 4th Street.

  1. Fine sand is mapped across 59 percent of Ingleside’s surface, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. Because the seasonal water table is mapped within 60 inches across 68 percent of the city, we keep pits small and plan for pumping near Kinney Bayou.
  3. Before a bore approaches marked lines near the City of Ingleside water system or a confirmed electric owner, we hydrovac pothole to check actual depth.
  4. At FM 1069 or Union Pacific track crossings, we track the drill head from above and log depth and pitch as the bore advances.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

Where does a line have to go under FM 1069 in Ingleside?

FM 1069 runs 8.7 mapped roadway miles inside Ingleside, and Texas State Highway 361 runs 5.5 miles within the limits. FM 2725 and FM 3512 are also local state highways. Texas State Highway 35 and Texas State Highway 35 Business lie outside the city limits, 1.0 and 1.2 miles away. Main Street is the longest named street at 6.94 miles; Avenue A covers 2.51 miles and 4th Street covers 2.24 miles. A bore route must account for pavement and any marked utilities along those corridors.

CrossingTypeMapped extentWho has a say
FM 1069State highway8.7 roadway miles insideState highway office
Texas State Highway 361State highway5.5 roadway miles insideState highway office
FM 2725State highway1.3 roadway miles insideState highway office
FM 3512State highway1 roadway miles insideState highway office
Texas State Highway 35Highway nearby1 miles outsideState highway office
Texas State Highway 35 BusinessHighway nearby1.2 miles outsideState highway office
Union PacificRailroad4.34 track miles insideThe railroad
Kinney BayouStream1.37 channel miles insideChecked for Corps of Engineers jurisdiction
Swan LakeLake or pond5 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.34 track miles inside Ingleside, and public records map 9 street and rail crossings in the city. A track crossing needs an agreement with the railroad, which sets crossing conditions. Kinney Bayou has 1.37 channel miles within the limits, with 1 mapped street crossing of a named stream. Swan Lake is also inside the city. Those water features can affect the route and call for a jurisdiction check during crossing planning.

Who has to sign off on bore work in San Patricio County in Ingleside?

Ingleside’s city streets belong to the city, while work in the right of way of FM 1069 or another state highway needs a TxDOT utility permit. The line owner, not our drilling crew, submits the application through TxDOT’s RULIS system, and the TxDOT Corpus Christi District reviews it. We prepare the bore plan and profile and work under the utility owner’s permit. TxDOT cover rules set the starting depth: electric and communication lines need 60 inches at crossings and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. A permit can require another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities cross routes near the City of Ingleside system?

For underground work in Ingleside, we recognize the City of Ingleside public water system serves 10,106 people through 3,479 service connections and uses purchased surface water. AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County, but the line owner must be confirmed for the address before planning a conduit bore. Near a City of Ingleside water line or an electric route, we use hydrovac potholing to expose each marked utility before drilling close to it; surface marks do not show its depth.

Line ownerWhat it isSourceSize
City of InglesidePublic water systemSurface water bought from another system3,479 connections, 10,106 people served
AEP Texas Central and San Patricio Electric CooperativeElectric utilities reporting service in San Patricio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Ingleside’s median housing year at 1994. The estimates show 12 percent of homes built before 1960, 48 percent from 1960 to 1999 and 40 percent in 2000 or later. A 4th Street project may involve an older line replacement or a service for newer housing. We expose marked utilities along the planned bore path first, including near the City of Ingleside water system.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Ingleside near Ingleside on the Bay?

Ingleside is primarily in San Patricio County, with a small part in Nueces County, and sits at an elevation of 15 feet across 16.9 square miles. We use Ingleside’s ZIP codes, 78362, 78374 and 78336, as location details when coordinating underground boring work. Ingleside on the Bay is 2.9 miles south; Gregory is 6.2 miles northwest, and Aransas Pass is 7.1 miles northeast. Portland, the nearest larger city, is 7.7 miles west. Sinton, the county seat, is 21.3 miles northwest. Ingleside is 590 road miles and a 11.4 hour drive from our Yukon yard.

Places near Ingleside

Which jobs call for a bore near 4th Street in Ingleside?

  • Highway crossing: A route beneath FM 1069 can keep the highway surface intact while connecting utilities on opposite sides.
  • Water service: A service near the City of Ingleside system needs a planned route around marked water lines and other utilities.
  • Fiber drop: A fiber conduit along Main Street can pass beneath pavement without opening a trench across the street.
  • Creek crossing: A Kinney Bayou bore needs a route planned below the channel and a check for federal jurisdiction.
  • Rail crossing: A bore beneath Union Pacific track needs the railroad’s agreement and crossing conditions before work proceeds.
  • Park connection: A line serving a property near Live Oak Park can be routed beneath a driveway or street with entry pits in soil.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for an Ingleside quote near Union Pacific?

A map pin matters near Union Pacific track or Kinney Bayou because the exact crossing point changes the route and access plan. Send the Ingleside address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us check the route against FM 1069, nearby tracks and other marked crossings.

In Ingleside, fine sand is the first price consideration because it can cave behind the drill and may need staged reaming and fluid support. The route length and pipe or conduit size matter next, along with marked utilities to expose, pavement on FM 1069, and any Kinney Bayou crossing. Pit work, sand backfill, excavator time and emergency timing also affect the scope. Mobilization reflects the 590 road miles from Yukon.

Questions people ask about boring in Ingleside

Does Trinity Boring Solutions take jobs in Ingleside and San Patricio County?

Yes. We take directional boring work in Ingleside and across Texas, planning each underground route for its local setting. Our own crews and partner drilling contractors from vetted satellite yards can staff the work, while Trinity remains the point of contact from the first call through the bore log. The route may be along Main Street or across FM 1069.

Will an Ingleside bore hit rock below Galveston soil?

The mapped information does not show bedrock in Ingleside’s top five feet, but it cannot rule out deeper rock. The geologic map identifies Pleistocene barrier island deposits, described as mostly fine grained sand. A planned bore near Galveston soil still needs a route and depth suited to the actual ground.

Who approves an Ingleside bore under FM 1069?

For work in FM 1069 right of way, the line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Corpus Christi District reviews it. We provide the bore plan and profile and work under the owner’s permit. The cover depth is set by line type and permit conditions.

What does an Ingleside bore under Union Pacific track require?

A crossing beneath the 4.34 miles of Union Pacific track inside Ingleside needs an agreement from the railroad. That agreement sets conditions such as casing, depth and flagging. If the proposed line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.

Can a line be bored under Kinney Bayou in Ingleside?

A bore under Kinney Bayou can be considered if the route and ground conditions support it. The stream has 1.37 channel miles within Ingleside, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Flood prone soils are mapped across 52 percent of the city.

Who owns Ingleside’s public water system, and where does its water come from?

For underground planning in Ingleside, we account for the City of Ingleside owning the public water system, which uses purchased surface water. In Ingleside, we plan underground work with the public water system’s scale in mind: it serves 10,106 people through 3,479 service connections. For a bore near that system, we locate and expose marked lines before drilling near them so the planned route accounts for existing water infrastructure.

Can I reach Trinity after hours for an urgent Ingleside bore on 4th Street?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work, including a request near 4th Street. The first details to share are the location, what needs to go underground and any known road, utility or drainage crossing.

How early should I request an 811 locate for an Ingleside bore near Main Street?

Paint near Main Street shows utility position, not depth. Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of directional boring in Ingleside near FM 1069?

Fine sand, the length and size of the bore, and utilities that need exposure are key factors around FM 1069. Pavement, Kinney Bayou or other drainage crossings, pit and excavator time, sand backfill, and emergency timing also affect the job. The 590 road miles from Yukon affect mobilization.

Where the Ingleside facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ingleside

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ingleside, Texas

Type the address of your job in Ingleside. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ingleside

Same county: Sinton · Mathis · Taft · Odem · Taft Southwest · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City · Morgan Farm · San Patricio · Rancho Chico · Lakeside. All counties: Texas county list.